tradingkey.logo
搜尋

Patterson-UTI (PTEN) 2026 年第三季財報電話會議:定價收益與 2027 年需求

2026年10月30日 08:08
facebooktwitterlinkedin

Patterson-UTI 2026年第三季營收13.42億美元,季增9%;淨利2800萬美元,每股盈餘0.07美元;調整後EBITDA達2.64億美元。受惠美國陸上鑽井與完井活動回溫、定價提升及鑽井產品營收創歷史新高。管理層預期2027年自由現金流顯著改善,將優先改善現有業務報酬率與資本紀律,審慎評估產能擴充。

該摘要由AI生成

重點摘要

  • Patterson-UTI 公布 2026 年第三季營收為 13.42 億美元,季增 9%;歸屬於普通股股東的淨利為 2,800 萬美元,即每股 0.07 美元。
  • 調整後 EBITDA 為 2.64 億美元。調整後自由現金流較上半年大幅增加,管理層預計第四季自由現金流將持續強勁。
  • 美國合約鑽井平均為 101 座作業鑽機,季增 9%。平均日租金從 2026 年早期的 30,000 美元出頭上升至 35,000 美元左右,前沿日租金更高。
  • 完井服務定價較第二季成長中個位數百分比。管理層預計隨著鑽井活動增加及舊式柴油動力設備淘汰,完井需求將進一步增強。
  • 鑽井產品營收季增 21%,創下 2023 年收購 Ulterra 以來的歷史新高,主要得益於美國市占率擴大及國際市場成長。
  • 管理層預計美國陸上需求將在 2027 年進一步提升,同時維持資本紀律,將定價、報酬率和每股自由現金流置於產能擴充之上。

關鍵財務數據

指標2026 年第三季結果變動或背景資訊
總營收13.42 億美元季增 9%
歸屬於普通股股東的淨利2,800 萬美元每股 0.07 美元
調整後 EBITDA2.64 億美元不含出售鑽機與零組件的一次性收益
鑽井服務營收4.17 億美元美國作業天數 9,249 天;平均作業鑽機數 101 座
鑽井服務調整後毛利1.49 億美元受惠於鑽機數量增加及每日營收提升而改善
完井服務營收8.08 億美元定價較上季成長中個位數百分比
完井服務調整後毛利1.33 億美元壓裂砂與卡車運力限制削弱了作業活動
鑽井產品營收1.10 億美元季增 21%
鑽井產品調整後毛利5,100 萬美元自收購 Ulterra 以來的最高水準
資本支出1.41 億美元鑽井服務為 5,500 萬美元,完井服務為 6,300 萬美元
現金3.39 億美元5 億美元旋轉信貸額度項下無借款
股東回報6,200 萬美元包含庫藏股回購 200 萬股及每股 0.10 美元股利

淨利包含 1,800 萬美元的稅前其他營業收入,主要反映出售原本預計用於委內瑞拉的鑽機與零組件所產生的 2,200 萬美元利益。

業務與營運表現

鑽井服務

Patterson-UTI 的鑽機數量較 4 月低點增加了 16 座(或 18%)。扣除客戶特定升級後,重啟成本平均約為 每座鑽機 100 萬美元。

管理層表示,低成本重啟的數量相當有限。公司隨後量化說明,在當前價格水準下,具經濟效益可重新投入運作的鑽機約為 8 到 10 座。超出這些數量後,需要更高的日租金與更具保障的合約條款來支持額外資本支出。

針對更長水平井段及更深油井設計的升級鑽機需求最為強勁。Patterson-UTI 最近簽署了一份升級型 XC+ 鑽機的 三年期合約,日租金超過 45,000 美元。該鑽機具備 130 萬磅的載重能力,預計將於 2027 年交付。

公司也在評估國際市場機會,包括阿根廷。公司已出售用於委內瑞拉的 10 座交流電高規格鑽機及零組件,並可能供應額外設備。

完井服務

完井服務受惠於定價提升,但活動受到南德州砂石短缺以及二疊紀盆地卡車運力受限的壓制。管理層將這兩個問題視為暫時性,並表示營運已在第四季初恢復至最高效率。

過去幾年中,完井定價下跌了約 30%。Patterson-UTI 已收復該跌幅的約三分之一。管理層認為,視供需情況而定,有機會在 2027 年期間收復全部跌幅,甚至更多。

據公司估計,舊款柴油動力設備仍占美國現役完井馬力的約 20%。預計到今年底,Patterson-UTI 現役馬力的近 90% 將至少部分採用天然氣驅動。

公司計畫在 2027 年繼續使用 Emerald 100% 天然氣驅動的直驅資產替換退役的柴油設備,同時保持整體完井產能大致穩定。管理層表示,在定價和合約結構足以支持高於公司資本成本的報酬率之前,不會擴充產業產能。

鑽井產品

鑽井產品創下 Patterson-UTI 於 2023 年收購 Ulterra 以來的最高單季營收與調整後毛利。隨著客戶採用率、定價與市占率提升,美國市場營收成長速度超越整體產業活動。

國際營收亦呈現季增,由阿根廷創紀錄的營收領軍,不過與衝突相關的物流、安全和人員成本對中東業務造成了影響。

新型井下工具的營收季增超過 40%,約占部門營收的 5%。管理層預計 2026 年井下工具營收將較 2025 年倍增,隨後在 2027 年迎來又一個強勁成長的年份。

使用該公司鑽頭鑽掘的地熱進尺較去年同期翻了四倍。地熱業務占 2026 年營收比重仍低於 5%,但管理層預計其在 2027 年的成長速度將大幅超越整體業務。

管理層展望

指標2026 年第四季展望
鑽井服務平均鑽機數約 104 座鑽機,期末將高於此水準
鑽井服務調整後毛利約 1.5 億美元
完井服務調整後毛利約 1.4 億美元
鑽井產品調整後毛利季減 5% 至 10%
其他調整後毛利約與上季持平
管理費用約 7,000 萬美元
折舊、攤銷及減損費用約 2.2 億美元
2026 年資本支出淨額少於 6 億美元

完井服務展望假設定價提高、受正常季節性因素影響及潛在天氣延誤。鑽井產品預期的下滑,主要反映了中東(特別是沙烏地阿拉伯)預期活動的減少。

管理層預計美國產業活動在第四季將保持相對穩定,隨後隨著客戶預算重新設定,2027 年需求將再次提升。管理層亦預計 2027 年自由現金流將顯著改善,為戰略投資、股東回報及潛在的債務削減提供彈性。

風險與關注焦點

  • 除了剩餘 8 至 10 座較低成本的機組外,進一步重啟鑽機將需要實質上更高的資本和價格支援。
  • 儘管該公司在東北部和海恩斯維爾 (Haynesville) 的活動保持穩定,但以天然氣為導向的探勘活動仍存在較高不確定性。
  • 完井營運仍面臨壓裂砂供應、卡車調配運力、天氣及其他供應鏈限制的風險。
  • 天然氣驅動的直驅設備交貨交期超過一年,限制了產業新增供給的速度。
  • 中東地區的衝突可能會限制鑽井產品的短期成長,並增加物流、安全及人員成本。
  • 完井價格僅收復了先前跌幅的一小部分,管理層表示在報酬率獲得充分改善之前,不打算擴充產業產能。

