Cuộc họp công bố kết quả kinh doanh Q3 2026 của Xometry (XMTR): Doanh thu kỷ lục, lợi nhuận GAAP đầu tiên và nâng dự báo kinh doanh

Thông tin trọng tâm

• Xometry (NASDAQ: XMTR) báo cáo doanh thu kỷ lục trong quý 3/2026 đạt 252 triệu USD, tăng 40% so với cùng kỳ năm ngoái, đưa tốc độ doanh thu hàng năm vượt 1 tỷ USD.
• Doanh thu từ sàn giao dịch tăng 43% lên 238 triệu USD. Số lượng người mua đang hoạt động tăng 20% lên 93.812, trong khi doanh thu sàn giao dịch trên mỗi người mua hoạt động tăng 19% nhờ thị phần ví cao hơn.
• Biên lợi nhuận gộp của sàn giao dịch đạt mức kỷ lục 36,0%, tăng 130 điểm cơ bản so với quý trước. EBITDA điều chỉnh tăng lên mức kỷ lục 21,4 triệu USD, tương ứng với biên lợi nhuận 8,5%.
• Xometry ghi nhận quý đầu tiên có lãi theo chuẩn GAAP, với lợi nhuận thuần đạt 1,9 triệu USD so với khoản lỗ 11,6 triệu USD trong quý 3/2025.
• Ban lãnh đạo đã nâng triển vọng năm 2026 với mức tăng trưởng doanh thu khoảng 37% và EBITDA điều chỉnh từ 68 triệu USD đến 68,5 triệu USD.
• Việc tích hợp Siemens Design Center vẫn được lên kế hoạch ra mắt bản beta vào quý 1/2027, tiếp theo là triển khai dần dần tới khách hàng trong năm.

Dữ liệu tài chính chính

Kết quả Kinh doanh và Hoạt động

Mức tăng trưởng của sàn giao dịch diễn ra trên diện rộng ở các nhóm khách hàng, ngành dọc và sản phẩm. Xometry cho biết chiến lược lấy sản phẩm làm trung tâm, tối ưu hóa mô hình AI và cá nhân hóa tiếp thị đã góp phần làm tăng tỷ lệ chuyển đổi, bổ sung thêm người mua và tăng thị phần ví.

Chi phí quảng cáo cho sàn giao dịch đã giảm xuống mức thấp kỷ lục là 3,0% doanh thu sàn giao dịch, giảm 200 điểm cơ bản so với cùng kỳ năm ngoái. Ban lãnh đạo cho biết sự cải thiện này nhờ lượng truy cập trực tiếp mạnh mẽ hơn, triển khai truyền thông trả phí hiệu quả hơn và tối ưu hóa dựa trên AI.

Sự đón nhận từ các doanh nghiệp lớn tiếp tục là động lực tăng trưởng chính. Doanh thu từ các khách hàng lớn nhất của Xometry đã tăng hơn 40%, trong khi các tài khoản chi tiêu ít nhất 500.000 USD cũng tạo ra mức tăng trưởng doanh thu trên 40%. Công ty đã kết thúc năm 2025 với bốn khách hàng chi tiêu ít nhất 10 triệu USD hàng năm và kỳ vọng con số này sẽ tăng trong năm 2026.

Xometry đã mở rộng tích hợp TradeCentric để bao gồm tự động hóa đơn đặt hàng và hóa đơn trên hơn 220 hệ thống thu mua điện tử, bao gồm Coupa, SAP Ariba và Microsoft Dynamics. Ban lãnh đạo cho biết việc tích hợp quy trình làm việc sâu hơn đang cải thiện tính minh bạch trong chi tiêu và hỗ trợ tăng thị phần ví.

Công ty đã chuyển hầu hết lượng truy cập của người mua sang nền tảng thương mại điện tử tích hợp AI gốc mới. Các cập nhật trong quý 3 bao gồm đặt hàng lại bằng một cú nhấp chuột, thông tin ngày giao hàng đơn giản hóa và bổ sung hơn 100 vật liệu tùy chỉnh trong công cụ báo giá tức thì. Xometry cũng đã ra mắt trải nghiệm Workcenter được thiết kế lại cho tất cả nhà cung cấp tại Mỹ.

Số lượng nhà cung cấp hoạt động duy trì ở mức trên 5.000 trên toàn cầu. Ban lãnh đạo nhấn mạnh khả năng của sàn giao dịch trong việc kết nối nhu cầu với công suất sản xuất chưa sử dụng, đồng thời duy trì mô hình hoạt động nhẹ về tài sản.

Dự báo của Ban lãnh đạo

Trong quý 4/2026, ban lãnh đạo dự kiến:

• Doanh thu đạt từ 254 triệu USD đến 256 triệu USD, tương ứng mức tăng trưởng từ 32% đến 33% so với cùng kỳ năm ngoái.
• Mức tăng trưởng doanh thu sàn giao dịch đạt khoảng 35% đến 36%.
• Doanh thu dịch vụ đi ngang hoặc tăng nhẹ so với cùng kỳ năm ngoái.
• EBITDA điều chỉnh đạt từ 22 triệu USD đến 22,5 triệu USD, so với 8,4 triệu USD trong quý 4/2025.

Đối với cả năm 2026, Xometry đã nâng triển vọng của mình:

• Tăng trưởng doanh thu hiện dự kiến đạt khoảng 37%, tăng so với khoảng 33% đến 34% trước đó.
• Doanh thu sàn giao dịch dự kiến tăng khoảng 41%.
• EBITDA điều chỉnh dự kiến đạt từ 68 triệu USD đến 68,5 triệu USD, cao hơn khoảng 7 triệu USD so với dự báo trước đó.
• Biên EBITDA điều chỉnh bổ sung cả năm dự kiến đạt khoảng 20%.

Về lâu dài, ban lãnh đạo tiếp tục mục tiêu biên lợi nhuận gộp sàn giao dịch trong khoảng từ 35% đến 40% và biên EBITDA điều chỉnh bổ sung ít nhất 20% vượt mức tốc độ doanh thu hàng năm 1 tỷ USD.

