스탠다드 모터 프로덕츠(SMP) 2026년 3분기 실적 발표 콘퍼런스 콜: 사상 최대 EBITDA 및 레버리지 축소

스탠다드 모터 프로덕츠(NYSE: SMP)가 2026 회계연도 3분기 실적 발표에서 지속적인 매출 성장과 분기 역대 최고 조정 EBITDA, 예상보다 빠른 부채 감축 성과를 발표했다. 별도로 명시하지 않는 한, 매출 수치에서 관세 환급에 따른 회계적 영향은 제외된다.

핵심 요약

• 조정 기준 3분기 순매출은 전년 동기 대비 2.8% 증가했으며, 연초 대비 누적 매출은 6% 늘어났다.
• 조정 EBITDA는 분기 역대 최고치인 6700만 달러를 기록했다. 이는 순매출의 13%에 해당하며 전년 동기 대비 490만 달러 증가한 수치다.
• 비GAAP 희석 주당순이익(EPS)은 1.54달러로 전년 동기 대비 13.2% 증가했다.
• 차량 제어(Vehicle Control) 부문 매출은 6% 증가했고, 니센스(Nissens) 매출은 7.6%, 엔지니어드 솔루션(Engineered Solutions) 매출은 4.9% 성장했다. 반면 온도 제어(Temperature Control) 부문 매출은 연초 고객사들의 대규모 프리시즌 주문 영향으로 4.1% 감소했다.
• 순부채는 3억 8190만 달러로 줄어들었으며, 레버리지 비율은 EBITDA 대비 1.8배로 낮아져 회사의 연말 목표치인 2.0배를 한 분기 앞당겨 달성했다.
• 경영진은 2026 회계연도 전체 매출 성장률 전망치를 한 자릿수 중하위권, 조정 EBITDA 마진율 전망치를 11%~12%로 유지했다.

주요 재무 데이터

사업 및 영업 성과

차량 제어

차량 제어 부문의 3분기 순매출은 2억 950만 달러로 전년 동기 대비 6% 증가했다. 매출 증가, 우수한 제품 믹스, 캔자스주 쇼니 신규 물류창고의 초기 최적화 효과에 힘입어 조정 EBITDA 마진율은 13.6%로 전년 동기 대비 개선됐다. 이 같은 상승 요인은 매출원가 전반의 지속적인 인플레이션 압력을 상쇄했다.

경영진은 정비소 대상 제품 공급 원활화를 위해 고객사들이 전략적 재고 투자를 이어갔다고 설명했다. 차량 제어 부문의 연초 대비 누적 매출은 5%를 약간 상회하는 증가율을 기록했다.

또한 SMP는 합작법인을 통해 태국에 위치한 텍스트롱(Techstrong)의 센서 제조 사업 지분 50%를 인수했다. 경영진은 이번 투자로 공급망 통제력이 강화되고 저비용 제조 능력이 확충되는 한편 중국 관련 리스크 노출이 줄어들 것으로 기대하고 있다.

온도 제어

온도 제어 부문 매출은 역대 최고치를 기록했던 전년 동기 대비 4.1% 감소한 1억 3870만 달러를 기록했다. 경영진은 상반기 대규모 프리시즌 주문에 따른 고객사 구매 시기의 계절적 요인을 매출 감소 원인으로 꼽았다.

연초 대비 누적 매출은 4%를 약간 상회하는 수준을 유지했으며, 고객 POS(판매시점 정보관리) 활동은 한 자릿수 중반의 성장률을 보였다. 3분기 조정 EBITDA 마진율은 생산량 감소와 멕시코 페소화 강세 압력으로 인해 14.9%로 하락했다. 9개월 누적 조정 EBITDA는 전년과 비슷한 수준을 유지했다.

회사는 니센스의 제품 전문성과 공급망 기반을 활용해 북미 지역에서 프리미엄 에어컨 콘덴서 풀 라인업 프로그램을 출시했다. 다만 경영진은 해당 프로그램이 신규 사업인 만큼 실적에 유의미한 기여를 하기까지는 시간이 걸릴 것이라고 덧붙였다.

니센스

니센스 매출은 유난히 무더웠던 유럽의 여름철 에어컨 제품 수요에 힘입어 7.6%(650만 달러) 증가했다. 유로화 약세가 약간의 환율 악재로 작용했으나, 연초 대비 누적 매출은 8% 가까이 증가했다.