分析師問答亮點

  • 鑽機產能:管理層表示,在當前價格下,約有 8 到 10 座鑽機能進行具經濟效益的升級與重啟。更大幅度的新增則需要更高的日租金與更好的條款。
  • 合約期限:當長約能抵銷重大升級成本時,Patterson-UTI 願意簽署較長期的合約。對於現有鑽機,在價格持續上漲之際,公司可能偏好較短的合約期。
  • 完井供給:管理層預計 2027 年水力壓裂需求將增加,但可用的可用產能極少。Patterson-UTI 計畫保持整體產能穩定,直到報酬率能夠支持擴產為止。
  • 天然氣設備:公司表示,天然氣與柴油之間每個車隊的年度燃料成本差異可達數千萬美元。這為 Emerald 直驅設備的差異化定價提供了有力支持。
  • 客戶結構:約 60% 至 70% 的完井服務營收來自美國前 15 大 E&P 勘探與生產業者。
  • 資本配置:管理層預期將繼續升級車隊品質,而非顯著增加產業供給。隨著現金流生成能力的改善,將考量戰略性產品收購、股東回報及債務削減。

法說會完整逐字稿


完整財報電話會議逐字稿

管理層陳述

Operator

Hello, everyone. Thank you for joining us, and welcome to Patterson-UTI's Third Quarter 2026 Earnings Conference Call. [Operator Instructions]

I will now hand the conference over to Mike Sabella, Vice President of Investor Relations. Mike, please go ahead.

Michael Sabella

Thank you, operator. Good morning, and welcome to Patterson-UTI's earnings conference call to discuss our third quarter 2026 results.

With me today are Andy Hendricks, President and Chief Executive Officer; and Andy Smith, Chief Financial Officer. As a reminder, statements that are made in this conference call that refer to the company's or management's plans, intentions, targets, beliefs, expectations or predictions for the future are considered forward-looking statements.

These forward-looking statements are subject to risks and uncertainties as disclosed in the company's SEC filings, which could cause the company's actual results to differ materially. The company takes no obligation to publicly update or revise any forward-looking statements. Statements made in this conference call include non-GAAP financial measures. The required reconciliation to GAAP financial measures are included on our website at patenergy.com and in the company's press release issued prior to this conference call.

I will now turn the call over to Andy Hendricks, Patterson-UTI's Chief Executive Officer.

William Hendricks

Thank you, Mike, and welcome to our third quarter earnings conference call. The recovery in U.S. onshore activity gained momentum during the third quarter with activity levels increasing significantly compared to earlier in the year. Against this backdrop, our business has performed very well, supported by strong field-level execution and investments in technology and premium assets that continue to improve pricing and further strengthen the quality of our customer portfolio.

At the same time, we generated strong free cash flow and maintained our solid balance sheet. Looking ahead, we believe Patterson-UTI is well positioned to benefit as the cycle continues to improve.

Customer demand for advanced technology is strengthening while constrained access to capital is limiting the ability or even the willingness of some of our competitors to invest. These dynamics are creating attractive opportunities across our core businesses. We will continue to pursue those opportunities with discipline, deploying capital only where we see compelling returns and the potential to deepen long-term customer relationships.

Our capital allocation priorities remain clear: target investments that improve our long-term return on capital and our free cash flow per share, preserve the strength and flexibility of our balance sheet and return capital to shareholders through dividends and share repurchases and if appropriate, reduce debt.

The macro outlook for U.S. onshore drilling and completions has improved dramatically. Overall, we see a healthy outlook into 2027 across our core oilfield services and products markets, particularly for premium equipment and technologies that improve efficiency, reliability and overall well economics. To date, the increase in U.S. onshore drilling activity has been led by private E&Ps, which is typical in the early stages of a recovery.

As we approach 2027, however, our conversations with larger public operators are gaining momentum. These customers are increasingly focused on premium technology, including advanced digital, automation and AI capabilities across our drilling rigs and frac fleets, larger rig structures designed for longer laterals and deeper wells and equipment capable of using natural gas as a fuel.

This is the market scenario we anticipated when we increased our CapEx budget earlier this year. Importantly, the performance gap between the industry's highest quality assets and the older, less efficient equipment continues to widen. As activity improves, we expect customers to increasingly prioritize technologies that lower total well cost, enhance operational performance and reduce fuel costs by using more natural gas. We believe this trend creates an increasingly favorable backdrop for Patterson-UTI.

For the fourth quarter, we expect industry activity to remain relatively steady compared with third quarter levels. As we move into 2027, as customer budgets reset and considering contracts we already have in place, we anticipate another step-up in demand with 2027 forward oil prices meaningfully higher than what our customers used to budget for '26. Overall, we expect oil-directed activity to strengthen further into 2027.

Based on the demand signals we see today, we believe public operators are likely to account for a significant share of the next round of rig additions.

On the natural gas side, the commodity backdrop has been more fluid, although activity across our businesses has remained stable. Our position in the Northeast continues to be steady, consistent with the historical characteristics of that market.

In the Haynesville, our activity has also remained stable despite greater volatility in the broader basin. While the overall trajectory of natural gas-directed activity remains less certain, customer demand is shifting toward the same advanced technologies we are seeing gain traction in the oil basins. As a result, we believe our activity is likely to increase even if aggregate demand across the natural gas basins remains relatively unchanged.

Over the long term, we continue to expect activity in natural gas basins to increase as global natural gas demand continues to grow.

Turning to Drilling Services. Activity strengthened during the quarter, and pricing continued to improve. Average rates have increased from the low $30,000 per day range earlier this year to the mid-$30,000 per day range with leading-edge day rates well above the average. Demand has been particularly strong for rigs emerging from our upgrade program with structurally enhanced rigs securing day rates several thousand dollars above our company average.

Importantly, demand for these upgraded rigs is highest among larger public and private operators. Several customers have indicated that they expect these rigs to remain integral to their Drilling Programs for multiple years, reinforcing our confidence in the durability of the opportunity.

By quarter end, our rig count was up 16 rigs or 18% from the April trough. Since activity bottomed, reactivation costs have averaged approximately $1 million per rig, excluding any incremental upgrades required to meet customer specifications. We have a limited number of low-cost rig reactivations remaining before seeing a material increase in our incremental capital and upgrade costs, at which point, additional reactivations would require significantly higher pricing to meet our return threshold.

Beyond these limited remaining reactivations, we currently expect growth to come primarily from higher pricing, stronger contract terms and longer durations and a greater focus on strategic customer programs rather than just further rig additions. Based on current demand, we could reach that level of U.S. activity in early 2027.

