Cuộc họp công bố kết quả kinh doanh Q3 2026 của Lincoln Electric (LECO): Doanh thu tăng 15%, nâng triển vọng

Lincoln Electric Holdings (NASDAQ: LECO) đã báo cáo doanh số và lợi nhuận điều chỉnh kỷ lục trong quý 3 năm 2026, nhờ sản lượng tăng trưởng mạnh mẽ ở khu vực Châu Mỹ, Châu Á - Thái Bình Dương, mảng tự động hóa và thiết bị. Chi phí đầu vào tăng cùng cơ cấu sản phẩm không thuận lợi đã gây áp lực lên biên lợi nhuận gộp, nhưng ban lãnh đạo kỳ vọng sự cân bằng giữa giá bán và chi phí sẽ đạt được trong quý 4.

Điểm tin chính

• Doanh số quý 3 tăng 15% so với cùng kỳ năm ngoái lên 1,221 tỷ USD, nhờ sản lượng tăng khoảng 9% và giá bán tăng 6%.
• EPS điều chỉnh tăng 21% lên mức kỷ lục 2,98 USD. Lợi nhuận hoạt động điều chỉnh tăng 19% lên 220 triệu USD, trong khi biên lợi nhuận hoạt động điều chỉnh mở rộng 60 điểm cơ bản lên 18,0%.
• Mảng tự động hóa đạt doanh số 232 triệu USD trong quý, với mức tăng trưởng tự thân ở cận trên 10% (high teens). Mức đơn hàng tồn đọng kỷ lục cùng tỷ lệ đặt hàng mạnh mẽ củng cố dự báo của ban lãnh đạo về mức tăng trưởng tự thân ở mảng tự động hóa đạt cận trên một chữ số trong 12 tháng tới.
• Biên lợi nhuận gộp thu hẹp 190 điểm cơ bản xuống 34,8% do việc điều chỉnh giá bị trễ và cơ cấu sản phẩm không thuận lợi. Ban lãnh đạo kỳ vọng sự cân bằng giá/chi phí và mở rộng biên lợi nhuận gộp so với cùng kỳ năm ngoái trong quý 4/2026.
• Lincoln Electric đã nâng triển vọng tăng trưởng doanh số thuần năm 2026 lên khoảng từ 11-13% và tăng dự báo chi phí vốn lên 140 triệu - 150 triệu USD.
• Dòng tiền từ hoạt động kinh doanh đạt 216 triệu USD, với tỷ lệ chuyển đổi tiền mặt hàng quý đạt 107%. Công ty đã hoàn trả 143 triệu USD cho cổ đông thông qua cổ tức và mua lại cổ phiếu.

Kết quả tài chính chính

Chi phí SG&A duy trì tương đối ổn định ở mức 206 triệu USD. Tỷ lệ SG&A trên doanh số cải thiện 260 điểm cơ bản xuống 16,9%, phản ánh đòn bẩy hoạt động. Chi phí bao gồm 5 triệu USD đầu tư bổ sung của doanh nghiệp liên quan đến chiến lược RISE và các sáng kiến đi kèm.

Hiệu quả kinh doanh và hoạt động

Mảng Hàn khu vực Châu Mỹ

Doanh số tăng khoảng 16% lên 801 triệu USD, nhờ sản lượng tăng 13% và giá bán tăng 2,4%. Sản lượng thiết bị và tự động hóa đều tăng trưởng ở mức cận trên 10%, trong khi sản lượng vật tư tiêu hao tăng ở mức trung bình đến cận trên một chữ số.

EBIT điều chỉnh tăng khoảng 27% lên 167 triệu USD. Biên EBIT điều chỉnh mở rộng 190 điểm cơ bản lên 20,1%, nhờ tăng trưởng doanh số tự thân và hiệu suất tự động hóa cải thiện, bị bù đắp một phần bởi bất lợi giá/chi phí.

Mảng Hàn Quốc tế

Doanh số tăng 3% lên 227 triệu USD. Giá bán đóng góp 2,4% và các thương vụ thâu tóm đóng góp khoảng 2%, trong khi sản lượng giảm 1%. Tăng trưởng ở Châu Á - Thái Bình Dương bị bù đắp bởi chi tiêu vốn yếu tại Châu Âu và doanh số giảm ở Trung Đông.

EBIT điều chỉnh giảm 7% xuống 24 triệu USD, và biên EBIT thu hẹp 100 điểm cơ bản xuống 10,3%. Xung đột tiếp diễn tại Trung Đông đã làm giảm doanh số mảng này khoảng 5 triệu USD trong quý.

Harris Products Group

Doanh số tăng 29% lên 193 triệu USD, phản ánh mức tăng giá khoảng 26% và sản lượng tăng 3%. Tăng giá chủ yếu phản ánh chi phí kim loại đầu vào cao hơn, đặc biệt là bạc. Nhu cầu thiết bị HVAC và khí hỗ trợ sản lượng, trong khi mảng bán lẻ vẫn chịu áp lực từ xu hướng suy yếu của thị trường nhà ở.

EBIT điều chỉnh tăng 21% lên 34 triệu USD. Biên EBIT điều chỉnh giảm 100 điểm cơ bản xuống 17,3% do cơ cấu sản phẩm không thuận lợi và kém hiệu quả trong vận hành.

Tự động hóa và các thị trường cuối

Doanh số tự thân mảng tự động hóa tăng ở mức cận trên 10% lên 232 triệu USD. Các đơn hàng tự động hóa và thiết bị mạnh mẽ đã đưa lượng đơn hàng tồn đọng lên mức kỷ lục, tạo thế chủ động cho công ty bước vào năm 2027, theo ban lãnh đạo.

