오토데스크(ADSK) 2027 회계연도 2분기 실적 발표 콘퍼런스 콜: 매출 16% 성장 후 가이던스 상향

핵심 요약

• 오토데스크는 2027 회계연도 2분기 매출과 주당순이익(EPS)이 가이던스 상단을 상회했다고 발표했습니다. 공시 기준 매출은 전년 동기 대비 16% 증가했으며, 고정 환율 기준으로는 14% 증가했습니다.
• 청구액은 공시 기준 10%, 고정 환율 기준 12% 증가했습니다. 갱신율은 견조하게 유지되었으며 건설, 신흥 시장 및 기타 AECO(건축·엔지니어링·건설·운영) 부문이 성장을 뒷받침했습니다.
• GAAP 영업이익률은 약 4%포인트 상승한 29%를 기록했습니다. Non-GAAP 영업이익률은 영업 레버리지 효과와 영업 최적화 수혜에 힘입어 약 2%포인트 상승한 41%를 나타냈습니다.
• 오토데스크는 메인테인엑스(MaintainX) 인수 및 자체 기저 실적 전망 상향을 반영하여 2027 회계연도 매출 가이던스를 82억 9,500만 달러~83억 4,500만 달러로, 청구액 가이던스를 85억 7,500만 달러~86억 5,000만 달러로 상향 조정했습니다.
• 메인테인엑스는 2027 회계연도 하반기 동안 약 6,000만 달러의 매출과 7,000만 달러의 청구액을 기여할 것으로 예상됩니다. 오토데스크는 이번 인수를 통해 자사 플랫폼을 설계 및 건설 분야에서 자산 운영 영역으로 확장할 계획입니다.
• 건설 사업 부문은 20% 이상의 성장세를 이어갔으며, 퓨전(Fusion)은 사용자 증가, 연간 계약 가치(ACV) 상승, 멀티 시트 구매 및 AI 기능 도입 확대의 혜택을 받았습니다.

주요 재무 데이터

이익률 확대는 자체 영업 레버리지, 영업 최적화, 매출 대비 주식 기반 보상 비율 감소를 반영했습니다. 오토데스크는 2027 회계연도 매출 대비 주식 기반 보상 비율이 2026 회계연도의 약 11%에서 감소한 약 9% 수준이 될 것으로 예상합니다.

사업 및 운영 실적

기저 모멘텀은 이전 분기들과 전반적으로 일관된 모습을 보였습니다. 경영진은 AECO 분야, 특히 건설 및 신흥 시장의 견조함을 강조했습니다. 미주, 아시아태평양(APAC), 동유럽 및 중동 지역은 영업 조직 개편 이후 상대적으로 빠르게 정상화되고 있는 반면, 서유럽은 여전히 더딘 회복세를 나타냈습니다.

갱신율은 견조하게 유지되었으며, 2분기 청구액 진행 상황은 경영진의 예상보다 우수했습니다. 오토데스크는 유지보수-구독 전환 프로그램에 따른 다년 계약 갱신 축소를 포함해 다년 계약에 대한 할인 혜택을 계속 줄여나갔습니다. 회사는 이것이 시간이 지남에 따라 실질 가격을 개선할 것으로 기대하는 한편, 단기적으로는 미청구 이연매출 및 잔여 이행 의무(RPO) 성장에 부담을 줄 것으로 예상합니다.

건설 부문 매출은 20% 이상의 성장을 이어갔습니다. 경영진은 이러한 사업의 회복력이 오토데스크의 지역 및 고객 다변화, 건설 업계의 낮은 기술 침투율, 그리고 통합 설계·시공 전 단계·프로젝트 납품 워크플로우에 대한 수요 덕분이라고 설명했습니다.

퓨전(Fusion)은 사용자, 연간 계약 가치(ACV), 매출 및 멀티 시트 구매 전반에서 지속적인 성장을 기록했습니다. 경영진은 AI 기능, 오토데스크 어시스턴트(Autodesk Assistant), MCP 커넥터가 퓨전의 성장에 기여하고 있다고 밝혔습니다. 오토데스크는 워크플로우 중심의 AI 자동화가 퓨전에 가장 먼저 적용될 것으로 예상합니다.

메인테인엑스는 실물 자산 유지보수를 담당하는 팀으로 연결되는 운영 접점을 제공합니다. 오토데스크는 엔터프라이즈 고객, 유럽, 파트너 네트워크 및 AEC 고객을 통해 이 사업을 확장할 잠재력이 있다고 보고 있습니다. 당면 과제는 백오피스 통합과 메인테인엑스의 기존 성장 모멘텀을 유지하는 것입니다.

경영진 가이던스

가이던스에는 메인테인엑스의 약 6개월간 실적이 포함되어 있습니다. 경영진은 이번 인수를 통해 하반기 매출 약 6,000만 달러, 하반기 청구액 약 7,000만 달러가 기여할 것으로 예상하며, 두 지표 모두 4분기에 다소 치우쳐 있을 것으로 보고 있습니다.

오토데스크는 신규 거래 모델이 연간 매출 증가율을 약 1.5%포인트 높일 것으로 예상합니다. 경영진은 또한 메인테인엑스 운영 비용이 연간 기준으로 적용됨에도 불구하고, 2028 회계연도 Non-GAAP 영업이익률이 2027 회계연도의 39%에서 소폭 개선될 것으로 기대합니다. 회사는 2029 회계연도에 41%의 Non-GAAP 영업이익률 목표를 달성하겠다는 입장을 재확인했습니다.

리스크 및 주시 사항

• 영업 조직 개편 이후 서유럽의 신규 사업 생산성 회복이 다른 지역보다 더디게 나타나고 있습니다.
• 2027 회계연도에는 오토데스크 역대 최대 규모의 엔터프라이즈 비즈니스 계약(EBA) 갱신 물량이 포함되어 있으며, 특히 4분기에 집중되어 있습니다.
• 다년 계약 할인 축소로 인해 미청구 이연매출 및 잔여 이행 의무(RPO) 성장에 단기적인 압박이 가해질 것으로 예상됩니다.
• 메인테인엑스는 고성장 중이나 아직 수익을 내지 못하는 사업으로, 2027 회계연도 오토데스크의 영업이익률을 희석시킬 예정입니다. 해당 사업의 연간 운영 및 자금 조달 비용은 2028 회계연도에 영향을 미칠 것입니다.
• 경영진의 가이던스는 거시경제 환경이 연내 전반적으로 안정적인 상태를 유지할 것이라고 가정합니다.
• AI 워크로드는 시간이 지남에 따라 총이익 금액을 늘릴 것으로 예상되지만 매출총이익률에는 어느 정도 압박을 줄 수 있습니다. 오토데스크는 이러한 영향이 2029 회계연도 이익률 목표에 이미 반영되어 있다고 밝혔습니다.