Internationally, we are seeing a growing pipeline of opportunities for our drilling rigs. The opportunities in Argentina are tangible and could develop in the near term. Given the attractive contract terms, we may choose to deploy a portion of our remaining Tier 1 rig fleet into that market.

For Venezuela, we have sold rigs and components for 10 AC electric high-spec rigs from the U.S. as well as multiple other rigs from our operations in Colombia. These rigs are actually of higher capacity than was originally used to drill the horizontal wells in the country when I lived there. We may also supply additional equipment to Venezuela.

Turning to Completion Services. Third quarter results improved sequentially, driven by a mid-single-digit increase in pricing from the second quarter. Our Completions team continues to work with many of the industry's leading operators who appreciate the value that we bring to their operations, reflecting the quality of our assets, the value of our digital investments, and our commitment to delivering what we believe is the market's premier Completion Services offering.

Results improved despite elevated nonproductive time across several fleets as portions of the completion supply chain tightened late in the quarter. In South Texas, industry-wide sand constraints during much of September resulted in substantial downtime for several fleets, while trucking availability in the Permian periodically limited sand deliveries to location.

We believe both issues were temporary and our operations have returned to full efficiency thus far in the fourth quarter.

Looking ahead, the medium-term supply and demand outlook for the Completions market is becoming increasingly constructive. The U.S. shale industry has added more than 50 drilling rigs since activity troughed this past spring and current completion activity does not yet reflect the incremental demand those additions are expected to generate. At the same time, higher diesel prices are materially increasing the operating costs of legacy diesel-powered equipment, which we estimate still represents around 20% of the U.S. completion industry horsepower in operation today.

These diesel-powered assets were only marginally competitive before the recent increase in diesel prices and even with the improved completion pricing for some equipment are increasingly uneconomic to maintain.

In short, we expect completion demand to move higher over the next several quarters as available industry horsepower likely declines through the accelerating retirement of older diesel assets.

The replacement requirements are further challenged by extended equipment lead times. In our view, the direct drive systems represent the best new technology available, but lead times now exceed one year because these systems are produced on manufacturing lines that also support behind-the-meter power equipment for burning 100% natural gas. These dynamics create an attractive outlook for equipment capable of operating on natural gas.

By year-end, nearly 90% of our active horsepower will be powered at least in part by natural gas. As we expect the quality of our fleets to improve further in 2027 as natural gas-powered horsepower becomes a constraint on the industry's ability to meet completion demand, we believe we are well positioned to benefit from the changing competitive landscape. While this backdrop could present attractive investment opportunities that expand our position in the completions business over the next several years, our near-term focus remains on restoring segment returns to acceptable levels before committing capital to address the emerging undersupply.

From the past several years through this spring, pricing in our completions business declined by approximately 30%. We have since recovered roughly 1/3 of that decline, but pricing must move higher before we reconsider our investment strategy for the business.

For 2027, we expect to continue replacing anticipated diesel equipment retirements with new Emerald 100% natural gas-powered direct drive assets while keeping our overall capacity relatively steady.

Turning to Drilling Products. Third quarter results improved substantially from the second quarter. Revenue increased 21%, while we also saw significant margin expansion. The segment delivered its highest quarterly revenue and adjusted gross profit since we completed the acquisition of Ulterra in 2023.

Internationally, we continue to see growth across most markets, particularly in Latin America, where strong demand and market share gains in Argentina have driven record revenue. Total international revenue increased sequentially even as the conflict in the Middle East created challenges in one of our key markets. While the conflict may limit near-term growth in the Middle East, we continue to see strong demand in other regions.

Over the longer term, we see international markets, including the Middle East, as an important source of growth for the segment. In the U.S., revenue again grew faster than the broader industry activity trend. Customer adoption of what we believe our best-in-class drill bits continues to expand, supporting market share gains, improved pricing and stronger margins. As a result, the segment achieved another quarter of record revenue per industry rig.

Beyond drill bits, we continue to grow revenue from the new Downhole Tool product development with third quarter revenue from these offerings increasing more than 40% from the second quarter.

Downhole Tools now account for around 5% of segment revenue, and we expect revenue from this business to roughly double in '26 compared with '25. We anticipate another year of strong growth in 2027 as we are still in the early stages of penetrating several of the markets where we compete with the potential for significant growth in the years ahead.

Geothermal is also growing quickly with footage drilled using our bits quadrupling from the same quarter last year. We have a strong share of the U.S. Geothermal market and expect to see additional momentum into 2027. The market continues to develop in the U.S., and we also expect growth internationally, where we are in the early stages of market penetration. While Geothermal represents less than 5% of our revenue this year, growth should considerably outpace the overall business in 2027.

Our goal is to be the drill bit supplier of choice in every market we serve, combining differentiated technology and superior products with a focus on bringing new products to market quickly and capitalizing on our strong customer relationships. Our performance in Drilling Products gives us confidence in our ability to grow the business over time while maintaining strong cash conversion.

As we look forward toward 2027, we are encouraged by the outlook for U.S. onshore activity and the opportunities ahead for Patterson-UTI. Our customer conversations continue to point to growing demand for equipment and technology that improve efficiency, reliability and well economics. Importantly, we believe our opportunity extends beyond an increase in overall activity.

Customers are placing greater value on the capabilities of service providers and their equipment and our investments in premium assets, digital technology and automation align directly with those priorities. This should position us well to improve returns across our business while broadening our footprint with key customers and strengthening those relationships over time.

While we see opportunities to invest and expand our market position, our immediate priority is to recapture pricing and improve returns on our existing business. An improving demand environment does not change our approach to capital allocation. We need to achieve returns that we believe are adequate for our overall business before committing incremental capital to industry supply growth. And any additional investment must be supported by pricing and contract terms that justify the capital required. We will remain disciplined in evaluating those opportunities with a focus on long-term returns and free cash flow per share rather than growth for its own sake.

We're very pleased with our third quarter performance, including the strong growth in earnings and free cash flow. These results reflect the progress we are making as market conditions improve and as our investments in technology and premium equipment contribute to the business.

With continuing momentum across our operations and a disciplined approach to capital spending, we expect free cash flow to improve meaningfully in 2027. That cash generation should provide flexibility to pursue attractive strategic investments, return capital to shareholders and potentially reduce debt while preserving the strength of our balance sheet.

I'll now turn it over to Andy Smith, who will review the financial results for the quarter.

C. Smith

Thanks, Andy. Total reported revenue for the quarter was $,1.342 billion, a 9% increase compared to the second quarter. We reported net income attributable to common shareholders of $28 million or $0.07 per share. Net income included $18 million of pretax other operating income, primarily reflecting a $22 million gain on the sale of rigs and components for rigs to be used in Venezuela. Adjusted EBITDA for the quarter totaled $264 million, which is adjusted for the onetime gain on the sale of the rigs and components.

Our weighted average share count was 381 million shares during Q3, and we exited the quarter with 379 million shares outstanding. As expected, working capital trends improved during the third quarter. Even as we fund CapEx projects that improve the long-term earnings power of the company, adjusted free cash flow increased significantly from first half levels. We expect another quarter of strong free cash flow in the fourth quarter.