Rủi ro và Các điểm cần theo dõi

Việc tích hợp Siemens dự kiến bắt đầu với bản beta vào quý 1/2027, nhưng ban lãnh đạo cho biết việc triển khai sau đó trên các phiên bản Design Center và khách hàng sẽ diễn ra dần dần. Công ty kỳ vọng mối quan hệ hợp tác này sẽ đóng góp tích cực vào kết quả hoạt động năm 2027, mặc dù dự báo chi tiết cho năm 2027 sẽ chỉ được cung cấp trong cuộc họp công bố kết quả kinh doanh quý 4.

EBITDA điều chỉnh thị trường quốc tế đã hưởng lợi từ một số lợi thế chi phí một lần trong quý 3. Ban lãnh đạo cho biết hiệu ứng này sẽ tự cân bằng trong quý 4, khiến dòng lợi nhuận quốc tế chuyển tiếp của quý đạt mức mạnh mẽ bất thường.

Doanh thu dịch vụ chỉ tăng khoảng 2% trong quý 3 và dự kiến sẽ đi ngang đến tăng nhẹ trong quý 4. Xometry đang nỗ lực cải thiện mức độ tương tác và khả năng kiếm tiền thông qua Thomas, bao gồm quy trình tiếp thị hỗ trợ bởi AI và các sản phẩm thương mại điện tử bổ sung.

Ban lãnh đạo cũng nhấn mạnh rằng việc phân bổ vốn sẽ cân bằng giữa đầu tư tự thân, đòn bẩy hoạt động và các thương vụ thâu tóm nhỏ bổ sung một cách có chọn lọc, đồng thời duy trì tính linh hoạt của bảng cân đối kế toán.

Điểm nhấn phần Hỏi & Đáp với Chuyên viên phân tích

Hợp tác với Siemens: Ban lãnh đạo cho biết các đội ngũ tích hợp đang làm việc trên khắp các sản phẩm, khu vực và bộ phận. Việc ra mắt bản beta được lên kế hoạch vào quý 1/2027, với các đợt ra mắt chính thức cho các phiên bản Siemens Design Center khác nhau dự kiến diễn ra trong suốt cả năm. Ban lãnh đạo cũng cho biết người mua đến từ Siemens sẽ mang lại biên lợi nhuận bổ sung cao hơn vì Xometry không phải chịu chi phí thu hút khách hàng tương tự.

Mở rộng quy mô doanh nghiệp: Xometry giải thích chi tiêu cao hơn từ các doanh nghiệp là nhờ các chương trình sản xuất nhiều năm, việc áp dụng Teamspace, tích hợp mua sắm và năng lực bán hàng mạnh mẽ hơn. Ban lãnh đạo cho biết việc tích hợp sâu hơn giúp công ty trở thành đối tác cung ứng chiến lược hơn và cải thiện khả năng dự báo doanh thu.

Tăng trưởng người mua: Mức tăng kỷ lục về số lượng người mua phản ánh việc thu hút tài khoản mới và mức độ thâm nhập sâu hơn trong các doanh nghiệp hiện có. Ban lãnh đạo cho biết việc cải thiện cá nhân hóa, nhận diện thương hiệu, lượng truy cập trực tiếp và hiệu quả truyền thông trả phí là những động lực chính.

Nền tảng tích hợp AI gốc: Kiến trúc được xây dựng lại, tập trung vào API nhằm mục đích đẩy nhanh các đợt phát hành sản phẩm và hỗ trợ quy trình làm việc dựa trên đại lý AI. Ban lãnh đạo cho biết các đại lý AI hiện đã có thể tương tác với trang web để lấy thông tin về các danh mục, lựa chọn và năng lực sản xuất.

Phân bổ vốn: Xometry có kế hoạch ưu tiên đầu tư tự thân có kỷ luật vào sự tăng trưởng lấy sản phẩm làm trung tâm. Ban lãnh đạo cũng có thể xem xét các thương vụ thâu tóm có mục tiêu nhằm mở rộng công nghệ, nhân tài, sản phẩm dịch vụ hoặc phạm vi địa lý.

Hoạt động quốc tế: Ban lãnh đạo cho biết các thị trường quốc tế có trường hợp sử dụng và hiệu quả kinh tế trên mỗi đơn vị tương tự như hoạt động kinh doanh tại Mỹ. Công ty dự định áp dụng chiến lược tăng trưởng lấy sản phẩm làm trung tâm và tiếp cận doanh nghiệp của Mỹ ra thị trường quốc tế trong khi tiếp tục đầu tư vào việc mở rộng.

Toàn văn Biên bản Cuộc họp Kết quả Kinh doanh

Toàn văn cuộc gọi công bố kết quả kinh doanh

Phần trình bày của ban lãnh đạo

Operator

Good day, and thank you for standing by. Welcome to Xometry's Third Quarter 2026 Conference Call. [Operator Instructions] Please be advised that today's conference call is being recorded. I would now like to hand the conference over to your first speaker today, Shawn Milne.

Shawn Milne

Good morning, and thank you for joining us on Xometry's Q3 2026 Earnings Call. Joining me are Sanjeev Sahni, our Chief Executive Officer; and James Miln, our Chief Financial Officer. During today's call, we will review our financial results for the third quarter 2026 and discuss our guidance for the fourth quarter and full year 2026. During today's call, we will make forward-looking statements, including statements related to the expected performance of our business, future financial results, strategy, long-term growth and overall future prospects. Such statements may be identified by terms such as believe, expect, intend and may. These statements are subject to risks and uncertainties, which could cause them to differ materially from actual results.

Information concerning those risks is available in our earnings press release distributed before the market opened today and in our filings with the U.S. Securities and Exchange Commission, including our Form 10-Q for the quarter ended September 30, 2026. We caution you to not place undue reliance on forward-looking statements and undertake no duty or obligation to update any forward-looking statements as a result of new information, future events or changes in our expectations. We'd also like to point out that on today's call, we will report GAAP and non-GAAP results. We use these non-GAAP financial measures internally for financial and operating decision-making purposes and as a means to evaluate period-to-period comparisons. Non-GAAP financial measures are presented in addition to and not as a substitute or superior to measures of financial performance prepared in accordance with U.S. GAAP.