Cả 5 thị trường cuối đều tăng trưởng trong quý. Doanh số tự thân ở mảng chế tạo chung tăng ở khoảng giữa 20%, trong khi mảng năng lượng và thép cấu trúc phi dân dụng tăng ở mức khoảng 15%. Ngành công nghiệp nặng và vận tải đều ghi nhận mức tăng trưởng trên 10%.

Doanh số tại Mỹ tăng hơn 20%. Khu vực Châu Á - Thái Bình Dương tăng trưởng trên khắp Trung Quốc, Ấn Độ và Bắc Á, trong khi thị trường Châu Âu nòng cốt tương đối ổn định so với cùng kỳ năm ngoái.

Triển vọng từ ban lãnh đạo

Ban lãnh đạo đã nâng dự báo tăng trưởng doanh số thuần cả năm 2026 lên khoảng từ 11-13%, nhất quán với kết quả từ đầu năm đến nay.

Trong quý 4/2026, công ty kỳ vọng:

• Hiệu suất giá/chi phí trung tính, hỗ trợ mở rộng biên lợi nhuận gộp so với cùng kỳ năm ngoái.
• Biên lợi nhuận hoạt động điều chỉnh bổ sung ở khoảng giữa 20%.
• Biên EBIT điều chỉnh của mảng Hàn khu vực Châu Mỹ đạt 20%-21%.
• Biên EBIT điều chỉnh của mảng Hàn Quốc tế đạt 12%-13%.
• Biên EBIT điều chỉnh của Harris Products Group đạt khoảng 18%, với giả định giá kim loại ở mức hiện tại.
• Tác động bất lợi tới doanh số mảng Hàn Quốc tế từ 6 triệu - 7 triệu USD do xung đột Trung Đông.
• Chi phí SG&A hàng quý ở mức 210 triệu - 215 triệu USD, bao gồm chi phí doanh nghiệp khoảng 4 triệu - 5 triệu USD.

Công ty đã nâng dự báo chi phí vốn năm 2026 lên 140 triệu - 150 triệu USD từ mức dự báo ban đầu là 110 triệu - 130 triệu USD. Công ty đã đầu tư 112 triệu USD trong 9 tháng đầu năm và có kế hoạch chi tiêu thêm cho công suất và năng lực vận hành.

Các giả định cả năm về chi phí lãi vay, thuế suất và tỷ lệ chuyển đổi tiền mặt không thay đổi. Ban lãnh đạo tiếp tục mục tiêu tỷ lệ chuyển đổi tiền mặt đạt khoảng 100% cho năm 2026.

Rủi ro và các yếu tố cần theo dõi

Chi phí năng lượng, logistics và linh kiện điện tử tiếp tục tăng khi việc đầu tư vào trung tâm dữ liệu AI gây ra tình trạng thiếu hụt cục bộ một số nguyên liệu thô. Mặc dù Lincoln Electric đã thực hiện điều chỉnh giá trên cả ba phân đoạn, ban lãnh đạo nhận định lạm phát mang tính dai dẳng và cho biết công ty vẫn chưa bắt kịp đà tăng chi phí từ các nhà cung cấp.

Các áp lực khác bao gồm cơ cấu sản phẩm không thuận lợi, tình trạng kém hiệu quả trong vận hành tại Harris, chi tiêu vốn yếu ở Châu Âu, nhu cầu bán lẻ liên quan đến nhà ở suy yếu và sự gián đoạn tiếp diễn tại Trung Đông.

Giá bạc tạo ra rủi ro về mức nền so sánh cho Harris trong năm 2027 khi công ty bắt đầu tính tròn năm mức tăng mạnh ghi nhận trong năm 2026. Ban lãnh đạo kỳ vọng nhu cầu hệ thống làm mát tăng mạnh từ các dự án trung tâm dữ liệu sẽ bù đắp một phần.

Điểm nhấn phần Hỏi & Đáp với chuyên gia phân tích

Triển vọng tự động hóa và lượng đơn hàng tồn đọng

Ban lãnh đạo kỳ vọng mảng tự động hóa đạt mức tăng trưởng tự thân cận trên một chữ số trong 12 tháng tới, nhờ các đơn hàng mới và lượng đơn hàng tồn đọng kỷ lục. Một số dự án ngành ô tô chu kỳ dài gắn với các dòng xe ra mắt vào năm 2029 và 2030 có thể bắt đầu đóng góp doanh thu sớm hơn theo phương pháp kế toán phần trăm hoàn thành.

Ban lãnh đạo mô tả nhu cầu tự động hóa ngành ô tô gần đây là sự trở lại mức bình thường sau hai năm tạm dừng các quyết định đầu tư vốn xung quanh các nền tảng xe động cơ đốt trong, xe hybrid và xe điện. Đầu tư liên quan đến công suất trong ngành ô tô vẫn ở mức hạn chế do sản lượng sản xuất hiện tại vẫn tương đối thấp.

XpertLINC và doanh thu định kỳ

Lincoln Electric đã giới thiệu XpertLINC là một nền tảng AI vật lý được thiết kế để robot hàn tự điều chỉnh theo sự biến đổi của linh kiện thực tế mà không cần lập trình thêm. Ban lãnh đạo tin rằng công nghệ này có thể mở rộng việc áp dụng tự động hóa ở các nhà sản xuất có sản phẩm đa dạng, sản lượng nhỏ (high-mix, low-volume), dù công ty nhận định sản phẩm còn quá mới để định lượng mức mở rộng tổng thị trường có thể tiếp cận (TAM).