During the third quarter, we returned $62 million to shareholders through the repurchase of two million shares as well as a $0.10 per share dividend.

In Drilling Services, third quarter revenue was $417 million with adjusted gross profit of $149 million. In U.S. contract drilling, we recorded 9,249 operating days and averaged 101 operating rigs during the quarter. Higher adjusted gross margin compared to the second quarter was driven by a 9% improvement in the average rig count as well as higher revenue per day.

Directional Drilling also improved meaningfully on a sequential basis with higher revenue and significantly stronger margins. For the fourth quarter, we expect our Drilling Services rig count to average approximately 104 rigs and exit the quarter above that level. We expect segment adjusted gross profit of approximately $150 million.

We expect to incur reactivation costs during the quarter as we prepare additional rigs for reactivation late in the fourth quarter and in early 2027, and we anticipate additional costs as we wind down our operations in Colombia.

In Completion Services, third quarter revenue was $808 million and adjusted gross profit was $133 million. Completion pricing increased by a mid-single-digit percentage sequentially, driving higher revenue and adjusted gross profit.

Activity was lower primarily due to greater-than-expected nonproductive time related to sand availability and trucking constraints. For the fourth quarter, we expect Completion Services adjusted gross profit of approximately $140 million. We expect higher pricing compared to the third quarter.

This outlook incorporates normal seasonal factors, which we expect to be more modest this year as well as the potential for weather-related delays typical of the fourth quarter.

In Drilling Products, third quarter revenue was $110 million and adjusted gross profit was $51 million. Results significantly exceeded our expectations, driven by sequential revenue growth across the U.S., Canada and international markets.

Over the past 12 months, markets outside North America accounted for over 20% of Drilling Products revenue with the Middle East representing our largest international market. During the ongoing conflict, international revenue continued to grow, although logistics, safety and personnel challenges increased costs.

Even with these cost headwinds, Drilling Products delivered its highest quarterly revenue and adjusted gross profit since our acquisition of Ulterra in 2023. While we expect the conflict in the Middle East to have an impact on our international business in the near term, strength across the rest of the segment should partially offset the pressures in the Middle East.

Additionally, we continue to view the Middle East as a key long-term growth driver of our Drilling Products segment. For the fourth quarter, we expect Drilling Products adjusted gross profit to decline 5% to 10% compared to the third quarter, primarily reflecting lower anticipated drilling activity in the Middle East, particularly in Saudi Arabia.

Our Other revenue was $6 million for the quarter, and adjusted gross profit was $4 million. For the fourth quarter, we expect adjusted gross profit in Other to be steady compared to the third quarter. General and administrative expenses were $70 million in the third quarter. For the fourth quarter, we expect G&A expenses to be approximately $70 million. Depreciation, depletion, amortization and impairment expense was $222 million in the third quarter, and we expect it to be approximately $220 million in the fourth quarter.

During the third quarter, we invested $141 million in capital expenditures. That amount included $55 million in Drilling Services, $63 million in Completion Services, $20 million in Drilling Products and $3 million in Other and Corporate. We expect 2026 capital expenditures, net of proceeds from asset sales to be less than $600 million. We ended the third quarter with $339 million of cash on hand and no borrowings outstanding under our $500 million revolving credit facility. We have no senior note maturities until 2029. Our Board has approved a quarterly dividend of $0.10 per share payable December 15 to shareholders of record as of December 1.

I'll now turn it back to Andy Hendricks for closing remarks.

William Hendricks

Thank you, Andy. Before we conclude the prepared remarks, I want to leave you with a couple of key points.

The conflict in the Middle East appears to have increased the global call on U.S. oil and natural gas production for at least the next several years. As the conflict continues, global oil inventories are drawn down further, extending the time needed to rebuild them to levels most countries consider acceptable.

Demand for U.S. LNG is also likely to grow as customers place greater emphasis on security of supply. On Monday, the Head of the International Energy Agency said he does not expect energy markets to return to normal in 2027.

Oil futures continue to provide attractive hedging opportunities for our customers. Technology demand is rapidly reshaping U.S. Drilling and Completions, driving demand for upgraded equipment that will further differentiate our business.

In Drilling, customers need larger rigs, and we believe only a limited number of existing rigs can be economically upgraded to meet next-generation requirements. Growing international demand is also drawing rigs out of the U.S., further tightening supply. In Completion, higher diesel prices are increasing the fuel savings customers can achieve with natural gas-powered equipment, driving greater demand for these assets.

However, building more of this natural gas-powered equipment requires a substantial capital. In general, we believe many completion providers either cannot fund new equipment or need higher pricing and stronger contract terms that improve the overall industry returns.

Supply chain constraints will also limit how quickly the industry can respond. Together, these dynamics should create a very strong market for our Drilling and Completion Services businesses. We will remain focused on technologies that differentiate our company and help deliver better well results for our E&P customers, including digital and artificial intelligence systems, which should result in better returns for our investors.

Our approach to capital allocation is straightforward: invest in opportunities that strengthen long-term free cash flow and create the most value for our shareholders while maintaining our strong balance sheet. We expect free cash flow to be strong again in the fourth quarter with meaningful improvement in 2027 and beyond.

We continue to evaluate a range of capital allocation opportunities, including high-return strategic investments, additional cash returns to shareholders and debt reduction. I'd like to thank all of our employees for their dedication and look forward to building on the success we have seen this year.

We'd now like to open the line for Q&A. I'll hand it back to our host.

Operator

[Operator Instructions]

Your first question is from Scott Gruber with Citi.

分析師問答

Scott Gruber

So one of the interesting backdrops here for the domestic land rig market is just how many rigs are leaving for opportunities in South America and elsewhere. Are you seeing less competition now on incremental tenders as a result? Do you think you'll see share improvement in the U.S. land rig market in '27, given international opportunities?

William Hendricks

I think we're seeing increasing opportunities in both the U.S. and Other markets. And we're going to see competition between these markets. It's really going to boil down to where can we get the best return for the investment that we have to make to activate the rig or even ship the rig. And so we're evaluating all these opportunities that are coming across. We're looking at the economics. We continue to upgrade rigs for the U.S. market, but we're upgrading rigs with the possibility that they could work outside the U.S. market as well if we can get returns that we're happy with.

Scott Gruber

That's interesting. So you did mention the interest in potentially additional rigs in Argentina. Would that be lease rigs? Would you look to operate rigs in country? What type of scale would you need to do that? And you talked about the competition for contracts. What do you need to see in the U.S. in terms of rate and duration to keep the rigs in the U.S. versus what's on the table in Argentina and elsewhere?

William Hendricks

First, I'd say, in the markets outside the U.S., it's ongoing discussions, and we'll keep you posted as those evolve. In the U.S., what we're seeing is pricing move up on leading edge. We started out the year in the low $30,000 range. We're now in the mid-$30,000 and moving higher, but we're also seeing the contract terms improve. Over the last three years, it hasn't been just a degradation in pricing. It's been a degradation in the contract terms with a shift to risk back to drilling contractors and service providers, but we're slowly moving the risk back to the point where it needs to be. So all these things continue to evolve, and we're weighing both U.S. and the markets outside the U.S.