To see the reconciliation of these non-GAAP measures, please refer to our earnings press release distributed today and our investor presentation, both of which are available on the Investors section of our website at investors.xometry.com. A replay of today's call will also be posted on our website. With that, I'd like to turn the call over to Sanjeev.

Sanjeev Sahni

Thanks, Shawn. Good morning, and thank you for joining our Q3 earnings call. Our continued robust growth and stellar Q3 results demonstrate the expanding strength of our AI native marketplace. Q3 was a record quarter for Xometry across many fronts, including revenue, gross profit, marketplace gross margin and adjusted EBITDA. Q3 also marks several major milestones, a $1 billion-plus revenue run rate, our highest ever marketplace gross margin and our first quarter of GAAP profitability. Q3 revenue increased 40% year-over-year to a record $252 million, our second consecutive quarter of at least 40% growth. Marketplace revenue increased 43%, driven by broad-based strength across many verticals and increasing buyer adoption.

We drove strong structural enterprise growth as we expanded wallet share with large existing accounts. Our proprietary AI models are effectively optimizing conversion, buyer growth and market share gains. The strength we saw in Q3 has continued in Q4. We are off to a strong start in the quarter and are once again raising our outlook for the year. We expect strong compounding growth and operating leverage to continue for years to come. I will start by reiterating the fundamental thesis of our long-term growth. We have penetrated less than 1% of our massive $275 billion custom manufacturing TAM. This is a market that remains largely off-line today, still run on e-mail quotes and multi-day turnarounds. The majority of it is still sourced within 30- to 50-mile radius of the factory floor. To me, the gap is the opportunity.

We are in the opening innings of a digital transformation and our ability to capture the massive untapped opportunity gives us strong confidence in our long-term growth trajectory. Our marketplace is well positioned to capture this demand. The 3 consecutive quarters of 40-plus percent growth in our marketplace are direct evidence that the product-led strategy put in place last year is working. We are defining the e-commerce playbook in custom manufacturing and raising the experience bar for buyers and suppliers everywhere.

I will now spend a few minutes providing updates to our key focus areas. First, I will talk about establishing Xometry as the digital infrastructure for custom manufacturing. Our confidence in driving the next S-curve of our growth stems from our ability to apply our core AI models to a decade plus of proprietary data. The intelligence we derive from our data gives our customers the confidence in manufacturability of their part, the instant pricing options we present and Xometry's ability to source the part optimally. The depth of our data and intelligence is unrivaled in custom manufacturing. That same intelligence is now extending beyond our marketplace, embedding natively into partnership environments like Siemens Design Center, proof that intelligence itself, not just the marketplace around it, is the infrastructure other platforms want to build on.

More broadly, we see this as Xometry becoming the connective layer between design intent and actual physical production. Siemens is the first but not the only place we expect to integrate our intelligence. Deep technical integration is a critical pillar of our product-led growth strategy, establishing seamless AI native digital threads that remove friction from the custom manufacturing workflows will be an ongoing focus. We are making excellent progress on the Siemens collaboration, working as integrated teams across multiple products, regions and departments. We are building native integrations to Siemens Design Center, bringing Xometry's manufacturability and pricing insight directly into the platform. We expect the beta launch in Q1 2027, followed by a gradual ramp of customers to the various versions of Design Center throughout the year.

In addition to the work within design center, there's also active collaboration between Siemens Supply Frame and Thomas, extending the value both teams can bring to their customers. We will share more as we hit milestones, and we expect Siemens partnership to positively impact our 2027 operating results. Our second focus area is improving our AI native marketplace experiences. Our customer and supplier online journeys are rapidly defining the e-commerce playbook in custom manufacturing. As I have shared before, one of our core beliefs is that the B2B buying experience should be every bit as good as what people experience in their personal lives. The days of clunky B2B software, multistep checkout processes and waiting days for an e-mail quote are simply over.

What we are seeing is a generational shift in who is making manufacturing purchasing decisions. The engineers, procurement buyers and supply chain lead roles are now full of dynamic digitally native individuals. They expect the same frictionless experience at work that they have in their personal lives. When they find that Xometry can deliver, they become Xometry champions inside their organizations. On our Q2 call, we discussed enhancing our AI model capabilities in costing, sourcing and process recommendations, a new generation of high-capacity interconnected models that span the entire manufacturing journey. We are training these models on much larger data sets and retraining them more frequently. So every quote, order and supplier outcome sharpens the outcomes for the next one. Hence, the smarter the platform gets, the faster we turn complex engineering inputs into comprehensive manufacturing and supply chain decisions.

In Q3, we put that foundation to work. You can see the results in our financials. Q3 marketplace gross margin was a record 36.0%, up 130 basis points from Q2. In Q3, we made further marketplace enhancements to reduce friction and improve buyer experience. We moved the majority of our buyer traffic onto our new e-commerce platform, which is faster, increasingly mobile optimized and rebuilt from the ground up to be AI native. We are seeing that the platform is attracting more and more digitally native engineers. The new architecture is changing how fast we can launch product updates. We now deliver core buyer workflows at a fraction of the time that they would have taken a year ago. In Q3, these included a redesigned buyer dashboard with one-click reordering to drive conversion and repeat orders and a shift to arise buy dates in place of lead and transit times to simplify supply chain decisions.

Additionally, we added more than 100 custom materials to our instant quoting engine to expand marketplace selection. For our suppliers, in Q3, we launched the next generation of Work Center experience. The new homepage brings together job discovery, performance scores and payout visibility, and it is now live for all U.S. suppliers. The enhanced job board adds filters and on-screen 3D viewer and drawing review. Since launch, suppliers are accepting work faster and more jobs are matched to the right partner on the first offer. Suppliers can now find and win work that fits their capabilities more easily. I will now share advances we made in our third focus area, expanding our buyer and supplier networks. Our focus is on becoming the most expansive custom manufacturing e-commerce platform for our buyers and suppliers.

We delivered strong active buyer growth during the quarter with active buyers increasing 20% year-over-year to over 93,000. Our marketing teams have strengthened our martech and personalization capabilities, helping drive a record number of net buyer adds. Their efforts, combined with our AI model optimizations are driving conversion rate improvements and continued robust buyer growth with improving marketplace unit economics. There are still millions of potential buyers to convert. Our partnership with Siemens and our other initiatives to become the infrastructure layer in custom manufacturing will further add momentum to these trends. We are ever more focused on expanding our global supplier network and improving our supplier experience. Our global network of over 5,000 active suppliers across the world remains a significant strategic advantage, giving buyers unmatched speed, capacity and resilience.