조정 EBITDA 마진율은 매출총이익률 개선과 판매비와관리비(SG&A) 레버리지 효과에 힘입어 18.2%로 상승했다. SMP는 또한 북미 사업부의 제품 역량을 활용해 이그니션 코일, 에어컨 호스, 에어 도어 액추에이터 등으로 니센스의 유럽 제품 라인업을 확장하고 있다.

경영진은 신규 카테고리에 대한 고객의 반응이 당초 기대를 상회하고 있다고 밝혔다. 다만 매장 입점 및 이후 재주문이 3억 달러가 넘는 규모의 이 사업부 실적에 반영되기까지는 시간이 다소 걸릴 것이라고 덧붙였다.

엔지니어드 솔루션

엔지니어드 솔루션 매출은 대부분의 시장에서 성장을 나타내며 3분기 4.9%, 연초 대비 누적 11.1% 증가했다. 인플레이션으로 인한 매출총이익률 감소 영향으로 조정 EBITDA 마진율은 전년 동기 대비 감소한 9.6%를 기록했으나, 영업비용 레버리지 개선이 이를 일부 상쇄했다.

경영진은 2025년 하반기 해당 부문의 실적이 전분기 대비 반등함에 따라 향후 전년 동기 대비 기저효과 부담이 커질 것이라고 지적했다.

경영진 가이던스

SMP는 2026 회계연도 전체 실적 전망을 다음과 같이 유지했다.

• 한 자릿수 중하위권 퍼센트 범위의 매출 성장률.
• 순매출 대비 11%~12% 수준의 조정 EBITDA 마진율.
• 북미 및 유럽 시장의 지속적인 모멘텀과 엔지니어드 솔루션 부문의 더욱 안정적인 환경.

경영진은 매출 성장이 마진율을 뒷받침할 것으로 보면서도, 원가 기준의 관세 전가와 신규 물류창고 가동 확대에 따른 물류비용 증가가 유의해야 할 부담 요인으로 작용하고 있다고 설명했다.

해당 전망치에는 지속적인 관세 변화, 지정학적 여건과 관련된 인플레이션, 고객사의 공급망 금융 프로그램에 영향을 미치는 향후 금리 변동 영향은 제외되어 있다.

리스크 및 주요 관전 포인트

• 여러 사업 부문에 걸쳐 인플레이션이 매출원가에 계속 압박을 가하고 있다. SMP는 부품 조달, 자체 제작 대 외부 구매 검토, 공장 효율화 프로그램 및 고객 판매가 조정을 통해 이에 대응할 계획이다.
• 관세 환급은 보고된 매출 및 매출원가에 영향을 미쳤으며, 향후 관세 변동은 가이던스에서 제외되어 있다.
• 온도 제어 부문은 계절성이 강해 분기별 고객 구매 시기가 크게 변동될 수 있다.
• 멕시코 페소화 강세 및 유로화 약세로 인한 압박 등 환율 변동이 실적에 영향을 미쳤다.
• 엔지니어드 솔루션 부문은 2025년 하반기 회복세 이후 역기저효과에 직면해 있다.
• 캔자스 물류센터는 추가적인 최적화 및 제품 이전 작업이 더 필요하며, 경영진은 이 과정이 향후 4~5분기 동안 지속될 것으로 예상하고 있다.

애널리스트 Q&A 주요 내용

경영진은 니센스의 3분기 성장이 에어컨 제품군에 집중되었으며 냉각 제품군은 소폭 증가했다고 밝혔다. 엔진 효율성 제품군은 주문 시점 차이로 인해 감소했으나 연초 대비 누적 기준으로는 두 자릿수 성장을 기록했다.

시장 점유율과 관련해 경영진은 고객사 확대와 관련 부품을 패키지화한 에어컨 키트 판매에 따른 단가 상승으로 온도 제어 부문의 점유율이 확대되었다고 판단했다. 다만 점유율 상승폭을 구체적 수치로 밝히지는 않았다.