Phí đăng ký XpertLINC năm đầu tiên đã bao gồm trong đơn hàng mua ban đầu. Phí duy trì hàng năm tiếp theo là khoảng 3.000 USD cho mỗi cobot hoặc robot.

Mức độ tiếp xúc với mảng trung tâm dữ liệu

Ban lãnh đạo ước tính hoạt động trung tâm dữ liệu đóng góp tỷ lệ từ trung bình đến cận trên một chữ số phần trăm (mid- to high-single-digit) doanh số của Harris Products Group và dưới 5% tổng hoạt động kinh doanh của Lincoln Electric. Mức độ tiếp xúc bao gồm nhu cầu hệ thống làm mát tại Harris và một số dự án tự động hóa nhất định, mặc dù phần lớn sự tham gia của công ty là gián tiếp.

Phân bổ vốn

Lincoln Electric đã đầu tư 41 triệu USD cho chi phí vốn trong quý và hoàn trả 143 triệu USD cho cổ đông, bao gồm 43 triệu USD tiền cổ tức và 99 triệu USD mua lại cổ phiếu. Hội đồng quản trị đã tăng tỷ lệ cổ tức hàng năm thêm 10% lên 3,48 USD/cổ phiếu, đánh dấu năm thứ 31 liên tiếp công ty tăng cổ tức hàng năm. Đợt thanh toán đầu tiên với mức cổ tức cao hơn dự kiến diễn ra vào tháng 1 năm 2027.

Biên bản đầy đủ cuộc họp báo cáo kết quả kinh doanh

Toàn văn cuộc gọi công bố kết quả kinh doanh

Phần trình bày của ban lãnh đạo

Operator

Greetings, and welcome to the Lincoln Electric 2026 Third Quarter Financial Results Conference Call. This call is being recorded.

It is my pleasure to introduce your host, Amanda Butler, Vice President of Investor Relations and Communications. Thank you. Amanda, you may begin.

Amanda Butler

Thank you, Melissa, and good morning, everyone. Welcome to Lincoln Electric's Third Quarter 2026 Conference Call. We released our financial results earlier today, and you can find our release and this call slide presentation at lincolnelectric.com in the Investor Relations section.

Joining me on the call today is Steve Hedlund, our Chairman and Chief Executive Officer; as well as Gabe Bruno, our Chief Financial Officer. Following our prepared remarks, we're happy to take your questions.

But before we start our discussion, please note that certain statements made during this call may be forward-looking, and actual results may differ materially from our expectations due to a number of risk factors and uncertainties and which are provided in our press release as well as in our SEC filings on Forms 10-K and 10-Q.

In addition, we do discuss financial measures that do not conform to U.S. GAAP. A reconciliation of non-GAAP measures to the most comparable GAAP measure is found in the financial tables in our earnings release, which again is available in the Investor Relations section of our website, lincolnelectric.com.

And with that, I'll turn the call over to Steve Hedlund. Steve?

Steven Hedlund

Thank you, Amanda. Good morning, everyone. Turning to Slide 3. We reported record third quarter sales and earnings performance with adjusted EPS increasing 21% to $2.98. Our results highlight two important trends we navigated in the quarter. First, accelerating demand in core areas of the business; and second, challenging operating conditions that we are diligently managing. Our strong earnings were driven primarily by operating leverage from mid-teens percent organic sales growth led by 9% volume growth. This is the first quarter in over 2.5 years that volume growth has outpaced price and volume momentum remains robust through October.

However, energy, logistics and electronic component costs continue to increase with unprecedented AI data center demand, creating spot shortages for some raw materials. While our supply chain and operations teams demonstrated great teamwork and agility in managing these supply challenges, the additional cost impacted our gross profit margin. We implemented price actions during the quarter in all 3 segments, which will enable us to achieve price cost neutrality in the fourth quarter.

We improved our adjusted operating income margin by 60 basis points to 18% at a 22% incremental margin, which was in line with our September update and delivered top quartile ROIC at 23.9%, up 170 basis points compared with the prior year. We also focused on long-term growth and returns as we executed our capital allocation strategy. We invested $41 million in growth and returned $143 million to shareholders in the quarter. We remain focused on serving our customers, advancing our RISE strategy and positioning the company for long-term success.

Turning to Slide 4 to cover growth drivers in the quarter. Organic sales growth was broad with growth across all 3 reportable segments, product areas and in all 5 end markets. Organic growth was largely driven by higher volume demand in the Americas region and Asia Pacific and in select product areas in the Harris Products segment.

Sales in the U.S. increased over 20% and Asia Pacific continued to expand with growth in China, India and North Asia. Core Europe was relatively steady versus prior year, and we are starting to see benefits from European import tariffs and some defense spending. The Middle East was more resilient than expected with a $1 million sales headwind in the quarter. Capital spending continued to improve with high teens percent organic sales growth on automation resulting in $232 million in automation sales in the quarter. Equipment organic sales growth also accelerated to a low teens percent rate in the quarter.

Strong order rates in both automation and equipment in the third quarter have elevated our backlog to new record levels, which positions us well for 2027. Consumable volumes increased to a mid-single-digit percent rate on a consolidated basis and performed higher in Americas and Asia Pacific, where we are seeing the strongest level of industrial and infrastructure activity.

Looking at end sector trends on a consolidated basis, all 5 end markets grew in the quarter. General fabrication organic sales grew mid-20% with the outperformance reflecting solid industrial production activity in the Americas as well as data center-related projects and rising HVAC demand in Harris. Energy and nonresidential structural steel organic sales increased mid-teens percent with energy outperforming in Americas Welding and oil and gas due to strong project activity given the region's optimal positioning in the energy marketing.