애널리스트 Q&A 주요 내용

메인테인엑스 및 프로젝트 인텔리전스: 경영진은 메인테인엑스가 실제 사용 환경에서 건물, 기계 및 기타 자산이 어떻게 작동하는지에 대한 정보를 추가함으로써 설계, 제조 및 운영 전체에 걸친 데이터 루프를 완성한다고 설명했습니다. 오토데스크는 이러한 운영 컨텍스트가 광범위한 AI 및 프로젝트 인텔리전스 전략을 지원할 것으로 기대합니다.

자체 가이던스 개선: 경영진은 기저 청구액 전망이 약 2%포인트 개선되었다고 밝혔습니다. 메인테인엑스에서 약 1%포인트, 핵심 사업 실적 호조에서 약 1%포인트가 기여했습니다. 환율 및 거래 모델 믹스 영향으로 약 1%포인트가 상쇄되었습니다. 환율과 거래 모델 영향을 제외한 자체 청구액 증가율 가이던스는 기존 8%~9%에서 9%~10%로 상향 조정되었습니다.

AI 전략 및 수익화: 오토데스크는 필요한 정확도, 속도 및 비용에 따라 뉴럴CAD(NeuralCAD)를 포함한 자체 모델을 프론티어 및 서드파티 모델과 결합할 계획입니다. 현재 작업 수준의 AI는 구독 서비스에 기본 탑재되어 있으며, 더 깊은 수준의 워크플로우 및 시스템 수준 자동화는 플렉스(Flex)와 같은 제공 항목을 통해 사용량 기반 매출을 더 많이 창출할 것으로 예상됩니다.

플렉스 가격 책정: 플렉스의 최소 구매 금액을 300달러에서 99달러로 낮춘 후, 소규모 고객 사이에서 도입이 증가했습니다. 경영진은 이러한 변화가 사업 전체에 실질적인 긍정적 효과를 가져왔다고 말했습니다.

영업 조직 개편: 내부 영업망과 채널 파트너 모두에서 갱신 생산성이 향상되었습니다. 대부분 지역에서 계획 대비 영업 실적이 2분기에 강화되었으나, 서유럽의 확장 활동은 계속해서 더디게 진행되었습니다.

API 가격 책정: 오토데스크는 자사 기능 및 지적 재산(IP)에 대한 API 및 머신 기반 사용에 대해 요금을 부과하겠다는 의사를 재확인하는 한편, 고객 피드백에 맞춰 적용 일정을 조정하고 있다고 설명했습니다.

실적 발표 컨퍼런스 콜 전문

전체 실적 발표 컨퍼런스 콜 녹취록

경영진 발표

Operator

Thank you for standing by, and welcome to Autodesk's Second Quarter Fiscal Year 2027 Earnings Conference Call. [Operator Instructions]

I would now like to hand the call over to Simon Mays-Smith, Vice President, Investor Relations. Please go ahead.

Simon Mays-Smith

Thanks, operator, and good afternoon. Thank you for joining our conference call to discuss Autodesk's fiscal '27 second quarter results. Andrew Anagnost, our CEO; and Janesh Moorjani, our CFO, are on the line with me.

During this call, we will make forward-looking statements, including outlook and related assumptions on products, artificial intelligence, sales and marketing optimization, go-to-market strategies and trends. Actual events or results could differ materially. Please refer to our SEC filings, including our most recent Form 10-Q and the Form 8-K filed with today's press release for important risks and other factors that may cause our actual results to differ from those in our forward-looking statements.

Forward-looking statements made during the call are being made as of today. If this call is replayed or viewed after today, the information presented during the call may not contain current or accurate information. Autodesk disclaims any obligation to update or revise any forward-looking statements. We will quote several numeric or growth changes during this call as we discuss our financial performance. Unless otherwise noted, each such reference represents a year-on-year comparison. All non-GAAP numbers referenced in today's call are reconciled in our press release and supplemental materials available on our Investor Relations website.

And now I will turn the call over to Andrew.

Andrew Anagnost

Thank you, Simon, and welcome, everyone, to the call. We delivered another strong quarter with revenue and earnings per share above the high end of our guidance ranges. We've raised our full year billings and revenue outlook to reflect the second quarter outperformance and stronger expectations for the second half. Our guidance now also includes MaintainX, following completion of the acquisition on August 3, our strategy, strong execution and the compounding benefits from the business model changes we have made over the years continue to be reflected in the performance of the business.

Autodesk's strategy is to build project intelligence across the asset life cycle by converting design, make and operate through a continuous flow of data, context and experience. While owners have long invested in better design, manufacturing and construction, the opportunity lies in extending the value of that information into decades of operations and then bringing real-world performance back to inform the next generation of projects. This project intelligence across the life cycle enables smarter decisions, greater resilience and continuous optimization.

An enterprise deal we signed during the second quarter brings that strategy to life. With a vision of every project becoming a complete data-rich digital twin, one of the world's largest retailers selected Autodesk Forma as the common data environment connecting, planning, design, construction and operations across its portfolio in North America. Rather than optimizing individual phases, it is creating a connected digital thread that carries trusted project information from concept through construction and into operations. This strategy has led the customer to select Autodesk Tandem as its digital twin platform.

While deployment is still in its early stages, the customer is investing in improving the fidelity of its asset data by capturing and validating as-built conditions, ensuring every facility has the trusted digital foundation required to support long-term operational value. Forma helps create the continuous flow of project intelligence between design intent and operational reality. Combining design and construction data in Tandem creates a digital twin that evolves alongside the physical assets it represents.

Looking ahead, solutions like MaintainX extend that digital thread from systems of record to systems of action, connecting digital twins with day-to-day operational workflows and real-world performance. This is not an isolated deployment. It's a reflection of a broader shift we're seeing as owners move beyond digitizing projects to generating project intelligence across the entire asset life cycle. As design, manufacturing, construction and operations converge around a shared digital foundation, project intelligence doesn't stop at improving today's assets. It creates a continuous feedback loop that informs how the next generation of assets is designed, built and operated.

Before I hand over to Janesh to discuss our quarterly financial performance and guidance, I'd like to say a few words about Amy Bunszel, our EVP of Architecture, Engineering and Construction Solutions, who plans to retire after an extraordinary 23 years with Autodesk. Amy has helped shape Autodesk into the company we are today. Her vision, deep commitment to our customers and leadership through some of our most important transformations have built a world-class AEC business and enduring legacy. I've spent much of my career working alongside Amy, and I'm going to miss her as a colleague and as a collaborator in solving the built world's capacity challenges. She will remain with us as we search for her successor and through the transition, and she leaves behind an exceptional team and an AEC business in a position of strength. On behalf of all of us, I wish Amy the very best in her well-earned retirement.