Scott Gruber

Is the duration in the U.S. contracts now significantly improving? Are you seeing that as well?

William Hendricks

It's something that we choose to do or we choose not to do. So as the rates continue to push higher, we will likely lock in some longer-term contracts. And if it's an opportunity that we have today where we see the rig rates still have opportunity to move higher, then we're going to lock in a shorter term until we can get the rates to where we're happy and then we'll lock in the longer term.

C. Smith

Yes, Scott, I'll add to that, that one of the things affecting that is really what the rig or if it is an upgraded rig, really what that upgrade schedule looks like and whether or not we've had to put any kind of capital into it or significant capital into it. And to the extent that we have or that we choose to do that, we generally are trying to derisk that somewhat with the customer. And I'll be honest, that's not a real difficult conversation right now because the customer wants that rig and that rig is generally one of the most capable in the industry. So to the extent that we're looking at really good pricing and a longer term, that kind of goes hand-in-hand with what we're doing in our upgrade program.

Operator

Your next question is from Jim Rollyson with Raymond James.

James Rollyson

Andy, just kind of circling back to the U.S. rig market, your 104 rigs average expectation for this quarter. You guys mentioned in the prepared remarks, expectation of that picking up again in 1Q and just your conversations with public operators, even going back to what you were mentioning at Barclays, you've got some kind of verbal commitments and things like that. I'd love to understand maybe the order of magnitude of possible rig adds from the public guys as we look through next year, just given what's happened and kind of where the rig count is today versus where it was three years ago or so.

William Hendricks

Yes. The pace of increase was really fast coming out of April. And so we've added a significant number of rigs. We went from 88 to 104. Our rig count is -- we still see it moving higher, not quite at the pace that we had coming out of April, but we still see the rig count moving higher. And we see this shift to publics. We're even increasing rig count for some publics in the fourth quarter and into early next year. And we're even in discussions and signing contracts for rig deployments towards the middle of next year. So these are firming up. Some of them are discussions, some of them are signed contracts. But it's definitely still a draw from E&Ps on needing higher-spec rigs for what they're doing.

James Rollyson

Yes. Understood. And obviously, the crude being north of 80 through next year is probably helpful to those discussions. As a follow-up, just Drilling Products had a pretty remarkable quarter. You talked about some of the drivers there. Maybe help us understand how we should think about that growth opportunity maybe with and without the Middle East normalizing next year because it certainly was a bigger step than I think anybody was generally expecting and just kind of love to hear how you guys are thinking internally about growth opportunities.

William Hendricks

Yes. I appreciate the question on Drilling Products. We don't talk enough about it. They do a fantastic job. They are able to respond quickly to customer demand, so they were able to move quickly here in the U.S. I'll say that we're pushing our capacity on manufacturing here in the U.S. We may have to look at expanding that in some of our other locations, but that's a good problem to have. So the team responded quickly. We're getting some pricing improvement. We're doing very well on market share.

And then outside the U.S., there's parts of the Middle East that are doing well. Saudi is having its own separate challenges right now, where you saw an offshore slowdown and then a little bit of land rig decrease right now. But outside of that, we do expect further growth. So really excited about how the team is managing that business and what they're doing to continue to grow that business. And take Argentina, for instance, with the plan to increase the rig count in Argentina, I expect we're going to do very well down there as well. And then Venezuela could be a future opportunity for us, too.

Operator

Your next question is from Saurabh Pant with Bank of America.

Saurabh Pant

Andy, I think you made a comment in your prepared remarks about having limited number of low-cost rig reactivations, right? If I remember that right, I think that number might be 8 to 10 rigs is what I'm thinking. But correct me if I'm wrong. The question is, do you think those are net adds to the industry? Or do you think part of that is because you are upgrading rigs and there is a lot of demand for those upgraded rigs, so you might be gaining share? And then related to that, if we are adding that many rigs into 2027, how should we think about Completions demand coming out of that? Because we know Completions lag and that market is super tight. So just help us think about completions on the back end of that rig demand.

William Hendricks

Yes. Thanks. So yes, starting with the Drilling rigs, some of the upgrades that we're doing are on existing rigs that are operating where we do some swap outs for customers during a brief pause to put those upgrades in place. But some of these rigs are net adds where rigs are going back to work. And so we do see the rig count increasing into next year. And so really pleased with how our teams are progressing, how we're doing managing costs on those upgrades and how things are going with the contract negotiations and the pricing that we're getting. As Andy mentioned earlier, we're trying to lock in the term so that we're covering the cost. We completely derisk it that way, but it gives us a lot of future upside as well, having that rig with a higher upgrade.

So with the increasing rig count to the completion story, yes, the completion demand is going to increase, but it's not clear yet where the supply is going to come from. If you look at how we're managing things, as we've said many times, our pricing went down over the last three years, almost 30%, and we need to get some recovery before it makes sense from a capital investment to actually add capacity, and we don't think we're there yet. So we've been raising pricing. We were successful raising pricing in the third quarter. I think that continues into next year. We may get to a point where it makes sense to invest in adding capacity, but we're not there yet.

Saurabh Pant

Right. No, that's all very encouraging, Andy. And then Andy, maybe this one is for you. I think Andy made the comment that you're running the business for free cash flow per share growth and returns and not growth for growth sake, which is fantastic. But as we think about capital allocation, right, you are prioritizing pricing over just activity growth, but you do have opportunities to deploy capital into these newer technologies kind of strategic opportunities. But if we think about '27 free cash and capital allocation in general, right, how should we think about any preliminary color maybe on CapEx and any of the other things that we should be mindful of from a capital allocation standpoint?

C. Smith

Yes. Again, we haven't gone completely through our budget process yet. So I'm not ready to guide to '27 CapEx. But I will say, in general, I don't know that I see a material change probably from what we're seeing this year. Again, we talked about and you started your first question with sort of how many rigs do we have left in sort of that easy to put out range. And then beyond that, it becomes, again, a little bit more expensive and pricing really needs to come up.

If you look across the whole fleet, again, I still think pricing needs to come up kind of for the fleet we have today. So I don't see us coming in with a capital program that necessarily adds a lot of supply to the industry in any of our core businesses.

I do think that as we look at the makeup of our fleet, whether it's in drilling and/or completions or in I do think that we'll continue to high-grade our equipment so that our equipment will be the best-in-class and it will be the equipment that works regardless of the point in the cycle that we're in. So that's really what our focus is. I don't know that our focus is necessarily going out there and trying to capture a lot of share. But we will continue to try to make sure that we have the best, most capable fleet in the industry in either side of our business.

Saurabh Pant

Right.

William Hendricks

Our markets are in our favor if the industry short a few rigs and short a few frac fleets.