Heavy industries and transportation both grew at a low double-digit percent rate. Heavy industries continue to see strengthening in construction and mining to support infrastructure, data center and mineral investments, while agricultural demand appears to be stabilizing. Transportation and automotive growth benefited from easier prior year comparisons in both production rates and in timing of automation shipments. We expect growth to continue in the fourth quarter as well.

Separately, the October Domestic Auto Industry survey indicated a pickup in 2029 and 2030 model launches following 2 years of unprecedented compressor. That outlook is consistent with the increase in quoting activity we are seeing for long lead time automation systems for transportation customers.

Moving to Slide 5. At the FabTech trade show last week, we launched over a dozen new solutions that address customer pain points and expand the addressable markets we serve. For example, Arc Tracker Air provides customers with an easy to deploy platform that enables them to track productivity across their welding operations regardless of the mix of brands or type of welding equipment in use. We also launched a hot wire emerged arc welding solution for our heavy industry sector customers that delivers up to 50% improvement in deposition rates using their existing installed base of Lincoln equipment with only modest incremental investments. Our new instruct arc extended reality welding trainer supports workforce development and training by providing a more realistic simulation of the welding experience.

And finally, I am most excited about the launch of XpertLINC, our physical AI solution that will revolutionize welding automation. Featured initially on our Cooper cobot, XpertLINC enables a welding robot to adapt on the fly to real-world conditions like an experienced human welder wood. This capability significantly reduces barriers to adoption and broadens the market for cutting and welding automation. We will be integrating XpertLINC technology across our automation portfolio over the next few years, which will further differentiate the value of our innovation and support our rise growth objectives.

I will now pass the call to Gabe Bruno to cover third quarter financials in more detail.

Gabriel Bruno

Thank you, Steve. Moving to Slide 6. Third quarter sales increased 15% to $1.221 billion. Sales growth reflected approximately 9% higher volumes and 6% higher price. We anniversaried the acquisition of Alloy Steel in August, which contributed 50 basis points to sales growth. Gross profit increased 9% to $425 million on higher sales. Our gross profit margin compressed 190 basis points to 34.8%, primarily due to the timing of our new price increases, which went into effect late in the quarter and unfavorable mix. On a year-to-date basis, we are lagging on neutral price cost target by 100 basis points and expect to achieve a neutral price cost position in the fourth quarter.

SG&A expense was relatively steady versus prior year at $206 million, while SG&A as a percent of sales improved 260 basis points to 16.9% as a result of sales leverage. SG&A expense included an additional $5 million in corporate investments related to the rollout of our RISE strategy and related initiatives. Given current RISE investment activity and business performance, we are maintaining our quarterly SG&A estimate at $210 million to $215 million, with corporate expenses likely in the $4 million to $5 million range in the fourth quarter.

Reported operating income increased approximately 20% to $211 million, primarily on higher sales leverage. Adjusted operating income increased 19% to $220 million, and our adjusted operating income margin improved 60 basis points to 18% with a 22% incremental margin. Third quarter diluted earnings per share increased 19% to $2.63. Adjusted earnings per share increased approximately 21% to a record $2.98. We recognized a $0.04 benefit from share repurchases, and there was no impact from foreign exchange translation.

Moving to our reportable segments on Slide 7. Americas Welding sales increased approximately 16% to $801 million, primarily from 13% higher volume and 2.4% higher price. Americas volume growth was broad-based across all product groups and end markets and in key market channels. Equipment and automation each delivered high teens percent volume growth supported by strong capital spending. Consumable volume growth increased to a mid- to high single-digit percent rate as industrial activity accelerated. Price reflects the benefit of the May price action. We expect price in Americas to be in the low to mid-single-digit percent range in the fourth quarter, reflecting third quarter price actions.

Americas adjusted EBIT increased approximately 27% to $167 million. Adjusted EBIT margin expanded 190 basis points to 20.1%. The increase was driven by higher organic sales and improved automation performance, which was partially offset by price cost headwinds. We expect Americas Welding margin to perform in the 20% to 21% EBIT margin range for the fourth quarter, given sales momentum and improved price cost performance.

Moving to Slide 8. International Welding segment sales increased 3% to $227 million on 1% lower volume, 2.4% higher price and approximately 2% benefit from acquisitions. With an international welding continued strength in Asia Pacific was offset by weak capital spending across Europe and lower sales to the Middle East. The ongoing conflict reduced segment sales by approximately $5 million in the quarter. We continue to expect a $6 million to $7 million sales headwind in the fourth quarter.

Adjusted EBIT decreased 7% to $24 million. Adjusted EBIT margin compressed 100 basis points to 10.3%, primarily due to lower volumes and in automation performance. Sequential performance versus the second quarter was better than seasonal trends due to a pickup in demand in our Alloy Steel acquisition and incremental structural savings. We expect international welding margin performance to be in the 12% to 13% range for the fourth quarter.

Moving to The Harris Products Group on Slide 9. Third quarter sales increased 29% to $193 million, primarily from a 3% increase in volumes and approximately 26% higher price. Price primarily reflects higher metal input costs in consumables, particularly silver. HVAC and gas equipment demand supported volume growth while the retail channel remained challenged on soft housing trends. We expect HVAC demand to remain strong in the fourth quarter, further aided by an easier prior year comparison.

Adjusted EBIT increased 21% to $34 million on higher sales. Adjusted EBIT margin declined 100 basis points to 17.3%, which was below our expected range due to unfavorable mix and operational inefficiencies. We expect the Harris segment to operate at approximately 18% margin in the fourth quarter at current metal prices.