Janesh, over to you to discuss our quarterly financial performance and guidance.

Janesh Moorjani

Thanks, Andrew. Q2 was another strong quarter. Overall, the underlying momentum of the business was consistent with prior quarters, with strength coming from similar industry segments in AECO, particularly in construction and emerging markets. Overall, the impact from our sales reorganization was in line with the rate of outcomes we had expected. The Americas, APAC, Eastern Europe and the Middle East are normalizing a little earlier than Western Europe.

The overall impact on new subscription growth was once again within the range of our expectations, while the linearity of billings during the quarter was better than we expected. Renewal rates remained strong. Total revenue in the second quarter grew 16% as reported and 14% in constant currency. As expected, the new transaction model provided a tailwind of roughly 2 percentage points to revenue growth in the second quarter. Please see the tables in our press release, earnings deck and Excel financials for details by product and region.

Billings increased 10% as reported and 12% in constant currency. The impact of the new transaction model on billings growth was not significant in the second quarter. During the second quarter, we sustained our program of reducing multiyear discounts established over the last few years including winding down multiyear renewals for the maintenance to subscription program. We continue to expect the reduction of discounting for multi-year contracts to benefit price realization over time while also temporarily weighing on unbilled deferred revenue and RPO growth.

Turning to margins. Second quarter GAAP and non-GAAP operating margins were 29% and 41%, respectively. GAAP operating margin increased approximately 4 percentage points, primarily due to underlying margin improvements and a further reduction in stock-based compensation as a percent of revenue. Non-GAAP operating margin was up approximately 2 percentage points. This primarily reflected operating leverage and the benefits from our sales optimization. Second quarter free cash flow was $561 million, reflecting the timing of billings and collections during the quarter.

Moving on to capital allocation. We repurchased approximately 2.1 million shares during the quarter for $453 million. We continue to expect our share buyback in fiscal '27 to be similar to fiscal '26 in total dollars. We expect to maintain a healthy buyback program that continues to apply approximately 50% of free cash flow to further reduce share count over time. Before I turn to guidance, a quick update on a few minor changes we are making to simplify our revenue presentation and reflect the acquisition of MaintainX.

There are no changes to our income statement revenue presentation. We are making some minor changes to our product family revenue presentation to reflect the acquisition of MaintainX. And going forward, we will stop disclosing Design and Make revenue consistent with our strategy of converging workflows end-to-end and expanding our business and operations. We will continue to provide regular commentary on Construction, Fusion and operations and will also disclose MaintainX's revenue for 4 quarters to help you track the performance of those businesses. The slide deck on our website summarizes these changes.

Let me finish with guidance. Our guidance philosophy is unchanged. Our guidance continues to be based on the range of possible outcomes in our bottom-up sales forecast, which is grounded in the momentum of the business and embed some prudence against our expectations of sales productivity normalization. We've assumed the macroeconomic environment will remain broadly stable through the year. Our guidance now includes the billings, revenue and operating and net financing costs for MaintainX for approximately 6 months of fiscal '27. We expect MaintainX to contribute approximately $60 million to second half fiscal '27 revenue and approximately $70 million to second half fiscal '27 billings, both weighted slightly towards the fourth quarter given the growth profile of the business.

As we have now largely concluded the new transaction model implementation, we will focus our commentary on as-reported numbers in future earnings calls. As a reminder, the tailwind to revenue growth from the new transaction model in the first half of the year translates to approximately a 1.5 percentage point into revenue growth for the full year. For billings, we've raised our fiscal '27 billings guidance to a range of $8.575 billion to $8.65 billion to reflect the contribution from MaintainX and an underlying improvement in our expectations, partly offset by mix assumption on the contribution from the new transaction model and foreign exchange.

For revenue, we've raised our fiscal '27 revenue guidance to a range of $8.295 billion to $8.345 billion to reflect the contribution from MaintainX, our strong results in the second quarter and an underlying improvement in our expectations. For GAAP operating margin, we revised our fiscal '27 guidance to a range of 25% to 27%, primarily to reflect the GAAP accounting effects of the MaintainX acquisition. For non-GAAP operating margin, our fiscal '27 guidance is unchanged, reflecting higher underlying margins from operating leverage and benefits from our go-to-market optimization, offset by the margin dilution from the MaintainX acquisition.

We expect fiscal '28 non-GAAP margins to improve modestly from 39% in fiscal '27 with underlying improvement partly offset by the annualization of MaintainX operating costs. We remain on track to achieve 41% non-GAAP operating margin in fiscal '29. And for free cash flow, we've narrowed our fiscal '27 expectation to a range of $2.725 billion to $2.75 billion, reflecting strong underlying expectations offset by the operating and net financing costs for MaintainX and approximately $45 million of transaction expenses related to the acquisition of MaintainX.

We continue to manage our stock-based compensation with discipline. We expect stock-based compensation as a percent of revenue to be about 9% in fiscal '27, which was within our targeted range and down from about 11% in fiscal '26. In summary, we remain disciplined and focused on the controllable factors that drive our revenue, operating margin, earnings per share and capital allocation, which are the key building blocks of free cash flow per share. The slide deck on our website has modeling assumptions for the third quarter and full year fiscal '27.

Andrew, back to you.

Andrew Anagnost

Thank you, Janesh. Autodesk is focused on creating project intelligence powered by the convergence of our platform, industry clouds and AI. For our customers, convergence increases efficiency and resilience and reduces risk and downtime so they can deploy fewer resources to every project and bid on and win more projects with the resources they have.

Let me give you some examples of our progress in the quarter that demonstrate how this differentiated strategy works. And ENR top 400 U.S. general contractor selected Forma for Construction over a competitive solution for cost management, preconstruction and model coordination, driven by our differentiated platform value. Similarly, Rudolph Libbe Group, another ENR top 400 general contractor selected the Forma operations bundle in a competitive new logo win to standardize workflows from preconstruction through project delivery supported by an ERP integration.

In Europe, a leading infrastructure and Construction company renewed and expanded its enterprise agreement with Autodesk to accelerate digital transformation and low carbon and energy efficient delivery, including using Autodesk platform services to build custom applications for a major transit infrastructure program. In India, a large municipal corporation replaced disconnected solutions with Autodesk AEC, water infrastructure and former offerings to connect civil design, hydraulic modeling and project delivery for a new water treatment plant.