신규 카테고리와 관련해 경영진은 SMP가 기존 공급업체를 대체해야 한다는 점을 강조했다. 북미 콘덴서의 경우 더 넓은 에어컨 시스템 커버리지를, 유럽 이그니션 코일의 경우 중국산 공급망 대신 유럽 내 생산을 통해 경쟁력을 확보할 수 있을 것으로 보고 있다.

온도 제어 제품에 대한 고객사의 재고 수준은 적정한 상태로 평가되었다. 경영진은 이로 인해 2027년 프리시즌 주문량이 감소할 수 있으나, 10월의 따뜻한 날씨가 추가적인 재고 소진을 뒷받침할 것으로 내다봤다.

신규 캔자스 물류센터로의 이전은 계획대로 진행되었으며, SMP는 인근의 기존 물류창고에서 사실상 철수를 완료했다. 향후 작업은 효율성 개선과 추가 제품의 시설 이전에 집중될 예정이다.

실적 발표 전문

전체 실적 발표 컨퍼런스 콜 녹취록

경영진 발표

Operator

Good day, everyone, and welcome to the Standard Motor Products Third Quarter 2026 Earnings Call. [Operator Instructions] Please note today's call will be recorded, and I will be standing by should you need any assistance.

It is now my pleasure to turn the conference over to Tony Cristello, Vice President of Investor Relations. Please go ahead.

Anthony Cristello

Thank you, Chloe, and good morning, everyone. Thank you for joining us on Standard Motor Products Third Quarter 2026 Earnings Conference Call.

With us today are Larry Sills, Chairman Emeritus, Eric Sills, Chairman and Chief Executive Officer; Nathan Iles, Chief Financial Officer; and Jim Burke, Director.

On our call today, Eric will give an overview of our performance in the quarter, and Nathan will then discuss our financial results. Eric will then provide some concluding remarks and open the call up for Q&A.

Before we begin this morning, I'd like to remind you that some of the material that we'll be discussing today may include forward-looking statements regarding our business and expected financial results. When we use words like anticipate, believe, estimate or expect, these are generally forward-looking statements. Although we believe that the expectations reflected in these forward-looking statements are reasonable, they are based on information currently available to us and certain assumptions made by us, and we cannot assure you that they will prove correct. You should also read our filings with the Securities and Exchange Commission for a discussion of the risks and uncertainties that could cause our actual results to differ from our forward-looking statements.

I'll now turn the call over to Eric Sills, our CEO.

Eric Sills

Well, thank you, Tony, and good morning, everyone, and welcome to our third quarter earnings call. Overall, we are quite pleased with our performance in the quarter. Our top line grew by 2.8% when adjusting for the accounting treatment of tariff refunds, which Nathan will explain further in his remarks. And year-to-date, we are now up 6%. We also generated a record setting $67 million in adjusted EBITDA in the quarter, along with strong operating cash flows, which has allowed us to surpass our year-end leverage target achieving a 1.8x leverage ratio.

I'll walk through each operating segment and its performance in the quarter. And please note that all future mentions of sales through my remarks are also adjusted for the tariff refund treatment.

Starting with vehicle control. Sales were strong, up 6% and are up a bit over 5% on the year. Customers have been making strategic inventory investments as they pursue commercial market share. This is a product category that is heavily DIFM, and as such, distributors have been focused on having the best in-market availability for the repair shops. And we believe that the strategy is working as their POS has remained in positive territory all year in a challenging environment.

Our other North American aftermarket segment, Temperature Control was down about 4% against a record-setting third quarter last year. As we always explain, customers' purchases can move around quarter-to-quarter in this highly seasonal category. This year was very front-loaded. We are up 10% at midyear as customers placed very large preseason orders and in the third quarter, they were able to sell more from their own shelves. So if you look at it on a year-to-date basis, we are up a bit over 4% and their POS is also up mid-single digits. It's also important to note that this is coming off 2 previous years of double-digit growth.

Now let me speak about Nissens, our European aftermarket business. Sales were quite strong in the quarter, up 7.6% with most of the growth in air commissioning products. After a late start to the season, Europe set temperature records across much of the continent. We are now up nearly 8% on the year. And while some of the lift in the first half was due to favorable currency conversion, we have now lapped. Nissens continues to outperform in a challenging market with nondiscretionary categories and a very strong program that has helped us grow our share.