Saurabh Pant

Right. No, definitely, Andy, like you said, right, it's not growth for growth's sake, you're balancing risk, you're balancing return. And if the equation is favorable, you deploy something strategically, but the focus is on free cash flow per share growth rate, and that's the key point. Yes.

Operator

Your next question is from Alexa Breno with Goldman Sachs.

Alexa Petrick

I wanted to ask about the Completions market. If Completion demand strengthens again in '27, how do you think about the industry response for new adds, especially just given the capital requirements for high-quality horsepower? Could we see pricing move materially higher before a meaningful supply response? Or how do you think about that setup?

William Hendricks

Yes, I'll start, and then I'll hand it over to Andy Smith. As I've said before, we need to get recovery on our pricing to where when we're adding new equipment, it actually makes sense from a return standpoint. We're just not there yet. And so we've been working with our existing customer base. We are adding new equipment in terms of high technology for customers that need that to burn natural gas with our Emerald system, but we're also retiring the older Tier 2 at the same time.

So our overall capacity is staying level for the next projected several quarters. Unless we get pricing recovery up to the point where returns are much higher than our cost of capital to add new equipment, it just doesn't make sense. And what we see in the market from some of our competitors, some of the competitors, we either have challenge justifying a capital spend to grow or they have other priorities. And so it really doesn't show much increase in capacity in the industry over the next few quarters as far as we can see. Andy?

C. Smith

Yes. I would just say that, look, I do think that frac demand will certainly be higher next year. I don't think there's a lot of capacity out there. I think our industry has had a long history of sort of helping finance our customers' growth plans using our balance sheets and not getting appropriate returns for it. And until our returns return to where they need to be, I don't think we intend to invest to grow the overall industry fleet.

Alexa Petrick

Okay. That's very helpful. And then maybe just a follow-up on the Drilling side. As you talk about some of these high-spec rigs, can you just help us understand a little bit more of what that day rate could look like and then particularly around contract duration? Is that moving longer at all? Or how are customer conversations evolving there?

William Hendricks

Sure. We have a large number of our -- what we call our APEX XK rigs that we're upgrading to one million pound load capacity for the deeper wells, longer laterals, running some slightly heavier casing strings in the deeper wells and just the amount of drill pipe that we have to rack back. So those upgrades are happening right now. We're getting very favorable response from customers. But we also have a rig design that we call the XC+ that we're going all the way to 1.3 million pounds for the deepest wells in the Haynesville and in the deep Delaware.

And for the E&Ps that are looking at those projects, we're getting extremely favorable response. I mean this is a significant upgrade, not just on structure, but on fluid capacities, on torque capacities, a number of things. So for instance, we've recently signed a three-year contract to deliver one of those rigs next year with day rates over $45,000 a day. So that's really the true leading edge of our highest upgrade spec rig.

Operator

Your next question is from Derek Podhaizer with Piper Sandler.

Derek Podhaizer

I was on mute. Can you hear me?

William Hendricks

We got you now.

Derek Podhaizer

All right. Sorry about that. Sorry about that. Just jumping between too many calls. I wanted to go back to Saurabh's line of questioning around just the capacity and your supply. Just thinking about as you move above the 104 rig count level at the end of this year, adding rigs into next year. Obviously, a big theme for the industry, how many rigs actually could get added back with a little less friction. Maybe can you tell -- is it 110 rigs, 115 rigs, 120 rigs? When does it start to get a little bit more significant from a capital standpoint to really invest in these rigs? Just trying to gauge how the industry could respond if there's a rig count pull here.

C. Smith

So look, I think Saurabh's sort of number was fairly accurate. I think we've got 8 to 10 that are relatively easy to upgrade and put out into the market economically. Beyond a bag, it's much more expensive. And again, I don't have perfect information around what our competition necessarily has. But if I listen to their public comments, I don't feel like there's a lot of excess capacity out there either.

So I think, again, pricing is going to need to improve for a significant amount of rigs to come back into the market if that's what the market is really requiring. We'll have to wait and see where we go. But I would say that from our end, we probably have, again, about 8 to 10 rigs that are kind of given where we see pricing today that are economic to put back up.

Derek Podhaizer

Got it. Okay. That's helpful. And then on completions, just given some of the efficiency issues that you guys saw as far as the South Texas sand and some of the trucking in the Permian. Just curious just the overall confidence level of the Completions industry to bounce back if we do see this demand spike that we're expecting, just given the rig count -- the rigs that have been added and the expected rigs added for next year. I mean we've heard some of your peers talk about the rebuilding costs into the system. So I'd just love to hear your thoughts around any sort of issues around efficiencies into next year if we do get a demand spike in completions.

William Hendricks

Yes. It was a real interesting situation in the third quarter on Completions where they were on track for a significant beat versus what we had out for projections. And it wasn't long after we had our big analyst dinner and we all saw each other in New York that it wasn't just us, but the entire industry was struggling to get sand deliveries out of South Texas mines for the work in South Texas. And it ended up holding up us and even others as well. So we just ended up with white space in the calendar that we didn't expect.

The team did a great job of recovering where they could. Some of the customers actually paid us some standby on some of that, which is a big shift in the market compared to previous years. So pleased with some of that. And so we came in close. But like I said, they were on track for a big beat until that happened. There were also some trucking issues relative to driver shortages in the Permian. But where we are today, here we are almost through the month of October, and we haven't seen those issues now in South Texas with either the sand, and we do seem to have enough drivers to manage our loads out in the Permian today as well.

Operator

Your next question is from Stephen Gengaro with Stifel.

Stephen Gengaro

I think two for me. The first is kind of a high-level question. When we think about a lot of your competitors and they're investing a lot of money in sort of into new areas, what advantage do you think that gives you in the business? And maybe on top of that, are there areas that are tangential to what you're doing kind of like Ulterra that you've integrated very well that you would look at as additional business opportunities?

C. Smith

Yes. I would say that, look, if you think about the capital that's kind of being diverted away from Completions into other areas, and I think that's what you're referring to. If you go back into the history of Completions, the barriers to entry going back 10, 15 years ago were not as significant as they are today. I mean, today, you've got our digital offerings, you've got our equipment, you've got our safety programs, you've got even the cost to ensure this stuff has gone up. So the cost to get into this business is not what it was. I mean this is a tough business to operate in.

So as you take one of those easy things to solve for being capital and divert it somewhere else, it just makes those of us that are in the business and have established track records, all that much more competitive. So look, I think it's great. I think anything that kind of takes my competition's capital and puts it elsewhere is great for us. So from that standpoint, I think it's a positive. And I'm sorry, your second question was around Ulterra. Could you remind me what about?

Stephen Gengaro

Just are there -- similar to Ulterra, without naming specific companies, obviously, are there specific product lines related to Drilling or Completions that would be kind of top of your list of potential targets?

C. Smith

Yes. I mean I think, look, we really kind of struck gold with Ulterra. We have a phenomenal business, a phenomenal management team. And if there are those businesses out there, we would certainly be interested in them. Certainly, anything in the Downhole Tools sort of arena. Again, we've got to be selective because those things aren't a dime a dozen. You've got to get out there and kind of do the work and find them. So I wouldn't say that there's a bunch of them running around, but we'll certainly kind of continue to effort that.