In Q3, we expanded certified capacity and ITAR sponsorships, strengthening U.S. manufacturing by helping suppliers win higher-value work. Additionally, in our domestic supplier network, suppliers are benefiting from Xometry's rapidly growing demand, enabling them to acquire new machines and create net new capacity. Our 2027 manufacturing outlook highlights that smaller manufacturers offer a key advantage as 44% of businesses under $50 million operate below 70% capacity compared with just 16% of manufacturers above $100 million. As an asset-light marketplace, we are laser-focused on applying our AI investments, connecting these suppliers to demand at scale.

Let me share an example of success one such supplier has found on our platform, a U.S. machine shop that joined the Xometry network in Q1 of 2025. In its first full quarter, they did about $140,000 of work, ramping rapidly to nearly sevenfold to $1 million in Q3 of 2025. As they grew with Xometry, they added ITAR and ISO certifications, opening up new job demand from aerospace, defense and medical device industries. Over the last 12 months, they earned over $2.3 million through Xometry, enabling investments in new CNC machining centers, late and laser engraving capability. This is the flywheel in action. Xometry brings increasing job flow, partners invest in capacity and capabilities, and we deliver against customer demand.

Our fourth focus area is deepening enterprise engagement. We continue to deliver robust enterprise growth. Our Q3 revenue from our largest customers increased by over 40%. At the top of our enterprise funnel, we delivered accelerating 26% year-over-year growth in the number of accounts with greater than $50,000 marketplace spend. In Q3, we expanded our partnership with Trade Centric to add purchase order automation and invoice automation to our punch out connection with customers' e-procurement systems. The integration works with more than 220 e-procurement solutions, including Coupa, SAP Ariba and Microsoft Dynamics and is available now to U.S. customers. Invoice to PO matching is now automatic before an electronic invoice is sent, which removes several manual steps between an order and payment.

As Xometry becomes more embedded in our customers' workflows, we are seeing continued wallet share gains and more predictable spend. We ended 2025 with 4 accounts spending at least $10 million annually. We expect more accounts to cross that threshold in 2026. This is driven by multiyear production programs across key end markets. For example, this deeper integration is exactly what we saw with a major defense prime facing demanding program time lines. The customer initially projected a 6-month manufacturing and assembly lead time. However, by leveraging 15 suppliers in our network and our rapid DFM capabilities, the customer was able to shrink design to delivery by a full 3 months.

Our marketplace has produced hundreds of components for this program, including complex finishing and hardware installation, reinforcing our position as a trusted end-to-end partner for high-stakes defense applications. Over our 3-year partnership, this proven capability to deliver supply chain resilience and speed has fueled continuous land and expand growth, scaling the account well past that $10 million per year enterprise marker. The final focus area I will share is leveraging services opportunities. Our services offerings under Thomas helps us engage with suppliers who aren't yet in the marketplace ecosystem. Thomas has built the largest industrial manufacturing-focused digital sourcing network in North America, providing buyers access to over 500,000 suppliers. We are focused on improving our monetization on the Thomas platform and leveraging the vast network to supplement Xometry's supplier capacity.

We made strong progress on our Commerce platform in Q3. We are building on this momentum and recently enabled faster marketing services execution by integrating specialized AI workflows into Thomas Marketing Services. Additionally, we will soon launch our first collaboration with Supply Train and Thomas, driving incremental high-quality buyer traffic to Thomas. We will build upon this launch momentum to enhance our services business with additional e-commerce offerings.

In conclusion, our momentum remains strong in Q4. We are raising our 2026 revenue growth outlook given robust demand on our marketplace and the strong execution of our teams. We expect strong compounding growth to continue in 2027 and coming years, driven by our initiatives as we rapidly scale beyond $1 billion. I'm very excited about the road ahead. And before I hand it over, I want to thank our entire team. The $1 billion-plus run rate milestone we are reporting today is the outcome of a lot of hard work across all our teams worldwide. I'm proud of the pace at which teams continue to execute our product-led growth strategy. I will now turn the call over to James for a more detailed review of Q3 financials and our business outlook.

James Miln

Thanks, Sanjeev, and good morning, everyone. Our record-setting Q3 performance demonstrates the compounding growth and operational efficiency of our marketplace, delivering both strong revenue expansion and margin improvement. Top line performance was fueled by widespread adoption of our platform as we steadily gained market share. This robust growth was accompanied by further expansion in adjusted EBITDA margins as well as our inaugural quarter of positive GAAP net income. These results highlight how Xometry is establishing itself as vital digital infrastructure within a historically offline and fragmented sector.

Building on these outstanding Q3 results and positive Q4 momentum, we are lifting our full year revenue and adjusted EBITDA guidance. Q3 revenue grew 40% year-over-year to $252 million. Q3 marketplace revenue was $238 million and services revenue was $14.4 million. Q3 Marketplace revenue grew 43% year-over-year, absorbing a 500 basis point tougher comparison relative to Q2 to deliver sustained strong growth. Q3 active buyers increased 20% year-over-year to 93,812 with a record net addition of 4,255 active buyers. These record net additions were driven by our product-led growth strategy, AI model optimization and efficient marketing, including personalized pricing initiatives.

Q3 marketplace revenue per active buyer increased a robust 19% year-over-year, primarily due to increasing wallet share. We view accounts with at least $50,000 spend at the top of the enterprise funnel. In Q3, the number of accounts with last 12-month spend of at least $50,000 on our platform increased 26% year-over-year to 2,172 with 133 quarterly net adds. Enterprise investments continue to show strong returns with accounts with at least $500,000 spend, again growing revenue over 40% year-over-year. Our enterprise strategy focuses on our largest accounts, each of which we believe have $10 million plus in potential annual account revenue.