Now let me speak to our non-aftermarket segment Engineered Solutions. The strong demand experienced in the first half continued with third quarter sales up nearly 5%, bringing year-to-date growth to over 11%. As a reminder, 2025 was a tale of 2 halves. A soft first half followed by a sequential rebound. And while that rebound has continued, the comparisons can get tougher from here. But I'd like to now share some of the other exciting things going on around the company.

Few months ago, we entered into a joint venture agreement with our long-standing partner, Techstrong, where we acquired 50% of their sensor manufacturing operation in Thailand to support our Vehicle Control segment. We see this as an excellent strategic investment hitting on several key pillars. It reinforces our commitment to being a basic manufacturer of key products. It provides additional control of our supply chain and it launches a low-cost manufacturing operation on which to build while de-risking us from China.

We are well underway and are planning to move more production into this business and see it as an excellent new asset in our global manufacturing footprint.

Within Temperature Control, we are excited to have just announced a full-line premium A.C condenser program to the market. This is a category that Nissens has been very strong in, and we are able to leverage their product knowledge and supply base to accelerate a launch here in North America. We are featuring this next week at the big trade show in Las Vegas and are expecting some nice buzz.

For Nissens, as previously discussed, we launched 2 new categories in Europe in the beginning of the year, both of which are leveraging synergies with our North American business. We launched ignition coils, which is one of the biggest categories within Vehicle Control. And here, our primary manufacturing location for these is in Poland, and we believe that the Europe-for-Europe story is resonating with customers.

We also launched A/C hoses, a key part of the air conditioning system that was a gap in the Nissens range and one where we were a basic manufacturer in one of our Chinese joint ventures. Both of these new categories are now starting to gain some shelf space that it will take a while to see this reflected in our numbers.

We also just announced the third new category in Nissens, Air Door Actuators, another strong product group in the North American Temp Control offering. So as you can see, we are now getting into the fast lane with the cross-selling synergies that the Nissens acquisition has brought us.

Lastly, I would like to discuss recent leadership changes previously announced. Nathan Iles has elected to take on a new CFO role as an unrelated company. Today is actually his last day with us. Nathan joined us in 2019 and over his 7 years of service, he was an excellent leader and contributor and helped to make us the company we are today. And while we are sad to see him go, we wish him all the best in his next chapter.

We're extremely grateful and fortunate that Jim Burke has agreed to return as interim CFO while we conduct our search for a permanent replacement. Jim has been with us for well over 40 years and only just stepped down as Chief Operating Officer a few short months ago. Prior to being COO, Jim served as our CFO for 20 years before handing it off to Nate. So needless to say, Jim knows the company and the role better than anyone, and we expect a completely seamless transition.

So with that, let me hand this over to Nathan for the financial details.

Nathan R. Iles

Al right. Thank you, Eric. Good morning, everyone. As we go through the numbers, I'll first give some color on the results for the quarter by segment and at the consolidated level, and then I'll cover some balance sheet and cash flow metrics and finish with an update on our financial outlook for the full year of 2026.

Before I talk about our third quarter results, I would like to note that we received additional refunds in Q3 for amounts previously paid under the IEEPA tariff regime as per our normal practice of treating tariffs as a pass-through cost. Accounting for these tariff refunds impacted both our sales and cost of goods sold during the quarter. I'll be discussing our results on a non-GAAP basis and excluding the impact of accounting for tariff refunds.

First, looking at our Vehicle Control segment. You can see on this slide that net sales of $209.5 million in Q3 were up 6%. While the segment had an easier compared to last year's third quarter, it also benefited from solid product demand across all categories, reflecting our customers' continued positive momentum in their sales. Vehicle Controls adjusted EBITDA of 13.6% in the third quarter was higher than last year, and the improvement was primarily the result of higher gross margin on higher sales and favorable mix, but also improved operating expenses as a percentage of sales as we saw optimization efforts begin to take effect in our new warehouse in Shawne, Kansas. These favorable items offset ongoing headwinds from inflationary pressures across our many various cost of goods.

Turning to Temperature Control. Net sales in the quarter for that segment of $138.7 million were down 4.1% for the reasons Eric noted before. Temperature Controls adjusted EBITDA was lower than last year, coming in at 14.9% of net sales. The decline was primarily related to lower production volumes across our facilities as the high season wound down as well as cost pressure from the Mexican peso that has been stronger than in the past for much of this year. While our Q3 EBITDA margin was lower than last year, it's important to note that adjusted EBITDA is right in line with last year, the first 9 months.