William Hendricks

Yes, Stephen, this kind of leads into a use of cash discussion. And with the projections that you guys can do towards year-end and even into next year, we'll be sitting on a significant higher amount of cash than we probably ever have historically in the company. It gives us a lot of strategic opportunities, and we've been open that we really like what we've done in the products business. Ulterra is doing a fantastic job, and we continue to look for quality products and management teams that fit within that product segment that we have. It helps to shift the profile of the company to something that's relatively low CapEx versus our Drilling rigs and Completions business.

So we'll continue to look for those opportunities. But at the end of the day, like we said, if we can't find what we think are good opportunities, we'll return that cash to shareholders.

Stephen Gengaro

And just one quick one. You may have mentioned this and I might have missed it. The balance between frac fleets and drilling rigs, I mean, obviously, that kind of led the way early. Are we at a balance point now, like where the number of rigs out in the market and the number of frac fleets are pretty much working efficiently together where there's not a shortage of one versus the other. Obviously, you're not building or depleting DUCs effectively.

William Hendricks

I would say we were at a balance a couple of months ago.

C. Smith

We're a little short on the Completion side.

William Hendricks

Yes, you can. There's certainly tension out there. We're getting phone calls, "Hey, I need something, what can you do to help me?" I mean you can certainly see the tension in the market growing in terms of E&Ps needing equipment that's becoming harder to get.

Operator

Your next question is from Eddie Kim with Barclays.

Edward Kim

So you mentioned Completions pricing has declined about 30% over the prior three years and that we've since recovered about 1/3 of that decline. As pricing momentum improves, what level of recovery do you expect we could be at this point next year? Could we recover maybe 2/3 of that decline or maybe even more? And what level of pricing recovery would be required for you to actually consider expanding your position in the completions business?

William Hendricks

Yes. I think we have the opportunity to recover all of our pricing into next year at some point and potentially even more. We'll just have to see how the supply-demand equation really kind of carries out because if you look at the market now versus even three years ago, you have a little more consolidation in the market, but then you also have some companies that are diverting their capital to do other things. So there's really the list of companies that are willing to put capital into this completions business is pretty short right now.

So that's a good setup for a company like ours to generate good return on capital when we make these type of investments. But in terms of what we can get in terms of recovery, I think we can get all of our recovery and possibly more.

C. Smith

Yes. I would also just add to that, that look, as you talk about growing the industry capacity, I mean, you have to if we're going to put capital into that and think about growing the overall industry capacity, you have to think about it in terms of more than a one-year opportunity, right? So you have to have some visibility or potentially even a different contract structure with some of your customers. So I would say that until we recover that pricing, I think talk of growing the overall industry capacity is a little bit premature.

Edward Kim

Understood. Understood. And then just in your Drilling Products business, you mentioned that the expected kind of sequential decline here in the fourth quarter is due in part to lower drilling activity in Saudi Arabia. One of your peers recently who had some of their land rigs in Saudi suspended, they suggested that part of the reason for that is because of insufficient frac capacity in the Jafurah unconventional basin there.

So first, is that what you're hearing as well as to the reason for the Drilling-related slowdown? And secondly, I mean, does that present an opportunity for you to perhaps send a few fleets over to Saudi Arabia?

William Hendricks

I don't think it's our place to speak to the frac capacity in Saudi Arabia. We're not participating in that. And I think there are sufficient companies over there to do frac in Saudi Arabia, and they don't need another company to come in. So we'll stay focused on what we're doing in the U.S., and we don't have excess capacity in the U.S. to ship out.

Operator

Your next question is from Josh Silverstein with UBS.

Joshua Silverstein

I was just curious how you're thinking about your contract duration. Given the tightness in the market out there right now, are you trying to put more on longer-term duration, maybe not getting peak pricing? Or do you want to keep seeing price go higher before you lock in some of that longer-term contract duration?

William Hendricks

There's kind of a mix to that answer. So for instance, I mentioned earlier that we've signed a three-year contract for a very large upgrade. And so we're derisking the cost of the upgrade within that three-year contract. And so when we'll look at those types of scenarios, but there are some scenarios on just rigs that we're operating today, if we think we've got the opportunity for the rig rates to go up higher later this year or early next year, we're not ready to lock it in for a longer term yet.

So we weigh all these scenarios the way that you might manage a bond portfolio as well. We'll lock in when we think it's the right level.

Joshua Silverstein

And then maybe...

C. Smith

I don't have anything to add to that other than, yes, I mean, look, we've talked a lot about where pricing needs to go. And until it gets there, I think that depending upon which asset particularly we're talking about, we probably would defer too long of a lock. But again, if it's a brand new -- if it's a new asset coming out of the yard that we put a lot of money into, we might lock that up for a little bit longer.

Joshua Silverstein

Got you. Maybe along the same lines, we tend to think of the public E&Ps and larger privates is more kind of that duration in terms of what they want with contracts and private a little bit more short-term in nature. Just given how tight things are, are you seeing the smaller private guys willing to go and lock equipment up a bit longer? It feels like pricing -- if crude oil prices or gas prices come off, they're more likely to go and drop. But have things changed just because of how tight the markets have been?

William Hendricks

I will qualify the small privates that we might work for are typically privates that have multiyear programs. So they may only operate two or three rigs, but they're looking at long-term multiyear programs. Some of them are family operations. And that's how we look at those we don't do a lot of work necessarily for the private equity-backed privates that are trying to drill a few wells, bring some production online and then flip the property. So we tend to work for the ones that have the longer duration. So yes, therefore, some of the smaller E&Ps that we might work for are willing to lock in longer-term contracts because they have long-term plans.

Operator

Your next question is from Dan Kutz with Morgan Stanley.

Daniel Kutz

So maybe just go back to -- I think it was Eddie's question, but broadening it out to the whole Middle East. Any appetite or any conversations or considerations of sending actual assets over there, either in the Drilling or Completion Services side of the business? Obviously, you have the Turnwell JV and close relationship with ADNOC. They're ramping their unconventional plans and activity there. But yes, just any appetite or any conversations to send equipment outside of the drill bits business for Middle East unconventional plays?

William Hendricks

It's a good question, and I'll help kind of break it down because it really depends on the country and the market. I would say that in some of the more mature markets, like Kuwait, Saudi Arabia, even Oman, you've got sufficient Drilling contractor capacity in those countries, and you've got Saudi actually slowing rig count right now. So there's no reason for a new Drilling contractor to go put rigs into the country. The one thing that's been interesting about our joint venture with Turnwell, which has been in for a couple of years, we had a significant number of people on the ground helping to improve efficiencies, drilling shales and unconventional wells, both in oil and gas.