These stories have a common theme: creating project intelligence by converging people, processes and data across the project life cycle to increase efficiency and resilience, decrease risk and prepare for an agentic AI world. It also extends Autodesk's growth potential as the continued strong performance of our Construction business demonstrates. We see even greater potential in operations. In manufacturing, customers demanding convergence as they invest in their digital transformation to leverage granular and unified data and embrace the AI-driven automation capable of industry transformation.

By consolidating on our platform, customers have the flexibility and connectivity across workflows to increase agility, innovation and resilience. For example, a leading German manufacturer standardized on the product design manufacturing collection in Vault to unify fragmented engineering data and streamline proposal and project delivery. U.S.-based central state industrial expanded its use of Autodesk Vault infusion to connect critical data and workflows, improving access to project information, streamlining operations and creating a scalable foundation to manage rapidly growing job volumes and support continued growth.

Another German manufacturer selected Fusion to replace a legacy CAD, CAM solution with an integrated design and manufacturing environment, including 5-access machining. And the Williams company, an American precision machine shop is using nearly the full breadth of Fusion's manufacturing capabilities from cloud tool libraries to simultaneous multiaccess machining and automated probing to modernize and standardize GNC programming across its shop floor. As you can see from these examples, our customers are using more of Fusion's functional breadth with larger installations and designs to make convergence to drive strong growth.

Let me finish by talking about AI. AI is what increasingly turns this connected data and context into actionable project intelligence. It promises to ease endemic capacity constraints, raise the bar on what's possible in the physical world and help our customers do more with scarce resources. To realize that promise, our customers need AI that becomes an active participant in their workflows. They don't want AI that is merely impressive. They want AI that is accurate, fast enough to stay in the flow of work and affordable enough to use every day.

Delivering all 3 at enterprise scale is hard. Accuracy, speed and affordability are often competing constraints. We believe trust is earned by how those trade-offs are managed. The future of AI won't belong to the company with the best single model. It will belong to the platform that combines the richest context with the right models to deliver the best outcomes for customers. That's where Autodesk is uniquely positioned. We bring together decades of industry experience, rich life cycle data spanning design, make and operate and context that connects that information into a shared understanding of our customers' workflows.

We combine probabilistic AI with deterministic engineering, grounding intelligence in the realities of the physical world. We complement those advantages with a common AI platform that can leverage the right model for the right task from trusted third-party and frontier models to Autodesk built models like NeuralCAD, purpose built to reason directly about geometry and design data. And we're building that platform to be open, allowing customers and partners to bring their own intelligence into Autodesk's workflow. We complement all of this with commercial innovations that make AI practical and affordable for customers of every size.

Those capabilities reinforce one another. Richer contacts improves accuracy, intelligent model orchestration improves speed, platform scale and vertical-specific models improve affordability. Together, they earn the trust our customers place in us to deploy AI in their most critical workflows. As more of that intelligence, ours, our customers and our partners connect to the platform, those advantages continue to compound. Every project now leverages historical project data and creates more knowledge. Every asset generates more operational intelligence. Every operational insight improves the next generation of design, engineering and operations.

That continuous feedback loop of project intelligence is creating a durable competitive advantage for Autodesk. And more importantly, an enduring advantage for our customers. That's why we believe AI is more than a feature or a product cycle. It's a fundamental transformation in how the world's infrastructure, buildings, products, and factories will be imagined, built, operated and continuously improved. And because auditor sits at the intersection of these workflows, with the data, context and experience to bring them together, we believe we're building the platform and ecosystem that will define the next generation of AI for the built world.

Autodesk advantage is that we can create product intelligence across the asset life cycle by converging design, make and operate through a continuous flow of data, context and experience. We're excited to tell you more about our plans at Autodesk University a few weeks' time.

Operator, we would like to open the call up for questions.

Operator

[Operator Instructions] Our first question comes from the line of Saket Kalia of Barclays.

질의응답

Saket Kalia

Andrew, I want to pick up on your last line of commentary there at the end, which I thought was interesting. And really through your prepared remarks, you talked about project intelligence a bit. And I want to loop that into some of your product families a bit. And maybe the specific question is, how does the operational data for MaintainX create -- what kind of seems like a data advantage for Autodesk AI when you combine it with the design, the build data that you have. Sorry, there's a lot there, but does that make sense?

Andrew Anagnost

Yes. I think that makes a lot of sense. So first off, let me kind of just elaborate on project intelligence a little bit. There's a lot of decisions that happen in context of a project from Design into Make and Construction or into manufacturing. All of these decisions have reasons. They have 10 associated with them. Project intelligence captures all this in a continuous way.

And what we're doing with MaintainX is we're actually extending that intelligence into the asset's life cycle, which means we're going to be able to capture information and data about how the asset functions in the real world. That is incredibly valuable data because the assets that we're talking about here, buildings, airports, conveyor belts, machines, they're all built by our customers. So that actually closes the loop on the asset cycle and on the context associated with that.

So that's going to allow us to not only train on data about design processes and building processes and manufacturing processes, but also how assets are used and feed that back into the larger cycle, it just increases the value of the cycle overall for our customers.

Saket Kalia

Got it. Very helpful. Janesh, maybe for my follow-up for you. You talked a little bit about guidance philosophy in your prepared remarks. I was just wondering if you could talk a little bit about maybe how we should think about the levels of prudence built into the Q3 and full year guide?

Janesh Moorjani

Saket, I'm happy to do that. So broadly speaking, our guidance philosophy remains unchanged. And just to recap that briefly, the guidance is grounded in the momentum of the business and what we know today. we reflect the opportunities we see, and then we incorporate some level of prudence around the areas where there may still be some variability.

So at the start of the year, our guidance had to contemplate a much wider range of outcomes, particularly around the impact of the sales reorganization on new business productivity. And 6 months into the year, the impact from the reorg has largely remained within the range we expected. Renewals have been very strong. The business has performed much better than our initial assumptions in many areas. And so we've reflected all of that in the outlook. We flowed through the first half revenue outperformance, and we've also raised our expectations for the back half in both billings and revenue based on what we've seen so far.

There is naturally less uncertainty today compared to the past because we're only forecasting the remaining 6 months of the year. But at the same time, we've also got work ahead of us in the second half. We have our largest EBA renewal cohort, as you know, with the concentration in Q4. And we're also focused on the pace of new business productivity normalization, particularly in Western Europe. So the guide reflects that. It reflects the better visibility we have and the remaining work in the back half. But importantly, we had a terrific first half. We are very pleased with the progress we've made so far, and we are very confident in our fiscal '27 outlook.

Operator

Our next question comes from the line of Joshua Tilton of Wolfe Research.