Looking at Nissens. Sales grew by $6.5 million or 7.6%, reflecting strong sales growth from a particularly hot summer across most of Europe, partly offset by a modest headwind from a weakening euro versus the U.S. dollar. Adjusted EBITDA for Nissens of 18.2% of net sales in Q3 was higher than last year mainly as a result of improvements in both the gross margin rate and SG&A as a percent of sales due to higher sales in the quarter.

Sales for our Engineered Solutions segment in the quarter were up 4.9% and we were pleased to see growth across most markets. We expected sales increases in this segment to be in the low to mid-single-digit range beginning this quarter as we lapped the impact of cyclicality in the segment. Year-to-date, sales are up 11.1% for Engineered Solutions. Adjusted EBITDA for Engineered Solutions in the quarter of 9.6% was down from last year and gross margin was lower due to inflationary headwinds, but partly offset by improved operating expense leverage on higher sales.

To wrap it all up, put it all together across the 4 segments. For Q3, consolidated net sales increased 2.8%, while adjusted EBITDA was 13% of net sales and $4.9 million better than last year. Further, non-GAAP diluted earnings per share were up 13.2% to $1.54 in the quarter.

Looking now at cash flows. Cash generated from operations for the first 9 months of $207.2 million were $121.5 million better than last year, driven by a significant reduction in inventory levels as well as timing of tariff refunds received. We were pleased to see the continued improvement in inventory levels after coming into the year with some higher inventory balances to support our sales growth.

Investing activities show capital expenditures of $23.5 million, which is lower than last year as capital spending related to our new DC is complete. Financing activities showed payments of $22 million of dividends as well as $125.1 million in repayments on our credit agreement.

Our net debt stood at $381.9 million, down significantly from last year. We finished the quarter with a leverage ratio of 1.8x EBITDA surpassing our previously stated target of 2x 1 quarter ahead of schedule.

Before I finish, I want to give an update on our sales and profit expectations for the full year of 2026, which is unchanged from before. We expect sales growth to be in the low to mid-single-digit percentage range, driven by continued momentum in North America and Europe and more stable market conditions in our Engineered Solutions segment.

Our outlook for adjusted EBITDA margin is a range of 11% to 12% net sales and reflects margin benefit of sales growth, but also some continued margin compression from passing through tariffs at cost and elevated distribution costs as we ramp up our new Warehouse.

As we noted in our release this morning, our outlook does not include the impact of ongoing changes in the tariff environment, inflationary impacts from geopolitical conditions or future changes in interest rates on our customer supply chain financing programs. In connection with our adjusted EBITDA outlook, we expect interest expense, income taxes and depreciation and amortization to be in the ranges shown on the slide.

To wrap up, we're pleased with how our year is turning out so far with both strong sales growth and good profitability. We thank everyone at S&P for helping us turn in these results.

I'll turn the call back to Eric for some final comments on the quarter.

Eric Sills

Thank you, Nathan. In closing, let me spend a moment discussing on how we're viewing things for the balance of the year and beyond. Even in this challenging environment, we've enjoyed several consecutive quarters of solid performance. We've made great strides in diversifying our business with new product categories, geographies and end markets, all with the focus on seeking complementary benefits.

Meanwhile, we've never taken our foot off the gas in servicing our legacy business, the North American aftermarket where we believe we excel and which still represents 2/3 of what we do. The industry itself continues to demonstrate its stability and resilience in the face of turbulent times and within it, we believe we tend to outperform. We have great categories. Nondiscretionary and broad in nature and heavily oriented to DIFM where the aftermarket is expected to grow and our value proposition to our customers a comprehensive vehicle coverage targeting repair professionals with quality products and brands they trust creates a stickiness up and down the supply chain.

Nissens is a fantastic new leg to our stool and is exceeding our expectations. They are a great company in their own right. And as part of S&P, they provide business diversity while being similar enough to generate meaningful synergies, both to the top and bottom line and on both sides of the ocean.