Moving to Slide 10. Cash generation was strong with $216 million in cash flows from operations. Working capital improved to 16.6% of sales on higher sales levels as well as improved inventory positions. We achieved 107% cash conversion for the quarter and are at 99% on a year-to-date basis, which is in line with our 100% target for the year.

Moving to Slide 11. We invested $41 million in capital expenditures and returned $143 million to shareholders, including $43 million in dividends and $99 million in share repurchases. Adjusted return on invested capital improved to 23.9%. Our dividend is an important component of our capital allocation strategy. The Board recently announced the company's 31st consecutive annual increase in the dividend payout rate, raising the annualized rate by 10% to $3.48 per share. The increase reflects confidence in the execution of our RISE strategy, the strength of our cash generation and our commitment to return value to our shareholders. The first payment at the increased rate is payable in January 2027.

Moving to Slide 12 to discuss our 2026 operating assumptions. We are raising both our full year sales growth rate and our capital expenditure range to reflect stronger demand trends and higher RISE strategy investments. We now expect net sales growth to be in the low teens percent range for the full year, which aligns with our performance year-to-date. We are maintaining the updated assumption we provided in September for price/cost and our adjusted income incremental margin.

We expect price/cost will be neutral in the fourth quarter which will support year-over-year gross margin expansion in the period as well as a mid-20% incremental adjusted operating income margin. We are increasing our 2026 capital expenditure range to $140 million to $150 million as compared with our initial assumption of $110 million to $130 million. We have invested $112 million in the first 9 months and are continuing to invest to upgrade operating capacity and capabilities in the fourth quarter.

Our full year interest expense, tax rate and cash conversion assumptions are unchanged. Looking ahead, our priorities are to execute on our RISE initiatives, serve demand in growing areas of the market and invest for long-term returns. We continue to expect strong earnings performance as we advance those priorities.

And now I would like to turn the call over for questions.

Operator

[Operator Instructions] Your first question comes from the line of Bryan Blair with Oppenheimer.

Phần hỏi đáp

Bryan Blair

I was hoping you could offer some more color on the momentum and outlook for your automation strategy. It seems like demand is broadening you mentioned kind of the medium-term outlook with changeover activity in the automotive space. Maybe touch on quoting activity across other end markets there. And then given your backlog position in current REIT, where do you see automation revenue shaking out for 2026? And what's the preliminary outlook to the extent you're willing to speak to that for 2027?

Gabriel Bruno

Yes. So Bryan, so I just reiterate the level of growth we've seen very active quoting activity and broad-based. And we pointed to the mix of end market progression, including the automotive market. So we're pleased to see the long-term trajectory of model launches turning positive in 2029 and 2030, which leads us to believe that a lot of the quoting activity that we've seen in longer lead time items would progress into orders as the months progress.

So we're really keen on a continued progression of growth in our automation business. I think about that in the high single-digits organic type growth I'm very much positioned to continue to expand the margin profile of our business. We exited the third quarter at a low double-digit type EBIT profile, and we expect more of the same in the fourth quarter.

Steven Hedlund

Bryan, I would just add that Gabe's comments really apply to the historical base of the business, which has been large portion of automotive automation projects, some for heavy industries, particularly supporting mining, construction, agricultural equipment. We're seeing improvement across the legacy base of the business. We're also very excited about the opportunity to grow the addressable market, particularly in the general industries, general fabrication space by making the technology more easily -- easy for customers to adopt.

One of the big problems those customers have is their parts aren't entirely consistent lot-to-lot due to upstream variation. And historically, that's made it hard for them to adopt robotic solutions, whether that's an industrial robot or a cobot. And we're really excited about the launch of the XpertLINC platform that's going to address that pain point and significantly open the market up for the long-term.

Bryan Blair

That's encouraging. I appreciate the color. And then in terms of your Middle East exposure, we know the headwind that has been there and you've framed anticipated Q4 in fact. Looking forward to hopeful resolution of the war. How should we think about how much of a catalyst rebuild efforts and redundancy security investments may be for your business at least over the medium term?

Gabriel Bruno

This is Bruno, Bryan. You saw that while in the international segment, we had a headwind of $5 million overall. We were down once. We saw strength in exports coming out of the Americas and Harris segments. So we're well positioned. And you can think about the headwinds turning into volume opportunities for us as projects progress in their investment trajectory as well as any rebuilding. So we're well positioned in the Middle East, and we look to growth as the conflict is resolved. And markets return to some basis of what is normal.

Operator

Your next question comes from the line of Angel Castillo with Morgan Stanley.

Angel Castillo Malpica

I wanted to touch on the pricing power a little bit, maybe just to unpack the price/cost dynamic in a bit more detail. Just you noted passing through a little bit more price towards the end of the quarter. So just curious, as you're having discussions with customers, OEMs or distributors. Just can you kind of update us on what you're seeing or hearing in terms of overall kind of elasticity to kind of price given the organic volumes, it would suggest that you're not really seeing any deterioration there just but given how much inflation we've been having, would be curious to see your thoughts on your ability to continue to kind of push price?

Steven Hedlund

Angel, I would say that our channel partners and our end users are experiencing the same inflationary pressures that we are. So this isn't coming as a shock to them. Nobody likes talking about pricing because it takes your attention away from other matters, but we're not getting a tremendous amount of pushback in either case because people understand that certain parts of the economy are running hot with the AI data center build-out. And it's a constant surprise the breadth of commodities on products that are impacted by that. So it's never at the old moment, and we're doing our best to be agile and stay on top of it, but it's a constantly chasing target that we're going after.