Services revenue grew approximately 2% year-over-year with a gross margin of approximately 90%. We are focused on improving engagement and monetization on the platform, which remains a leader in industrial sourcing, supplier selection and digital marketing solutions. Q3 gross profit was $98.7 million, an increase of 37% year-over-year, driven by a robust 44% year-over-year growth in marketplace gross profit. Q3 marketplace gross margin was a record 36.0%, up 130 basis points quarter-over-quarter. We are focused on driving marketplace gross profit dollar growth through the combination of top line growth and gross margin expansion. Our AI models are effectively optimizing conversion, buyer growth and market share gains. In Q3, this led to record active buyer net adds, record marketplace gross margins and increased leverage on marketplace advertising spend.

We continue to expect marketplace gross margins to be higher in the second half of the year than the first half of the year. Over the long term, we expect to expand further into our target range of 35% to 40%. Our commitment to strong discipline and rigor in capital and resource allocation across all teams while continuing to invest in growth initiatives is reflected in our Q3 operating costs. Total non-GAAP operating expenses for the third quarter were $77.4 million, a 17% increase year-over-year, which is less than half the growth rate of our revenue. Q3 operating costs as a percentage of revenue improved 590 basis points year-over-year.

In Q3, this was driven primarily by G&A and sales and marketing, which decreased 250 basis points and 330 basis points year-over-year, respectively. This reflects improving enterprise sales execution, efficiency of AI models as well as strengthened martech and personalization capabilities. Marketplace advertising spend was a record low, 3.0% of marketplace revenue, down 200 basis points year-over-year, reflecting our optimization efforts, driving improved marketplace unit economics. We continue to invest behind our product-led growth strategy and our focus on driving increased automation with AI across operations and support.

In Q3, Xometry reported its first quarter of GAAP net income, $1.9 million compared to a GAAP loss of $11.6 million in Q3 2025, driven by our improving operational performance and asset-light model. Q3 adjusted EBITDA was $21.4 million, a record 8.5% margin compared with 3.4% a year ago. Q3 incremental adjusted EBITDA margin was 21% year-over-year, driven by strong revenue growth, gross margin and operating efficiencies. Our U.S. segment continues to show scaling profitability with adjusted EBITDA margin of 10.3%, while our International segment adjusted EBITDA showed significant improvement year-over-year. At the end of the third quarter, cash and cash equivalents and marketable securities were $505 million.

We generated $25.6 million in operating cash flow year-to-date through Q3, driven by strong operating leverage and working capital efficiency. In the third quarter, we invested approximately $15 million in cash CapEx, almost entirely software related, reflecting our technology investments in the platform and accelerating product rollouts. We are focused on improving cash flow conversion given our asset-light model and limited capital spending. Our disciplined execution has led to strong revenue and gross profit growth in our AI-native marketplace, coupled with significant operating leverage and increased operating cash flow generation.

We are focused on strategically balancing future investment with a relentless pursuit of operating leverage given the vast market opportunity and our low penetration rates. As we rapidly expand beyond the $1 billion run rate, we have a clear trajectory for improving adjusted EBITDA margins while sustaining our investment in growth.

Now moving on to guidance. We are again raising our outlook for 2026, which includes higher revenue and profitability for the full year. For the fourth quarter, we expect revenue in the range of $254 million to $256 million or 32% to 33% growth year-over-year. We expect Q4 marketplace growth to be approximately 35% to 36% year-over-year, driven by ongoing momentum from our growth initiatives. We expect Q4 services revenue to be flat to slightly up year-over-year. In Q4, we expect adjusted EBITDA of $22 million to $22.5 million compared to $8.4 million in Q4 2025. For the full year 2026, we are raising our revenue growth outlook to approximately 37% from 33% to 34%, driven by approximately 41% marketplace growth. For the full year 2026, we expect adjusted EBITDA in the range of $68 million to $68.5 million, approximately $7 million higher than prior guidance and approximately 20% incremental adjusted EBITDA margin.

As we look further ahead, we believe that we are in the opening innings of a digital transformation with a very long-term growth trajectory. We expect strong durable growth to continue to compound in the coming years given the large fragmented market opportunity and our strategic growth initiatives. We continue to target at least 20% incremental adjusted EBITDA on a full year basis above the $1 billion revenue run rate. We look forward to updating you on our Q4 call and providing a detailed outlook for 2027 at that time.

Prior to taking your questions, I would like to extend my gratitude to our entire team. Today's strong performance is a direct result of their relentless execution, and I'm thrilled about the opportunities it unlocks for our future. With robust momentum, a large addressable market and a proven team, we remain committed to fostering a values-driven culture where top talent thrives. Together, these factors give us immense confidence in what lies ahead. With that, operator, can you please open up the call for questions.

Operator

[Operator Instructions] Our first call comes from the line of Andrew Boone of Citizens.

Phần hỏi đáp

Andrew Boone

I would love to get an update on Siemens. As we think about the progress you guys are making with the partnership, can you guys highlight any key milestones that we should be looking out for ahead? And then are there any additional details that we should be expecting as we start to flow this through in terms of expectations for 2027? And then for my second question, I'd love to talk about the growth of larger accounts, 40% revenue growth of accounts of $0.5 million. Can you guys just talk about the drivers of moving upmarket and the penetration of larger spenders on the platform? What does that imply for us looking from the outside in? Is that the move into larger orders? What does that do for revenue visibility? Can you just flesh out what exactly is driving that and the benefits for the platform?

Sanjeev Sahni

Thanks, Andrew. This is Sanjeev. I'll take the question first and happy to have James join in after. On Siemens, I think we are very, very happy with the progress we are making. The collaboration is truly global with integrated teams from multiple products, regions and departments working on the effort. As we go through '27, like I mentioned on the prepared remarks, we'll start with a beta launch in Q1 '27. And then Siemens has various different versions of design center. It's called NX cloud and installed on the site. You will see as we launch each one of these, we will actually come up with formal launch events together with Siemens that you will be made aware of. So you will start to see those happen throughout the year as customers are able to sign up freely and are able to actually use those. Lots of exciting actions will happen on that front throughout the year, beginning in Q1.