Our Engineered Solutions business continues its rebound and is a strong complement to our core business, running through shared plants with common product categories, instilling quality rigor in our operations and providing us with an OE pedigree. Our commitment to manufacturing with a footprint that is largely derisked from China allows us to navigate supply chain challenges and presents a competitive advantage. So we remain very bullish about the future.

Before we open it for questions, I do want to hand it back to Nathan for some final thoughts.

Nathan R. Iles

All right. Thank you, Eric. I just wanted to make a few closing comments. As I said earlier -- as we said earlier today, today is my last day with SMP before taking a different CFO role. I'd like to say thank you to a number of people. First, to Eric and the entire Board for giving me the opportunity to work at SMP these last 7 years, it's been wonderful. Second, to our finance team here, which works tirelessly to support the business, it's been a privilege to work with you. And finally, to all my colleagues and friends across SMP, you're embraced on both the way in and way out mean more than you can know. Your caring for and commitment to the company is really incredible.

Jim, I'll hand it over to you for some final comments.

James J. Burke

Okay. Nathan. To start, I want to add and thank Nathan for the past 7 years for his leadership in the CFO role. He has helped build and develop a very competent finance team that will continue to execute in his absence. As Eric noted in the past 7 years, I had held the COO role, and I've been integrally involved in the operations, strategy and financial review of the company. With that background, I look forward to assisting on our executive search for a new CFO. And again, wish Nathan all the best.

With that, we'll open it up for Q&A.

Operator

[Operator Instructions] And our first question comes from Scott Stember with ROTH Capital.

질의응답

Scott Stember

And Nathan, it was great working with you. I wish you all the best of luck in your new chapter. And that's really it. So on the business, just wanted to dig into Nissens a bit. It was nice to see that it looks like sell-through was up back up to traditional rates in that high single digits. I know that Temperature Control drove the business. So maybe talk about some of the other categories and also maybe just layer that in and what you're seeing in the market so we can gauge how share gains are?

Eric Sills

Sure. So yes, much of the -- first of all, Scott, thank you for the nice comments about Nathan. As you look at the 3 subcategories that we break out the growth was largely in the air conditioning products, and it was really due to just an extremely hot summer across most of the continent and we saw that lift.

The other categories continue to do well. You saw that in cooling products. It was up slightly. The third category, which is the smallest, the engine efficiency categories. was down a bit. That was mostly just timing of some customer orders period to period. And if you look at the full year to date, we are seeing some nice double-digit growth in the category. So that was really more of a quarter-to-quarter timing issue. But all 3 of the segments are really very healthy and doing well.

Scott Stember

Got it. And how should we look at some of these newer products that you have put into the market over the last couple of quarters. It sounds like it's being very well received, but how should we expect that to be seen in your numbers as we exit this year and head into next?

Eric Sills

It will take a while before we see any real impact that they have. It takes a little while to get the customers to add it to their shelves and then to start to see that replenishment. We're getting very favorable response. I would put it ahead of schedule and ahead of our expectations, but across a $300-plus million business. It will take a little while for you to start to see the impact.

But we'll certainly keep you posted on it. On the new category here in North America condensers within our Temperature Control division, and this is brand new. We're really just announcing it next week in Vegas, and so more to come. But we see this as a category that, frankly, is overdue for us. It's a key part of the air conditioning system that's been a gap. We always knew that this was a category that Nissens could help jump start for us. So we're excited that we are there birthing it, but it will take a little while before we see anything really show in our numbers.

Scott Stember

Just one quick last one before I jump back into the queue, the guidance. A little bit of a caveat due to some of the recent inflationary persons that we've seen. But you also talked about how you expect to go into your usual playbook to offset that. How the initial conversations going? And just wanted to get your sense of how seamless that would be.

Eric Sills

If I understand the question, you're asking about inflation and our ability to navigate it. Is that what you're asking, Scott?

Scott Stember

Yes, exactly. Particularly given all the stacking of costs that we've seen over the last couple of years, how are you seeing that going forward?

Nathan R. Iles

Yes. Scott, it's Nathan. I'll take that one. So we are seeing inflationary pressures and really kind of in line with what you've heard others talk about. But we have the typical playbook that we run. We've talked about before, we have cost savings programs, whether it's make versus buy or sourcing plant efficiency projects that really help us offset inflationary headwinds year in and year out. And then we also expect to share some of the inflation just in terms of pricing with customers. So we continue to do that. We've been successful doing that and see the same way.