Joshua Tilton

Maybe I'll stick with Janesh since he was on the line prior. First one is, just give us a little bit of clarification. I think we're getting some inbounds on how much exactly was the revenue and the billings raised for the full year inorganically versus the organic contribution. I know that you gave us the inorganic contribution dollars in investor release, but can you just help us fully clarify the math on just like how much organically you raised revenue and billings for the full year?

Janesh Moorjani

Yes, I'm happy to, Josh. So maybe I would just start with billings. The underlying billings outlook improved by about 2 percentage points, 1 point of that comes from MaintainX, which was approximately $70 million, and roughly 1 point comes from just stronger underlying performance that we had in the business. There's an offset on that, which is we had a little bit of headwind from currency and transactional model mix. And so that offsets about 1 point. So I think those 2 translates to about a 1 percentage point improvement.

So said another way, when you think about our prior guidance, excluding the new transaction model and excluding currency, that prior guide was 8% to 9% year-over-year growth. Now that has increased to 9% to 10% year-over-year growth on an organic basis and tack on a point for MaintainX, so that's 10% to 11% year-over-year growth. So that's the underlying increase in terms of the billings. And then in terms of the revenue, we -- you saw that we had a pretty healthy outperformance in Q2, which we then flowed through to the rest of the year. And the specific contribution from MaintainX on billings is only $60 million, and we've raised our organic revenue number by much more than that, as you can see from the direct math there.

Joshua Tilton

Super helpful. And then maybe one for Andrew, and perhaps it's a question with -- you can't answer along the lines as we can't pick between our favorite children type answers. But I couldn't help but notice that M&E is getting put into a bucket called other and all the other segments seem to have a very nice representative name. Is there any reason investors should take that as a signal of maybe less strategic focus on that area of the business than you might have previously had?

Andrew Anagnost

No, you shouldn't. Look, the M&E business is definitely going under a lot of changes. It's going through a lot of transformations here. But the structure of the M&E business, the high-end studio is what they need from us. That work is continuing. We've actually extended our product portfolio in very interesting ways for this segment. They are embracing flow capture, ,some of the tool, flow studio. So our higher-end business is definitely embracing the new technologies we're going.

And we're also expanding the business to grab the new creator economy that's kind of building around that. That's where Flow Studio leads. So there's nothing you should read into that other than it's just a smaller business, and it's easier to capture it in another bucket with the operation solution. That's all you should read.

Operator

Next question comes from the line of Adam Borg of Stifel.

Adam Borg

Maybe the first question, Andrew, just on MaintainX, obviously, the deal has closed. Kind of what's been the early customer feedback on your move to go deeper into operations? And maybe talk about the top R&D and sales and marketing priorities now that it is closed. And then I have a follow-up back there.

Andrew Anagnost

Yes. So let me talk about customer reaction in general. When you look at a lot of our customers, especially in the general contracting space, even in the architecture space and certainly in the manufacturing space, they're all very interested in either improving operations internally for themselves or extending their businesses into operations in some way. Having Autodesk help them do that and having audited us to do it in such a way that we've closed the loop around design, make and operate is very attractive to a certain segment of our customer base.

And they're looking into this and engaging with us on some of these things. We're also seeing lots of synergies with our enterprise accounts. And I think you'll continue to see that just like we did with Construction. In terms of where we're at with the integration, it's very early. We just closed the acquisition early in August. Our main focus right now is on integrating the back office and maintaining the momentum in the business. And that's where our goals are right now.

As you look forward, we're certainly going to have synergies in the business, like I said, around the enterprise accounts. We're going to be able to bring maintain X into those accounts very much like we did in Construction. Again, similar to Construction, we're going to be able to bring the MaintainX business to Europe, another thing that's also a significant opportunity here is MaintainX has been primarily focused on the manufacturing sector. We can bring them more robustly into the AEC sector. And all of that is on top of the new virtuous cycle we're going to be building around design, make and operate. So that gives you a sense for where we're at and some of the reactions.

Adam Borg

That's really helpful. And at the end of your prepared remarks, when you talked about kind of an AI platform, the platform you're building and DI advantages. You did also talk about you're building your own AI models, which I'm sure we'll hear more about today in a couple of weeks. But I think you also talked about there are roles for frontier models as well. So I'd love to hear how you're thinking about -- and I'm sure this will evolve over time. But today, how are you thinking about the role of Autodesk built NeuralCaD models versus frontier models and both as you think about design to make?

Andrew Anagnost

Yes. So what our customers need, Adam, is they need fast answers that are accurate. By accurate, I mean precise, especially in our world, it's a built world. I've often said that probably right is wrong in our world, but they also need cost-effective solution. So what we're looking to do is we're looking to use the right model for the job. And that's going to include a full breadth of different types of models. We're not locked into any 1 type of model.

We'll use a frontier model where it's appropriate for particular type of answer the customer may need. We'll use one of our models when a precise kind of data-driven answer associated with direct context into what they're designing and making is appropriate. And we'll use other models where we see appropriate in order to drive the right kind of cost-effective behavior for our customers. And we'll do this in such a way that we're always leveraging the data we have, the context we have about the customer, and we're packaging it in an experience that actually makes sense for Design and Make.

When you bring all of those things together, you get a sense for what we're doing. We're going to bring the right tools to the right problem at the right time to the customer, but it's always, always about using our data, our context and the experience we deliver to our customer to get fast, accurate and cost-effective answers.

Operator

Our next question comes from the line of Jay Vleeschhouwer of Griffin Securities.

Jay Vleeschhouwer

Andrew, for you first. Your comments about project intelligence for exactly what I had in mind to ask you about based on your recent article on LinkedIn. The question there is actually twofold. One part of that is it's a very AEC biased, oriented comment thus far. How do you see taking that technology or that concept into manufacturing? And does the fact that you have much lower market share in manufacturing than you do in AEC perhaps influence how you're thinking about that.

And then the other project intelligence part of that question before I turn to Janesh is, does this whole concept in any way have any implications for product packaging? You do very bundles and collections oriented to date? I mean, does that necessarily have to change?

Andrew Anagnost

First off, let me address the question around project intelligence and [ AV ]. Projects exist everywhere. Every manufactured product is a project inside of the company. They'll call it a project. They'll have a project code name, right? So project is a generic term for capturing the entire life cycle of information flow from design through either Construction or manufacturing all the way into the operations of the asset. So this is not something that is reserved to the AEC space nor is it intended to be reserved to the AEC space in our framing.

In fact, frankly, some of the deepest usage we're seeing with some of our AI is in our manufacturing product set, in Fusion, in particular. Fusion is continuing to enjoy robust growth, partly because we've closed the loop for an entire project from design to manufacturing and now engaging into operations, especially in the factory world. So this is not something targeted at AEC in any way, shape or form. And it certainly is relevant to what's going on in manufacturing.