Gabriel Bruno

Yes. Angel, I would add that in a firm what we've updated the market in September as we expect in the welding business, about 100 basis points incremental pricing impact that would lead us into a price cost neutral posture in Q4. So we've maintained that posture. But as you know, we'll continue to monitor the persistent inflationary dynamics and respond as appropriate.

Angel Castillo Malpica

That's very helpful. And maybe just on that note, as we think about kind of your preliminary thoughts or what you're able to see into 2027, can you talk about the kind of key kind of cost buckets and what you're seeing across all of those. I think you noted earlier maybe some pockets of kind of shortages of supply. So just any kind of thoughts on what kind of inflation or cost inflation you're kind of anticipating into next year?

Gabriel Bruno

Well, Angel, I would say just not get into specifics about inflationary type conditions into 2027. But I would say that we're very well postured with what we're seeing in the market for what our strategic framework on organic sales are, which I would just reiterate it's mid- to high single-digit type organic growth of which would lean on an acceleration in automation growth in the high single digits. So we're very well postured for that kind of trajectory as we get into 2027.

Operator

Your next call comes from the line of Neal Burk with UBS.

Neal Burk

Maybe another way to kind of ask about automation growth trends. I mean is there any way to kind of bifurcate between more cyclical improvement on 1 hand, but also more secular growth from increased automation adoption. I asked because the comments about the automotive end markets seem more cyclical. I'm not sure is that quoting activity is hitting revenue yet, but automation sales are broadly outperforming your other product categories despite low double-digit growth broadly outperformance of automation on top of that.

So just trying to get at how much of this high-teens automation growth is cyclical versus more kind of automation adoption driving secular growth?

Steven Hedlund

Yes, Neal, cyclical is an interesting word. Important to realize that we had an unprecedented 2-year period where the automotive manufacturers we're walking back their commitment to transition from ICE to EVs. And then trying to figure out whether they were going to go headlong into the hybrid platform, whether they're going to return to ICE, et cetera. And that caused what we described as an air pocket of decision-making among those end users. They knew they were going to do something, they didn't know exactly what they were going to do. And as a result, that really created a period where the end users were unable to make a decision regarding automation CapEx.

We're now getting through that, and we're seeing the resumption to more normal level of activity. So on year-over-year basis, it does look like a significant step up. I would say it's more a return to normalcy in the automotive market. In terms of using technology to broaden the applicability of automation. I think we're still in the very early innings of that. It started first with the launch of cobots and the Cooper software that made a cobot easier to program. We got a lot of feedback from customers that an operator still had to have a fair amount of welding knowledge to be able to set the feeds and speeds on the welding procedure in order to make the cobot useful to them.

So we were hard at work at trying to address that with the physical AI solution and we're very confident that, that platform is going to significantly broaden the market going forward. But again, that's a product that was just launched last week. So I don't think we're seeing the benefit of that yet in our order book.

Gabriel Bruno

And Neal, just to add to that, when you think about the mix of our business, you've heard us emphasize the intentionality of driving more activity and small, midsized fabricators and general industries in general and structural and heavy fab.

So you're seeing a progressive mix in those end markets in a smaller percentage of the overall mix in automotive, although automotive is an important part of our mix of business. So all the investments we're making in the technologies will progress our positioning in general industries.

Neal Burk

That's helpful. And one follow-up on margin. You're expecting improvement from low to mid-20% incremental margins for the company in 4Q. I know there's a lot of moving parts around cost inflation, which continues. But based on where we are today, is kind of mid-20s is the right way to think about incrementals going into next year? Or are there enough sort of price cost tailwinds or normalization to maybe think about approaching your high-20 incremental target for the long-term?

Gabriel Bruno

Yes, one, I would start with that mid-20s as we exit Q4, but our line of sight is to drive to that high 20s incremental margin. So very much focused on expanding our margins as part of our 2030 objectives, 300 basis points. That implies about 60 basis points per year of improvement. So that's really our focus. So you'll continue to see a level of execution that's anchored around that 60 basis points improvement on an annual basis.

Steven Hedlund

Yes, Neal, I would say is pleased as we are with the performance of the business, particularly with organic growth resuming. We recognize that the incremental margins are a little shy of where we would like them to be. And the persistent inflation we've seen in the business has been a constant game of whackable in terms of being hit with a surprise cost increases from our suppliers who are seeing themselves increased demand from data centers. So we're competing for the same parts as people building data centers in many cases.

And so -- we've been aggressive in taking price actions to cover that. We've just been constantly 1 step behind, which is not a position we'd like to be in. So we believe that we've taken enough price to cover what we already know in the business. We'll be diligent about continuing to manage price going forward. And we're very focused on driving productivity in the operations, whether that's manufacturing or the back-office operations of the company to help us hit that incremental margin target.

Operator

Your next question comes from the line of Mig Dobre with Baird.

Mircea Dobre

Good morning, everyone. Sorry, I want to go back to automation as well, that's what the focus of the day is. But I'm just looking to make sure that I understand kind of what you're communicating here. It sounds like essentially, you're pretty much said at the beginning of the year, acceleration in automation in the back half that is happening. What I'm hearing is incremental is your comment on auto and especially on '28 and '29.

So I guess my question is, do you have enough near-term sort of visibility to shipments to suggest that automation can continue on this growth trend in 2027? Or is more 2028, 2029 business that you're booking. So our expectations really ought to be more about those out years.

Gabriel Bruno

Yes. So Mig, we're talking about the next 12 months. I'm talking about high single-digit type growth. We've seen enough in incoming orders and another record level of backlog that gives us confidence of strong momentum going to 2027.

The long lead time items will also have an impact depending on how the orders progress for fulfilling 2028 to 2029 build-outs still. So -- but we have the confidence based on what we've seen in orders and our backlog levels that carry the momentum into 2027.