Scott Stember

So the usual playbook? Got it.

Nathan R. Iles

Yes.

Operator

[Operator Instructions]

We'll move next to Bret Jordan with Jefferies.

Bret Jordan

Great working with you. And Jim, good to have you back. And get some fresh batteries and the calculator. As you look at temperature control, and I think one of the large retailers yesterday was talking about type control being a strong category this summer. Do you see sort of share gain? It would seem like your customers might be outperforming some of the other players in the industry do you think sort of if you look at the growth of Temperature Control as an entire category, do you think you're gaining market within that?

Eric Sills

I do believe that we have seen some market share gains, mostly on the coattails of our good customers as they grow, we've been able to grow with them. But it also has to do with how we've evolved our program to be able to increase ticket size with the launch and really good market adoption of air conditioning kits so that you're selling all the related components along with it.

And so the overall market, I think, has been favorable the last couple of years as it gets longer and as the season tends to start earlier and later, but without a doubt, I also believe we're gaining some share, some on what we're doing, some on the backs of our good customers.

Bret Jordan

And then I guess a couple of sort of market size questions as you bring coils into the Nissens catalog and you bring condensers into the legacy standard temperature control catalog. And sort of how do you see these addressable markets, like if they gain traction, what would be the contribution to growth sort of on an incremental SKU category?

Eric Sills

It's a difficult thing project, and we certainly don't want to get ahead of ourselves, making any public statements. Historically, our new product introductions have been more new technologies, late-model coverage and bringing it to market to be first to shelf. This is really a bit new for us in bringing categories that are already out there and needing to displace the incumbents.

So we need to come in with a story that resonates and addresses any market concerns that customers have with their existing suppliers, we believe that across all of our launches, we have a strong story to tell. So if you think about an condensers, it's a natural fit to a program where they are very satisfied with the supplier for the balance of that program and allows them to have some one-stop shopping, including the inclusion of condensers in a kit, in an AC kit and I spoke a little bit about what we've done in Europe.

On the Nissens side, coils, we have a compelling story, where much of the aftermarket in Europe is Chinese coil programs. We're bringing in something that's manufactured within the European Union, and we think that, that is very well received. So we have to have a strong story to displace others on the shelf. We believe that we have that story. We're very careful on selecting categories where we do believe we have something to talk about.

Bret Jordan

Great. we'll see at Apex next week.

Operator

[Operator Instructions] We'll take a follow-up from Scott Stember with ROTH Capital.

Scott Stember

Yes, looking at temperature control, how are inventories looking as we head into the slower season?

Eric Sills

On our customer shelves?

Scott Stember

Yes. No on the customer shelf...

Eric Sills

Our visibility is a little bit dated, so we don't know what's happened over the last several weeks. What we see is that they are in good shape. Perhaps we won't see quite as much of a preseason order coming into next year due to those positions. But it's really where you would want them to be. And the season continued, really, October was warm in a lot of parts of the country, and so we would expect that inventory to continue to come down.

Scott Stember

Got you. And then the new DC in Kansas just checking how the cutover is going? And when will we be fully cut over?

Nathan R. Iles

Scott, it's Nathan. So the cutover has gone well. We did have a little bit of headwinds in terms of costs in the middle of the year, first of the year. But like I mentioned, we started to see that optimized in the third quarter.

In terms of getting out of the warehouse that we were in, in Kansas down the road, we're essentially out of that. And so now it's about optimizing, but then also bringing more products in from other locations as we get into 2027. So we'd expect to just continue to ramp that up as we go through the next 4 or 5 quarters.

Scott Stember

Got it. That's all I have, and Jim look forward to working with you again.

James J. Burke

Yes. Same here. Very good, Scott. Thank you.

Operator

And it does appear that there are no further questions at this time. I would now like to hand back to Tony Cristello for any additional or closing remarks.

Anthony Cristello

Okay. Thanks, Chloe, and we want to thank everyone for participating in our conference call today. We understand there was a lot of information presented, and we'll be happy to answer any follow-up questions you may have. Our contact information is available on our press release or Investor Relations website. We hope you have a great day. Thank you.

Operator

Thank you. This does conclude today's meeting. We appreciate your time and participation. You may now disconnect.