On our product packaging, we've said many times over time that -- you're going to see us evolving from task-based automations to workflow-based automations, all the way up to system level automation for our customers. Ultimately, what you're seeing us move to is the industry cloud fusion form inflow is the main way we deliver capabilities to our customers. Subscriptions are still going to be highly relevant for those customers.

But over time, as we move into deeper workflow automations, deeper automations around systems, you're going to see us get involved in more and more consumptive efforts. That obviously changes the way people consume the functionality within Fusion, Forma and Flow in the future. And you should expect as this evolution progresses, customers are more exposed to the functionality and the capabilities from Autodesk, bring to bear what they need and what they need to accomplish to the table and bringing the right functionality there at the right time. You'll probably hear a little bit more about this at AU.

Jay Vleeschhouwer

Okay. For Janesh, any meaningful update with regard to usage telemetry that is in terms of geos or verticals, collection versus stand-alone? Any sort of metrics around that set of data? .

Jay, I'd say, overall, we are seeing pretty healthy engagement across the board. That is very consistent with the strength that we delivered across the business. We see that across geos, verticals as well as the individual products. But I wouldn't be -- I would be a little bit careful not to overinterpret any 1 signal just because usage can be influenced by things like project timing and seasonality and mix and so forth. But the broad patterns that we are seeing are very consistent and similar to what we've seen earlier and the uplift dynamics suggest that continue -- that customers are continuing to deepen their adoption over time. So we're very pleased with that.

Operator

Our next question comes from the line of Joe Vruwink of Baird.

Joseph Vruwink

Congrats to Amy on a great career. I think by now, I've lost count of the fable one-shotting CAD videos I've watched. They're all fun. But I think most often, when I look at the CAD environment, it tends to be Fusion, which is the one actually doing the magic. So I guess my question is whether you've seen evidence of user growth accelerating for applications like Fusion that have MCP connections into an LLM environment?

Andrew Anagnost

What I'll say is the Fusion business is doing quite well. We're very happy with the results for Fusion. We're seeing not only continued growth in user acquisition, continued growth in ACV and revenue, but we're also seeing continued growth in multi-seat purchases, which is exactly what we want to see. The reasons for this are very clear. We've been very deliberate in leading with some of the new automations, leading with MCP connectors.

All of these things you're seeing in the ecosystem, people using various tools with Fusion are quite deliberate and quite intentional on our part in terms of driving the strategy. We've been very AI forward with Fusion and not only with regards to the ecosystem, but also with regards to the functionality we developed. And like I said earlier, our customers on the Fusion side are some of the most deeply engaged with our Assistant and the AI features inside the product. This is absolutely a tailwind to Fusion growth, and we expect that tailwind to continue.

Joseph Vruwink

All right. Great. And then hoping you can comment on your approach to API pricing and how thinking has evolved. I think there were some tweaks recently here in August where you listened to customer feedback and maybe change some of the timing. Just curious kind of what the feedback has been and you're thinking about this going forward?

Andrew Anagnost

Yes. I think that's a great question. Customers are very much aware that we're going to be charging for APIs and machine-based usage. We've actually already charged for some of that usage. We do listen to customers. We do adjust some of our time lines and our intent to make sure that we're matching with customer expectations and customer ramp-up times. But you continue to look for us to charge for access to machine-driven usage to our capabilities, our IP and our products. That's not going to change.

Operator

Our next question comes from the line of Brent Thill of Jefferies.

Brent Thill

Many of your software peers are unveiling AI revenue. I don't know if it's important to you, maybe it's found in other ways. But how do you think about the impact? And is this something you expect that you want to talk about going forward?

Andrew Anagnost

Yes. I want to go back to the framework for AI monetization that we rolled out last year, all right, around cash-based automation, workflow automation and systems level automation. Right now, what we're doing is we're enabling lots of task-based automation in the product, lots of AI-driven automation. It's basically built into some of the subscription offerings we have. And like I've said, it's actually a tailwind to Fusion growth right now. People notice what we're doing and they like it, and it's a very active point of conversation in the Fusion community.

I think you should look at the task-based automation as not only a lubricant but an accelerant to some of the subscription-based businesses as we move forward and we'll treat it as such. But as time goes on and we move deeper into workflow automation, systems-level automation, you're going to see us start to express more consumptive revenue. That will show up through Flex business and other things that are also embedded in how we're reporting in our industries.

So look for us to evolve these things over time. We're not trying to do one-off presentations and some of these things, we're trying to drive real value in our business with our customers through our work on project intelligence.

Janesh, do you want to add anything?

Janesh Moorjani

No, I think that's a good summary.

Brent Thill

And for Janesh, I know you're calling for gross margins to be flat. Many of the other companies we all follow are seeing some compression because of AI. I guess what you're saying is you can embrace some of these tasks and still keep GM flat?

Janesh Moorjani

We can this year, Brent, and that's what we've factored into the model. Over time, as the AI-based workloads and offerings continue to grow, those will be gross profit dollar accretive, but they will put a little bit of compression on gross margin. But that's one of the things that we had also factored into our long-term operating margin target when we roll that out. So that is embedded in the 41% margin target for FY '29.

Operator

Our next question comes from the line of Elizabeth Porter of Morgan Stanley.

Elizabeth Elliott

So first, I wanted to continue on the line of some of the pricing dynamics. And I believe in early June, you lowered the Flex and minimum purchase from [ $300 ] to [ $99 ] to make it more accessible for SMBs. So while it's still early, I'd love to better understand what you're seeing thus far, whether any changes in new logo activation, repeat token purchases or lower checkout abandonment? How the change can be economically accretive?

Andrew Anagnost

Yes. So we are actually seeing down market changes in adoption based on those Flex changes. The customers really wanted -- that was a customer-driven change. Customers wanted access to tokens in smaller bundles that matched how they were going to work. We view this as part of the long-term strategy around Flex. Integrating Flex deeper into our business, allowing customers to access all the capabilities in the portfolio and also allowing them to mix and match how they drive occasional use of one product versus deep usage of their other products.

So yes, we have seen some acceleration in adoption of Flex, and it has been net accretive to the business, which is great. That will be something we continue to do on -- in an ongoing basis. So watch that space over time.

Elizabeth Elliott

Great. And then just as a follow-up, on this sales reorganization, what are some of the leading indicators that you're seeing now in terms of [indiscernible] productivity pipeline creation or some of the time to ramp that improved in Q2? And maybe what are some of the ones that you're still looking to turn the corner? And how are you looking at signs just to confirm that the disruption has and more of that risk is actually behind us now?