James Miln

And Andrew, I'll just kick off on enterprise and Sanjeev will be able to add in. I think what you've seen is sustained durable enterprise growth as we really become more structural and embedded in the workflows. And that's getting increasing program volume with our largest customers. We've talked about we ended '25 with 4 customers over $10 million. And we do expect more as the year goes on. And we ended last year with over 140 accounts with more than $0.5 million spend, and we really continue to see great growth there. And the enterprise playbook is really driven by both technology and improving our sales efforts. Driving increasingly adopting our enterprise tools, including Teamspace and the ability for us to punch out into ERP integrations, which further embeds Xometry in the customer workflow. So we feel we're really becoming a strategic supply partner, which is giving us greater visibility and confidence in terms of the trends that we're seeing and the growth ahead.

Sanjeev Sahni

Absolutely. And I think to me, the other trend to marry that with is growing number of greater than 500,000 accounts, while we continue to expand our margins. You saw a 36% margin that we reported gross margin of the marketplace that we reported this quarter, it's the highest ever. So even as we continue to scale up our presence and integrations with the enterprise customers, some of the largest in the world, we continue to drive our gross margin higher, which truly is a testament to the product-led growth strategy that we've been talking about for the last year.

Operator

Our next question comes from the line of Brian Drab of William Blair.

Brian Drab

Congrats on a great set of results here. First, on the record net adds, can you talk about what levers you're pulling there to -- at this point in the company's life cycle that you're still adding that many customers in the quarter? And are you seeing more success at the larger enterprise customers or smaller businesses? Any insight into the breakdown?

Sanjeev Sahni

Thanks for the question. I would say the growth has been truly broad-based across categories, customer types and products that we offer. To me, the growth is a testament to continued application of our product-led growth strategy. As you remember, we've been talking about as adoption continues to happen in large enterprises, buyers once they get used to the truly exceptional e-commerce experience that we provide on our marketplace, they help us actually become not only profit and champions for Xometry within the organization, but that actually kicks off an engine that helps us bring more buyers into the funnel. So therefore, really I still believe we are at a very early stage of a very, very large pool of millions of buyers that are out there that we continue to go after. And with the partnerships like Siemens, that's also going to further accelerate as that comes on. But right now, our focus is on truly delivering on our 5-part strategy, including pillars on that, which include exceptional experience on the marketplace and continue to drive the volumes of active buyers and suppliers.

James Miln

And I can add, I think that the team are executing well here through improvements we've had through product-led strategy and martech personalization efforts. And those are an important driver of us sustaining this over 40% marketplace growth, 43% growth in the quarter. I think we are seeing that our brand awareness investments are paying off. We're getting greater direct traffic. Just as also, I think the team are making a lot of progress in how we deploy our paid media spend across multiple channels, both owned and those that we're paying. So seeing great execution across and both from brand-new buyers and new accounts as well as continuing to penetrate more deeply in existing large accounts with new buyers, which is great to see.

Shawn Milne

And Brian, it's Shawn. I'd just add on to what Sanjeev and James are saying with the corporate marketing initiatives and seeing good growth there and then the martech improvements, what you see is improving marketplace unit economics overall. Our gross margin is up -- marketplace gross margin is up year-over-year. And our ad spend, you can see in our deck, is down to 3.0%, an all-time low. So improving marketplace unit economics as well.

Operator

Our next question comes from the line of Nick Jones of BNP Paribas.

Nicholas Jones

I have 2, I guess, as we think about kind of the active buyer growth algorithm from here, maybe into '27 and beyond, I think you said there's millions out there. How should we think about kind of, one, kind of the right level of your ability to acquire new buyers as you kind of improve sequential and year-over-year nominal active buyers? And of kind of the millions you see, what is the mix that you think could maybe spend at least $50,000? And then I guess maybe kind of what ties into this is how should we think about kind of level of investment in international as the growth there continues to improve?

Sanjeev Sahni

Let me start. I think the important thing to think about is we are at 1% of the penetration of the TAM at $275 billion, this is very, very early innings of a transition from offline to online for a custom manufacturing setup, which is truly even today really executed in a small radius of 30- to 50-mile radius from a factory. You couple that with the trends we have all seen in aerospace, defense and physical AI, we are very, very encouraged that the movement offline to online is only going to accelerate and that will continue to bring more buyers to look for best-in-class platforms like ourselves, which can continue to apply AI and our models to actually serve up the best experiences at the best price at the speed the customer really wants. And I think to me, for an asset-light marketplace like ours, that really becomes a true advantage and brings the funnel of price selection speed that we've been talking about for a while to really drive the strategy.

James Miln

And Nick, I think in terms of that international plays an important role here in like we're seeing very strong performance there, similar unit economics, similar use cases for our buyers and suppliers in international and excited about the opportunity of taking the playbook of the enterprise and product-driven growth to international and to continue to see strong scaling there. We're very pleased in the quarter to see some good improvement on profitability there. This will remain an area of investment, but I think it's a key driver of both buyers and marketplace revenue growth over time.

Operator

Our next question comes from the line of Bryan Smilek of JPMorgan.

Unknown Analyst

It's Andrew on for Bryan. Just wanted to follow up again on enterprise accounts. And if you could maybe talk about some of the gating factors or remaining friction points that you might be seeing that may limit further wallet share expansion with existing enterprise accounts and your view on that.

Sanjeev Sahni

Thanks, Andrew, for the question. I think on the enterprise accounts, we are very, very focused on truly filling up our insights in the place where the customers continue to work. As you can imagine, our first pillar of strategy is to become the digital infrastructure for custom manufacturing. And the way the enterprise motions work is most enterprises prefer to have their employees stay within their current setup, right? So whatever platforms they use. And that integration with Trade Centric and all of the procurement platforms as an example, the punch out capabilities is an example and then continuing to work on the Siemens platform, build design center and scaling that is going to be important.

So for us, we continue to double down on making it easy for our enterprise customers to work with us, whether that's working through our sales teams, working through our integrations super happy in what we are seeing. You've seen the growth that we've given on Teamspace. I mean at this point, we have 17,000-plus Teamspace users globally. The punchout integrations continue to scale. I mean we ended the last year at 4 customers over $10 million and expect that in 2026, you will have that number go up as well. So the friction is not necessarily one that we are not solving. The friction is actually something we are extremely focused on removing. And structurally, that is helping us win more and more.

Operator

Our next question comes from the line of Ron Josey of Citi.