Steven Hedlund

Mig, it's important to remember that for some of the very long cycle projects, we're on percent completion accounting. So as we do the work in 2027 to get ready for a project that might be supporting a '29 launch, we're recognizing some of the revenue in '27. We also have more confidence in the general industry, general fabrication part of the business. that is a little shorter cycle, right? So more standard weld cells and cobots that we would ship in several weeks, not several quarters. And given the demand trends we're seeing in the business right now, we have more confidence in that part of the business for 2027.

Mircea Dobre

That's great. My follow-up want to talk a little bit about Harris Products Group. And here, obviously, pricing has been very strong, but silver prices have pulled back. So when should we expect negative pricing, if at all, presumably, we will have some based on current commodity prices. And is there a rule of thumb about how that flows to EBIT in terms of the contribution to either incremental dollars or margin or EBITDA, however you want to frame it for us.

Gabriel Bruno

Yes. So Mig, I think it's important to note that our discussions are all based on what we currently see in the market. So let's say you're tracking in the high 50s, low 60s petrol, gas, on silver prices. if you just use that kind of assumption in Q4, we're talking about low double-digit type price increases versus the mid-20s that we saw in Q3. That's the framework that gives us confidence at that 18% EBIT profile. And that's kind of what we see at this point in the model. We'll have some positive impacts on volumes. We're starting to see that. But right now, we see our business model and Harris at that 18% type profile.

Steven Hedlund

And then Mig, maybe we'll start anniversarying against some of the big run-up in silver earlier this year as we turn into 2027. The way that we manage pricing in that part of the business is to try to maintain a fairly constant gross margin percentage on those sales. Obviously, if silver prices double, you have twice as many dollars running through the P&L. So you get some nice SG&A leverage.

And on an EPS basis, you get a little bit of a tailwind from that. So as we look forward in the Harris business, we're aware that there is a looming comp issue on silver pricing going into next year, but we're also seeing a strong pickup in demand for people who are providing cooling systems, data centers, and that's going to help that part of the business as we go forward. So some -- so various puts and takes as we think about the Harris business in '27.

Mircea Dobre

I appreciate that.

Operator

Your next question comes from the line of Chris Dankert with D.A. Davidson.

Unknown Analyst

This is Peter on for Chris today. Coming off FabTech last week of customers reacted to new product launches, including XpertLINC and I think secondly, in regard to physical AI, are these new products are a result of customer-specific requests to the company trying to source new opportunities?

Steven Hedlund

Yes. Great question, Peter. I would say the reaction to customers across the board to the products that we highlighted at FabTech was extremely positive and very encouraging. And I'd like to give kudos to the team that was working the booth there. I thought they did a tremendous job sharing their passion for our products and helping customers resolve their issues around productivity and quality and the like.

And all of the products we're launching are directly aimed against customer pain points. including XpertLINC, which was not necessarily customer driven in the sense of people asking specifically for it that more reflects our decades of experience in the welding industry and our knowledge of what tends to go wrong when people try to automate their wealth cutting and welding processes.

So you could say that at some level that reflected our understanding of customer needs, but it was primarily internally driven.

Unknown Analyst

That's helpful. And I guess for my follow-up, in terms of the raised CapEx outlook for the year, could you provide some additional color on that?

Gabriel Bruno

Yes. You've seen a trend, Peter, over the years of our continued investment in our operations. And you point to the ROIC performance. We will invest in capacity and any capabilities, including automation within our own facilities and new products to be able to drive organic growth. So we're very much focused on an increasing level of investment in our operations.

Steven Hedlund

Peter, I would say that historically, the rate limiting factor on organic internal CapEx, which is the highest returning investments we make in the business. The rate-limiting factor hasn't been our willingness to invest. It's our capacity to execute the projects. And we've been working very diligently to improve our capability and capacity to execute these projects on time, on budget and to do more of them faster. So that's why you're seeing a pickup in the CapEx investment.

Unknown Analyst

Great. I'll pass it on.

Operator

Your next question comes from the line of Nathan Jones with Stifel.

Nathan Jones

[indiscernible] to talk a couple of questions on automation. I think, Steve, you talked about the automotive side of this getting back to a more normal level. I think the planned model launches in '29 and '30 are anything but a normal level, they're significantly above a normal level. Now it's questions about whether or not they can get them all launched. Can you talk about the opportunities that creates a little bit further out for the automation side of the business, just given the magnitude of those product launches and would that be a '28 event primarily? I know you said some long lead time stuff in '27, but that would primarily be running through revenue in '28 from that kind of thing?

Steven Hedlund

And Nate, I would say if you think about automotive, in particular, right, there's 2 drivers of CapEx related to automation. One is model changeovers which historically have happened pretty much like clockwork, right? And we talked a little bit earlier on the call about the air pocket and the recovery from that. The second is production rates, right? As production rates increase, we see investments in capacity to help those customers keep up with demand.

And right now, automotive build rates are still fairly low, right? So we're benefiting from the pickup now and model changeover investments, but we're not really seeing the big capacity-driven investments. So I think it's fair to say that we're encouraged by where the automotive portion of automation is headed. It's still early innings, and we're hopeful that we're going to continue to grow that business, both in automotive and in the other end markets that we serve.

Nathan Jones

Okay. The second one I wanted to ask was more around the AI-powered cobot outlook and how that could change the growth profile? I think over the years, a lot of the automation increase in the addressable market has been improvements in the software that enabled more automation or material handling that enabled more parts of the market to be automated. Can you talk about how you think this AI-powered cobalt something that could be a bit more flexible and well something that's maybe a little less predictable plays out over the next few years in terms of increasing the TAM that is addressable by automated welding that maybe isn't today, if that makes sense?