Andrew Anagnost

Yes. So Elizabeth, I'll kind of echo what Janesh said in his opening commentary. But one of the places we've seen actual real productivity increases, and it was one of the places we were targeting is in renewal business. Our renewals are much more productive now, both internally and through the channel partners. And that was a major goal of what we were trying to do is move -- increased productivity of the renewal business, shift more effort into expansion business, new business generation in both the channel and internally inside the company.

We've also seen all the green shoots associated with the expansion business internally and with the channel. The one area that Janesh highlighted is, and this is because of consultation periods and all the things associated with mature Europe, it's been a little slower to ramp up on the expansion business. We're seeing the signs. We're seeing continued growth in pipeline associated with kind of forward-looking indicators that tell us we're moving in the right direction. But that's the dynamics right now. We're seeing exactly what we expected with a slower buildup in mature Europe.

Janesh Moorjani

And maybe, Elizabeth, the one thing I would add to that is, in terms of the specific measures that you look for with respect to new business productivity, it's our seller is able to make their plan and how are they ramping against their plan. And we saw strengthen that in Q2 in most of the areas around the world where they were much closer to plan, and it's a lot better than it was in Q1.

Operator

Our next question comes from the line of Jason Celino of KeyBanc Capital Markets.

Jason Celino

I just wanted to ask about your EBA visibility. I think in the prepared remarks, Janesh, you said that this was kind of a factor of maybe marrying scenarios of what you can see this year. I'm curious like as we approach the second half, what types of renewal activity or expansion activity you're seeing with some of your cohorts?

Janesh Moorjani

Jason, fiscal '27 includes our largest EBA renewal cohort, and there's a big concentration of those EBAs in Q4. And if I think about that in terms of just cohort dynamics, you'll recall that last year, we had the biggest product subscription renewal cohort, and we also had our second largest EBA cohort. So there are some -- it does create a little bit of a tough year-on-year comp in terms of the size of the renewal cohorts in the back half of the year.

What I'd say is the prior full year outlook already reflected all of these cohort dynamics, and we've executed really well so far in terms of business that we closed in Q2 and preparation for the back half, and that gave us the confidence to raise the outlook for the year on billings even on an underlying basis.

Jason Celino

I see. Okay. And then maybe it's more of a relevant point. I know you reiterated your operating margin guide. But now that MaintainX is closed, curious what might be the operating margin impact in the quarter of the year or maybe historically what the margin profile looks like before you acquired it?

Janesh Moorjani

MaintainX was a high-growth business when we acquired it and still is. And consistent with many high-growth businesses, as you might imagine, the business was not profitable. And so as we bring MaintainX into Autodesk, our main focus is to ensure that we do everything that we can to continue to preserve the strong growth rate and continue to fuel the engine.

So MaintainX does present a drag on operating margin in fiscal '27. And then next year, we'll have the full year annual cost of MaintainX from an operating perspective and also in terms of the net financing costs. But despite that, as I mentioned in my prepared remarks, as I think about next year, we do expect that we will increase the operating margin next year from the 39% that we have this year.

Operator

Our next question comes from the line of Taylor McGinnis of UBS.

Taylor McGinnis

So you've done a nice job sustaining a consistent level of growth. But as we look beyond FY '27, Autodesk is going to start to lap a few tailwinds related to the model change and the transition to annual billings and a couple of the larger renewal cohorts that you talked about, which have all been beneficial to underlying growth. So as we think about that, is it possible that, that at some point, starts to become a headwind to billings growth? And if not, maybe you could just talk about the incremental growth drivers that you're excited about that could help support the growth durability that we've seen?

Janesh Moorjani

Taylor, this is Janesh. Maybe I'll take that question. So as we think about fiscal '28, there's a number of different moving parts, as you mentioned. And it's a little bit early to talk about '28, but I'll at least just highlight some of those moving parts for you. First off, as you know, fiscal '27 has some benefit from the new transaction model that will not recur in fiscal '28. So that's one factor to consider. And '28 will also include the full year contribution from MaintainX, as I just mentioned, both in terms of top line as well as the expenses.

We'll also have the continued normalization of new business productivity where as we continue to get better in Western Europe and the rest of the world, that will ultimately be a driver of the business for us. But underneath all of those moving pieces, the core drivers of the business remain strong. Renewals are strong. EBAs are strong. We are seeing sustained demand across areas like construction and infrastructure and industrial. We're excited about the opportunities in operations, both in terms of organic as well as continuing to build on the MaintainX acquisition.

So all of those factors, the consistent execution that we've had as a company for a while now for the past few years and that we're delivering here in fiscal '27, I think all of those underlying drivers will help us continue to sustain strength into '28 as well. We'll obviously give you a more full picture of all of the moving parts and timing and mix impacts and so forth when we get to that point. But the important piece for now is that fiscal '27 is playing out nicely. We've raised our guidance on both billings and on revenue, and we feel very good about the underlying momentum of the business.

Operator

Our next question comes from the line of Ken Wong of Oppenheimer & Company.

Hoi-Fung Wong

Andrew, I wanted to circle back to maintain now that you guys are integrating it into the business, how should we think about some of the go-to-market motions that might need to be tweaked? How much of the direct sales force will be impacted? Is this something that you guys will be able to push through to your partner network? Any color there and the possibility of any disruption from the integration that you guys are baking into the guidance?

Andrew Anagnost

Yes. We certainly take lots of things into the guidance to make sure that we're prudent in terms of what we tell you. At a high level, there's going -- we're going to -- short-term goal is maintain the momentum of the business. Very clear, okay? We want to make sure that we maintain the momentum in the business, is a good business. It's adding customers at a nice clip. We want to maintain some of that.

Like I said earlier, just like what we did in Construction, the enterprise account business is an immediate opportunity for synergies with regards to engaging deeper with some of those customers and getting MaintainX into some of those accounts. Frankly, they're not in those accounts. So I think there's a big opportunity there, and we want MaintainX to be able to exploit that avenue in terms of getting to our customers.

They've also built a great product-led machine that's targeting customers and new account acquisition. We want to maintain and leverage that machine or Autodesk, not only for MaintainX, but broadly across the Autodesk portfolio and look for us to do that because that expertise is valuable, and their product-led growth motion works incredibly well. Partners are absolutely going to be an opportunity here. Partners are going to be interested in this, especially as we start expanding the business into Europe, we'll probably be looking at motions with regards to engaging our partners.

Again, very similar to what we did with Construction. So look for us to basically copy some of the motions we did in the early days of Construction when we bought PlanGrid, and we bought BuildingConnected, but also learn from some of those motions and actually accelerate them faster than we did back in the days of Construction.