Ronald Josey

Sanjeev, I want to ask a little bit more about the new e-commerce architecture. You talked about just faster product updates and increasing conversion rates as a result. Help us understand a little bit more just on the product cadence and what we can expect going forward with the new architecture. And then James, I want to ask a little bit more about capital allocation and plans here given the strength of the balance sheet.

Sanjeev Sahni

Thanks for the excellent question, Ron. Really appreciate it. Our efforts in the last 1.5 years with our product-led strategy has been truly making sure that the second pillar of our strategy, which is around improving the experiences for our buyers and suppliers online stays true. I mean we've -- like I mentioned on the prepared remarks, we've completely revamped the e-commerce platform. It is all internally now API focused. So it is also very, very future looking in terms of agent workflows and how we integrate with those. We continue to actually focus on the most used journeys by our customers, whether they are preordered as they shop.

You heard about the process recommendation engine and what that's done for us, including preorder extension into post order, so things like repeat and how customers are able to repeat order quickly in one click. I think that's been the other big focus. Things that I would expect from a truly world-class e-commerce platform. In fact, I think this opportunity to also talk a little bit about agentic commerce, right, which is a true differentiation and strategic advantage for us. I will say our platform now with the API structure is already ready to leverage the AI architecture we've just rolled out and the supplier networks of the physical manufacturing of the products that is a true advantage for us. Our marketplace is now focused on truly solving the complex order journey in a digital native mechanism for the true real-world challenges of custom manufacturing.

In fact, what we've already done and it is some of the benefit we are starting to see in Q3 is agents today can already interact with our site, learning about selection, categories and capabilities and taking it back to the foundation models. In fact, internally, we are using agents to drive work streams that focus on our customer interactions. We're actually very, very focused on continuing to look at the trends around generative CAD and agent purchasing, which we think will further accelerate the digital transformation in custom manufacturing. And as you know, driving the offline to online is a core part of our strategy and surfacing our insights into as an infrastructure there for custom manufacturing is key to us. So you will see us continue to actually lean into the tailwind that we see from agent e commerce as demand increases, and we continue to monitor that very, very closely.

Shawn Milne

Ron, it's Shawn. Just take a look at the investor overview that was posted this morning. There's a couple of new slides that talks about our AI architectural changes that we've made recently and the e-commerce playbook and changes to the marketplace that Sanjeev was talking about.

James Miln

And Ron, this is James. So on capital allocation, as you can see here from Sanjeev, we've got a lot of exciting opportunities ahead of us that we're keen to continue to invest in a disciplined manner as we grow strongly here and grow profitability and cash flow. As a reminder, we ended Q3 with $505 million in cash. That's after strengthening our balance sheet this year with a $50 million investment from Siemens as well as approximately $250 million follow-on. This puts us in a strong position where we can focus on our strategy, investing in organic growth focused on driving sustainable profitable growth over the long term as we continue to increase our adjusted EBITDA profitability and that flows through to cash flow.

We are looking at areas of inorganic growth as well where we could through specific tuck-in acquisitions in a disciplined way, expand our offerings and geographies to help augment our technology and talent and continue to drive into the large growth ahead. But overall, we want to maintain our balance sheet and flexibility. We have an asset-light model, and we're focused on investing for product growth.

Operator

Our next question comes from the line of Scott Devitt of Rosenblatt.

Scott Devitt

Great quarter and 4Q guide. I'm curious, as investors start thinking more about '27, '28, can you just talk through the long-term model build for the marketplace business? Should investors be focused on sequential growth based on historical trend and tested by 2-year stack growth? Is it going to be simply growth in buyers and revenue per buyer? I would like to better understand just how to think about the next few years. And then secondly, I'd love to hear your thoughts on the implications of the Schneider Electric PTC deal and how it fits into your view of the future of the industry.

James Miln

Scott, it's James. So yes, as we talked about on the call, we're very excited about being at the innings here of the digital transformation. we see a very long-term growth trajectory. I think as we've mentioned on the call already, we see a lot of opportunity and continue to grow out the buyers and buyer demand over time, both domestically and internationally. I think there's a lot of opportunities there to continue to see very sustained buyer growth. And then from a revenue per buyer perspective as well, the growth that we've seen as we capture more enterprise continues, I think, to have a lot of opportunity ahead. And I think as we get into the next year and give guidance, what we'll be able to do there is give a little bit more color on the mix between international and domestic and various other growth initiatives that sort of balance between buyer growth and buyer growth.

Shawn Milne

Scott, the one thing I would just add on, you can see in our slides and presentations, we've said over the $1 billion run rate, we'll continue to deliver at least 20% incremental adjusted EBITDA margin. So if you're looking at EBITDA growth, keep that in mind.

Sanjeev Sahni

And to your question on the trends in the industry with this kind of Schneider BDC, actually, I think we are very, very excited about opportunities like that where investments in the CAD space, together with manufacturing changes is actually going to further accelerate the tailwind that we want to drive so hard, which is continue to focus on off-line to online conversion. The more such collaborations happen, the more people will look for new solutions that are cutting edge and are best-in-class. And with the platform that we've built, with the intelligence that we're actually servicing in other platforms, I think we continue to actually benefit from the changes that you're seeing with things like that. So very, very welcome and look forward to a lot more.

Operator

Our next question comes from the line of Greg Palm of Craig-Hallum.

Greg Palm

I wanted to ask maybe a follow-up on the net buyer additions because that's what kind of really stood out to us. I mean you're seeing this acceleration apart from like improved end market demand or are supply chain conditions worsening? Like is labor availability becoming a bigger risk? I don't know, it would be helpful to get a little bit perspective on kind of some of these structural tailwinds that maybe you're experiencing. And I guess as a follow-up in light of this, you've got Siemens ramping up next year. I know we got to wait another quarter for formal guidance, but any way to sort of frame up, Sanjeev, I think you said strong compounding growth expectations, just not exactly sure what that means.

Sanjeev Sahni

First and foremost of your question. I think I would say the challenges in the market, truly, we are not seeing those at all. As you can see, when you're an asset-light marketplace, you are not tied down with a specific set of assets that continue to drag down any challenges that may happen in a specific segment or a part of the industry. For us, as an asset-light marketplace, which has truly applied AI in the field where we're looking at costing sourcing DFM at a very, very minor level, we are able to actually find capacity that is actually waiting for demand and use that capacity to actually surface the opportunities that supply needs, but also continuing to make sure that in the process, our margin numbers continue to improve.