I think it gives us a bit of an advantage if they're looking at bringing rigs from outside of the country. But as you know, their primary drilling contractor is ADNOC drilling in the country. But if they were to look outside, I think we would have an advantage, but we just have to wait and see how all that plays out with both ADNOC, the E&P, but also with any of the international companies that are getting concessions over there.

Daniel Kutz

Got it. That makes sense. And so I guess there's been a lot of talk about some of the logistics bottlenecks that were headwinds in the third quarter on the completion side of the business. But I guess to come at that question from a different angle, it sounds like a lot of the bottlenecks are markets where Patterson has content like proppant logistics, like natural gas logistics and power is obviously in very high demand in the oil field and in other markets. But just wanted to kind of check broadly on any trends you're seeing pricing demand, anything to flag on the ancillary Completion Services businesses?

William Hendricks

Yes. So you bring up a really good point because when we do completion work for most customers, it is an integrated package that includes our hydraulic fracturing, our wireline, our digital services, our trucking for sand, which we have -- on any given day, we may be running 1,000 trucks for sand. Then on delivering compressed natural gas, it could be over 150 trucks on any given day that we have moving.

So we have all these things in place. Specific to South Texas, what we ran into was just the actual mines were struggling to keep up and actually produce the sand right at the mine. And so it wasn't a logistics issue. It was really just getting trucks loaded to get to location. But so far this month, everything looks like it's back on track with the mines, and we have sand moving in South Texas. And as I mentioned earlier, we have drivers in Permian. It looks like it's sufficient capacity right now.

Operator

Your next question is from Keith MacKey with RBC Capital Markets.

Keith MacKey

Maybe if we could just stick with the frac pricing discussion. Just curious how much of the pricing increases you've seen to date are like-for-like type equipment pricing based on supply-demand tightness versus how much of the pricing improvement has been driven by upgrading to increased natural gas substitution? And how much of that gas substitution are you able to work into your pricing strategy overall to make sure you get improving returns on your overall asset base?

William Hendricks

Let me back into that question a little bit. So certainly, as we increase the amount of Emerald 100% natural gas, pumps that we have in the field, that will come through as a pricing increase because we get to charge more for that technology because there is a big benefit when we can use more natural gas as a fuel versus diesel, it's a huge benefit for the E&P. But all that being said, we are getting -- the majority of the single -- what we said was mid-single-digit price increases in the quarter, majority of that was like-for-like price increases even to the point where we've actually walked away from some agreements when they were finished and moving on to other agreements where we get higher pricing.

I think you'll see more of that with some of the other companies, too, as E&Ps continue to do their price checks on the market and try to learn where the market is. I think you'll see some movement of Completion equipment to higher pricing opportunities. But yes, the majority of that mid-single-digit increase change in it was like-for-like pricing increase.

Operator

Your next question is from Arun Jayaram with JPMorgan.

Arun Jayaram

One of the E&Ps yesterday had an interesting comment on what they're doing in Completions. Expand Energy, as you know, Andy, largest U.S. natural gas player mentioned as a result of higher diesel costs, they burn around 25 million gallons a year that they're switching to kind of natural gas burning equipment or going to try. I think they're running like five or six fleets I mentioned. And I was wondering if you could talk a little bit about, are you seeing that same trend across the industry? And is that maybe supporting some of the differentiated pricing gains that you've been able to deliver just given your high mix of natural gas burning equipment?

C. Smith

Arun, the differential between being able to burn natural gas and diesel is probably at an all-time high. I'm going back and checked, but it's tens and tens of millions of dollars per fleet per year. So if you have the ability to get natural gas equipment, which is pretty sold out across the industry right now. But if you have the ability to get that and you have the availability of gas, you would absolutely choose that route. I can't speak specifically to what Expand is doing.

Arun Jayaram

Yeah. I was just wanting to get your take. But I guess...

C. Smith

Yes, generally, anyone in the industry would be doing that right now.

Arun Jayaram

Yes. But that could create the backdrop where if an XYZ customer wanted a fleet that they could bid up and that's how you can manifest pricing gains in a faster -- in a clip, yes. That was kind of what I was kind of trying to get more color on.

William Hendricks

Yes. And we continue to bring in the Emerald 100% natural gas direct drive pump systems in good numbers every quarter, and we have slots with the manufacturer all the way through next year. Again, it's not that we're not increasing overall capacity of frac supply for what we offer in the market because we're retiring the older Tier 2 diesel stuff. but we do get a higher rate for when we put those on location because of the benefit of burning more natural gas and less diesel when we do that. So we blend those into existing fleets that are out there and increase the amount of natural gas that we're burning on a per fleet basis.

Arun Jayaram

Great. And just my follow-up. If we take out some of the noise in late in the quarter in 3Q, your results in North America are definitely trending better than a lot of your completion peers. Andy, I was wondering if you could highlight what do you think is driving that, call it, differential pricing commentary and whatnot. We have a couple of theories, but I want to get your views on what's maybe driving it because a lot of your peers are not citing the strength in completions that you are.

William Hendricks

Yes, it's great execution and great product and all backed with the digital infrastructure that we put in place, and that's what's keeping us highly competitive out there. As I mentioned earlier, if it hadn't been for sand mines in South Texas, we would have had a really strong beat in Completions in the third quarter, we're on track for. The team is doing a great job.

Arun Jayaram

Got it. And then, Andy, to what extent have you been able to high grade the quality of your customer base? I know all customers are important, but there's obviously -- you want to be aligned with E&Ps that have sufficient scale so you can get the most drilling and D&C efficiencies from that and give you more utilization on your horsepower.

William Hendricks

Yes. We don't have any issue with the quality of our customers. I would explain it this way and say 60% to 70% of our completion revenue comes from the biggest 15 E&Ps in the U.S.

Operator

There are no further questions at this time. I will now turn the call back to Andy Hendricks for closing remarks.

William Hendricks

Thanks to everybody who dialed in today. It was really exciting to be able to talk about the third quarter. It's one of the best quarters we've had in a long time. I want to congratulate our teams across all of our segments at Patterson-UTI Energy for a great quarter and look forward to talking to you again at the next earnings call. Thanks a lot.

Operator

This concludes today's call. Thank you so much for attending. You may now disconnect.

本文部分內容由 AI 生成和翻譯,並經人工審核,僅供參考且做為一般資訊用途,不構成投資建議。

免責聲明:本網站提供的資訊僅供教育和參考之用,不應視為財務或投資建議。

推薦文章

tradingkey.logo
風險提示:我們的網站和行動應用程式僅提供關於某些投資產品的一般資訊。Finsights 不提供財務建議或對任何投資產品的推薦,且提供此類資訊不應被解釋為 Finsights 提供財務建議或推薦。
投資產品存在重大投資風險,包括可能損失投資的本金,且可能並不適合所有人。投資產品的過去表現並不代表其未來表現。
Finsights 可能允許第三方廣告商或關聯公司在我們的網站或行動應用程式的任何部分放置或投放廣告,並可能根據您與廣告的互動情況獲得報酬。
© 版權所有: FINSIGHTS MEDIA PTE. LTD. 版權所有