Hoi-Fung Wong

Got it. Super helpful. Janesh, I wanted to touch on that prior point you made about slight margin improvement in fiscal '28. I recall you guys had embedded kind of not necessarily MaintainX specifically, but the possibility of M&A into the guidance kind of this year and longer term. Should we think something similar for '28 that should you guys kind of bundle on something on top of MaintainX after the fact that, that slight margin improvement has some cushion?

Janesh Moorjani

Ken, the way I would think about future acquisitions and the impact of those is just to go back to our overall approach in terms of operations. We're following the same playbook as we did in Construction where we laid down a cornerstone acquisition and then built around that with smaller tuck-in acquisitions. And for us, in operations, MaintainX was that cornerstone acquisition and future acquisitions will probably be smaller in size, and we'll just build around that. So I would look at the fiscal '28 guidance on operating margin more specifically when we get to that point. But I would expect at this point that it will be an improvement over the 39% that we've laid out here for you today.

Operator

Our next question comes from the line of Matt Martino of Goldman Sachs.

Matthew Martino

Andrew, maybe to start with you. As Autodesk moves from task level AI towards broader workflow automation, what in your mind are the key technology and data unlocks still required? And where do you believe the platform is furthest along today?

Andrew Anagnost

Yes. The key thing that drives the workflow automation is what we're building into the Assistant. The Assistant is kind of the integration layer that allows us to bring the context we have about what the customer is doing at each spot and also bring the right models to bear. So the more the users engage with the Assistant, the deeper they engage with Assistant, the more workflow-driven automations we introduce in. You'll see some indications of that at AU, but the front door for these things is the Assistant and its agentic layers that we've built out there. The deeper the usage there, the more you're going to see us extending into the workflow side of the expansion there.

And what was the second part of your question? I'm sorry, could you repeat that, Matt?

Matthew Martino

Yes, where the platform is furthest along today?

Andrew Anagnost

Okay. Fusion is definitely one of the areas where we've invested quite a bit of effort to get the platform integrating various capabilities. The Assistant obviously, as part of the core platform that's built across horizontally, across Autodesk, but Fusion has definitely moved aggressively to deliver value through the Assistant so that the customers can start to look at workflow-type automations and actually engage in workflow type transactions. I think you'll see some of those showing up first in Fusion.

Matthew Martino

Great. And if I could just slip in a quick one on the macro, Andrew. The broader Construction backdrop has been fairly uneven, but Forma for Construction seems to be showing pretty good momentum here. So maybe just unpack sort of what's driving that resilience and where you're beginning to see maybe even early signs of improvement across some of these pockets of the end market.

Andrew Anagnost

So we're super happy with our Construction business. It's growing north of 20%. We like what we see. I want to be super clear about a few things here. we're very diversified. We're diversified globally. We're diversified across all the segments of Construction. That diversification is an absolute strength. The other thing is Construction is kind of reverting back to the mean in terms of backlogs. We're completely fine with that because the real underlying driver of growth is not the oscillations and the various metrics you're seeing. It's the fact that the penetration of technology in construction is so low right now.

What's driving our business right now is people like what we're doing. They like what they're getting from Design and Make integration. They like what we're doing with preconstruction. They're adopting technology at higher rates because technology allows them to deal with their backlog, to unlock their capacity and be able to build things more sustainably across the whole spectrum of customer types that we serve. That's the underlying thing here is the technology adoption cycle. It's not the ups and downs of what you see with various metrics in the Construction space.

Operator

Our next question comes from the line of Tyler Radke of Citi.

Tyler Radke

Maybe just at a high level, like with these disclosure changes, Janesh, I guess, why now? Why sort of midway through the year? And I think there's a lot of good momentum in the construction business. You talked about a leading organization choosing Autodesk Construction this quarter. So can you just be a little bit more specific on how you'll be updating us on the progress of that and the metrics that you'll share?

Janesh Moorjani

Tyler, I'm happy to. In terms of the why now, it's really got to do with the launch of the operations business, right? With closing of MaintainX, we needed to revisit our product family reporting. So that's the short answer on the why now. But as I think about that Design and Make, ultimately, our focus is on driving convergence across design, make and operate. And the more successful we are with that strategy, the less sense it makes to have discrete buckets on Design and Make or anything else.

So Construction is reported today under the Make business, but even that doesn't entirely capture all the Construction business. And so it's really important for us to make sure that as we move forward, we are providing you with a view on how the underlying businesses are performing. So we will provide you with regular updates on that business. It will be a regular commentary just like we have today, we will tell you how the business has been growing. It's growing north of 20% and has done for some time.

And then specific to Fusion and operations, we'll also provide you with regular commentary on those. And then as I said, we will provide MaintainX revenue for 4 quarters to give you visibility into how that business is doing.

Tyler Radke

Great. And on the MaintainX front, just sort of thinking about your goals from a financial perspective in synergies, I think the time of the acquisition, you talked about 50% plus growth, $135 million or so of ARR, if I'm not mistaken. Like is your goal to meaningfully reaccelerate that? Obviously, you don't want to disrupt a lot of the momentum they have, but at the same time, you have massive distribution and probably a lot of customers that are -- could get value by deploying MaintainX. So how should we just think about those revenue synergy goals over the next couple of years?

Janesh Moorjani

Yes. MaintainX already has very strong stand-alone growth momentum, Tyler. And for us, the strategic value that it gives us is the new operational entry point into teams that are responsible for maintaining and operating assets every day. I think there's multiple vectors in terms of revenue synergy opportunities.

The first is extending MaintainX through our global reach across customers of all sizes. So there's significant geographic opportunities in terms of expansion. But there's also opportunity with many of our larger enterprise customers and elevating MaintainX presence in those accounts. We also see the ability to extend across different industries. A lot of MaintainX customers today are more manufacturing centric, but there's a massive opportunity across AEC as well.

And then ultimately, connecting operations workflows through the Design and Make platform into operate and closing that full life cycle. So customers can manage across the entire life cycle. And all of those things help us. In addition to that, we talked about the benefits in terms of how that accelerates our overall AI strategy as well. So there's all of those revenue synergy vectors.

But as you mentioned, I think the most important piece for us is to make sure that we first preserve the existing growth rate and that we very thoughtfully and deliberately expand over time across these vectors to continue to deliver greater growth in that business.

Operator

Thank you. That is all the time we have for Q&A today. I would now like to turn the [indiscernible]

Simon Mays-Smith

Thanks, Latif, and thanks, everyone, for joining us. We'll look forward to seeing many of you on the road or at conferences over the coming weeks. If you have any questions in the meantime, please contact me or my team. Thanks very much.

Operator

This concludes today's conference call. Thank you for participating. You may now disconnect.