You've seen us accelerate our margin, GM going up to 36%. Why we continue to scale, that happens mainly because we apply that AI to find unused pockets of supply that the demand is really requiring. So I think these are the times when asset-light marketplaces always shine kind of again, we've seen that come through in other categories as well. So we are very positive on continuing to actually use that to our advantage and actually take market share from everybody who may be tied down by assets that they own.

To your point on compounding growth, yes, there is not a number in there that we can plug into a model just yet. Of course, we'll give you 27 guidelines in the next quarter. But to be very specific, like just the beginning of the innings that we are at, you've seen us drive significant growth in this market just in the last 1.5 years. And you can see we continue to target profitability, adjusted EBITDA growth. I think all of those pieces continue to come together as the asset-light model continues to find capacity that needs to learn.

Shawn Milne

Yes. And I think we're always balancing growth and profitability, but still very excited about that long-term opportunity that's ahead of us.

Operator

Our next question comes from the line of Eric Sheridan of Goldman Sachs.

Eric Sheridan

Maybe following on this theme and attacking it from a qualitative perspective of your philosophy around margins relative to growth. So given the growth momentum you have in the business now, how should we be thinking about sort of anchoring around the 20% of at least 20% or elements where your priorities might shift between optimizing for margin or optimizing for growth as you think about the long term and what that balance might look like? And the second part of the question would be, how should we be thinking about the scaling of margins internationally as the business builds in terms of the revenue base?

James Miln

Thanks, Eric. It's James. I'll kick off and maybe have Sanjeev talk a little bit about our gross margin algorithms. I think it's 2 parts really, but the gross margin that we talked about that to 35% to 40%. And within that, what we've seen this year is as we've rolled out these improving algorithms, it's given us the ability to respond and those to respond to what we see in the marketplace, whether that's leaning into market share driving or margin. So I think while the continued journey is into that long-term range, we have -- I think our marketplace responds to the demand signals that we're seeing, and we'll see that play out.

On the operating expense side, I think it's just a very relentless pursuit of leverage here and focus and discipline across our teams as well as utilizing automation and AI tools to help us continue to see improvements there. You've seen that in marketing over the last year as well as in our sales and G&A. And I think we'll continue to invest in product, which will also be able to improve operations and support over time as well. So I think that those are the algorithms that we're looking at. And with the large opportunity ahead, I think we've given you that framework of at least 20% such that if we see the opportunity to drive to the -- between market share gain and growth versus margin, we have that ability.

Sanjeev Sahni

And again, I think over the long term, we expect to expand further into our target range of 35% to 40% gross margin as well, which will actually continue our 6-year trend of year-over-year growth in marketplace gross margins. So that commitment you have from us. The main drivers there for this continued expansion are again back to our 5-part strategy that we spoke about and the continued delivery that you've seen on those elements already.

And then on international, we saw some good progress this quarter, which I think we'll see in the second half here. And I think we'll continue to be focused on that improving. We've already -- when we look at the segment that you'll see in the Q, whilst overall margins are 8.5%, the U.S. is at 10%. So making really good progress towards the long-term target on marketplace adjusted EBITDA margin. And again, international remains a huge opportunity for us that we're excited about investing in.

Operator

Our next question comes from the line of Troy Jensen of Cantor Fitzgerald.

Troy Jensen

Congrats on this nice stretch of great results. James, a question for you. You kind of just hit on it a little bit. It was the international adjusted EBITDA. It was almost a breakeven this quarter. I guess I was curious if there's more incremental flow-through on kind of margins in international sales than U.S. given just kind of where it is right now? And then also, if I could throw in just a second question here, is the flow-through margin for the Siemens channel also going to be greater than 20% incremental?

James Miln

Thanks, Troy. So yes, I think in international in the quarter, there was some expense favorability that I think is a little bit of a one-off. So I think the flow-through we had this quarter was particularly strong. I think that will balance out in Q4. Overall, I'd say the gross margin is pretty similar. And I think we can see us achieve the same similar types of flow-through as we're targeting overall when it comes as we get into '27 over a long period. And to your question on Siemens, that's exactly right. Without the sales and marketing associated with having to acquire those buyers when they do flow through, they should be flowing through at a higher incremental margin.

Sanjeev Sahni

I think the main international opportunity truly is about growth. As we said before -- we've now created a playbook that you started to see work in the U.S. We hired a new GM to lead Europe, and you'll see that same playbook being rolled out in international over the next few quarters. And that should actually truly be very exciting given Europe historically has always been faster trajectory for us, just growing even this quarter, revenue grew 32%, up from 39% even in Q2. So even through this period, we are continuing to accelerate international, but there's lots more opportunity that's still there.

Operator

Our next question comes from the line of Matt Swanson of RBC.

Matthew Swanson

It feels like the last few quarters or the last year has kind of been the most rapid innovation cycle that we've seen from the company in terms of both product and updates. And then we're also seeing more and more partnerships, obviously, Siemens and then now with Trade Centric. Could you just talk a little bit more about kind of how you think about your internal development cycle versus where you want to partner and then where you might want to kind of develop in parallel with partnerships?

Sanjeev Sahni

That's a very, very interesting question. I will say we have actually been always AI first as a company, the company started off with instant quoting engine ITV, which was built on a data science model. That data science model now we've converted into an interconnected set of models that span the entire order-to-part journey. As part of these integrations, as you called out, the true insight that we generate on the part through our DFM or the potential pricing that will hold in the real world and somebody would be ready to produce for, we want to surface that in other places. So to your point, when we actually surface with our first pillar of strategy, that intelligence in other marketplaces that in other software tools and partners, that will not just be us. It will be actually joint development for those outcomes as well.

In fact, I mentioned a little bit in my comment around Agentic that in Agentic, we are actually super excited about what we are seeing in generative CAD and the Agentic purchasing there. And in fact, those spaces are some of the hottest spaces for conversations that we continue to have with various players.

Operator

This concludes our question-and-answer session. Thank you for your participation in today's conference. This does conclude the program. You may now disconnect.