Steven Hedlund

Yes. A fair question, Nate. Look, I'm really excited about it because over the years, as I've talked to customers, their biggest frustration is my parts aren't perfect, and I know my parts aren't perfect. If I had [indiscernible] human doing the welding operation, they would see, for example, the gap getting wider, they would slow down, they would leave they would increase the wire feed speed. They know what to do to adapt to those parts.

The problem with a robot or a cobot historically is you've given it one path and one set of parameters and it just repeats those irrespective of what the actual reality of the parts in front of it is. So that -- that's been a huge pain point for customers. Historically, your only real option was to invest in fixturing or tooling to force the parts back in the tolerance, which automotive can afford to do given the production volumes. But if you're a high-mix, low-volume manufacturer. It's just been uneconomical and infeasible for them to automate certain parts of their operation.

The feedback that we were getting at the show is this is an absolute game changer. It basically allows a robot to operate like a human wood and adapt on the fly with no additional programming, no additional training. And so people are really excited about it. How much it will increase the TAM, great question. And as we go through the course of 2027, we'll probably have a better perspective on that when we see what customers or how they're actually deploying XpertLINC and what applications they're using it for.

Nathan Jones

We look forward to hearing about that next year.

Operator

[Operator Instructions]

Your next question comes from the line of Steve Barger with KeyBanc Capital Markets.

Unknown Analyst

Steve, I just want to follow up on that last comment with end markets broadening out and automation looking like it's picking up, is the sales team focused now on adding customers who haven't automated because they've been scared of the programming or just the difficulty of getting it to work, or are you more focused on increasing the number of automated applications with customers who already get it because they've already bought systems?

Steven Hedlund

Yes. Great question, Steve. I'd say both, right? So if we look at some of the businesses we have within the automation portfolio, for example, Zieman that the structural steel welding we're going to deploy XpertLINC into their systems to make them even more effective than they are already, right? So to create competitive differentiation with other solutions that are targeting existing automation customers.

And then more importantly is to look at all those customers that have attended a demo of a cobot and decided that's neat, but I just can't use that in my operations, right? I have too much part variability I have too much -- too many changeovers. This isn't going to work for me. And we've had a lot of customers get excited about what they believe the potential of a cobto was and then disappointed with the reality of what it actually took to make one work. And so that's what we're trying to address with this technology platform is to really deliver on what the initial promise and premise of cobotic welding was, right? Very easy to use, doesn't take a skilled or trained operator and significantly addresses real-world problems that our customers face.

Unknown Analyst

Got it. Does XpertLINC have a subscription element to it? Or is it a onetime sale?

Steven Hedlund

It has a subscription element to it. The way that we're pricing it is the first year subscription is included as part of the original purchase. And then there is an ongoing subscription fee that is about $3,000 a year per use or per cobot or robot.

Unknown Analyst

Per device, yes. Okay.

Steven Hedlund

Yes.

Unknown Analyst

And then, Gabe, 1 quick follow-up. I just want to make sure I understand. You get to neutral price cost in 4Q. What -- how much temporary gross margin pressures remain, and I guess what is the clean underlying incremental margin starting point for 2027? Are you back to mid- to high 20s?

Gabriel Bruno

Yes, I would say we would start off at mid 20s. We do expect -- I don't know if you picked up on my comments, Steve, that gross profit margin will exceed the prior year fourth quarter. So we do believe that we took the pricing actions necessary to get to neutral. And as we progress into Q4 and into 2027 that we've achieved that mid-20s type incrementals.

Unknown Analyst

Okay. Got it.

Operator

The last question comes from the line of Walt Liptak with Seaport Research.

Walter Liptak

Okay, and good quarter, guys. I wondered, you guys called out equipment being up really solid double digits. And coincidentally, one of your competitors had a tornado and the market seems to have gotten impacted. Did you see a pickup related to that? And is -- and help us understand if that's what happened, if there was -- if it's like a onetime thing or if there was a market share gain related to that?

Gabriel Bruno

Well, it's very difficult to assess that. What we do know is that we've seen consistent demand on standard equipment to track at the high teens level. So I won't comment on the competitive positioning, but we've got a robust level of activity, and we see the same momentum going into Q4.

Walter Liptak

Okay. All right. Great. And then, just the last one. You guys called out data center a number of times and the impact on the welding market. I wonder, have you been able to quantify it either at Harris or at kind of the welding business overall?

Gabriel Bruno

Yes. So Walt, at Harris, we estimate between mid- to high single digits of our Harris segment to be exposed to data center activity. And just to remind you, last year, there was a destocking progression in the fourth quarter 2025. So we've got easier comps. But we're seeing a very good activity, and we expect good momentum on the Harris side to progress into the fourth quarter.

On an overall basis, we do have pockets of projects on the automation side, supporting data center activity. But a lot of the work we do is indirect into the markets. And so we estimate about less than 5% of our overall business that's tied into data center activity.

Walter Liptak

Okay. Great.

Operator

This concludes our question-and-answer session. I would now like to turn the call back to Gabe Bruno for closing remarks.

Gabriel Bruno

Thank you, Melissa. I would like to thank everyone for joining us on the call today and for your continued interest in Lincoln Electric. Our focus remains on converting demand into profitable growth, improving our price/cost performance and investing in differentiated solutions through our RISE strategy. We look forward to updating you on our progress. Thank you very much.

Operator

Thank you, ladies and gentlemen. This concludes today's conference.Thank you for participating. You may now disconnect.