IPG Photonics (IPGP) Q3 2026 Earnings Call: Revenue Rises 15%, Advanced Solutions Grow 33%

IPG Photonics (NASDAQ: IPGP) reported a fourth consecutive quarter of double-digit revenue growth in Q3 2026. Welding, semiconductor and defense applications drove the increase, while management’s Q4 outlook incorporates moderating battery capacity additions in China.

Key Takeaways

• Q3 revenue rose 15% year over year and 3% sequentially to $288 million, with Industrial Solutions and Advanced Solutions both contributing to growth.
• Industrial Solutions revenue increased 12% year over year, led by welding and additive manufacturing. Advanced Solutions grew 33% year over year and 15% sequentially, driven primarily by defense and semiconductor applications.
• Adjusted gross margin reached 41%, including a $5 million net benefit from tariff refunds that added approximately 170 basis points. Adjusted EPS was $0.61, and adjusted EBITDA was $52 million.
• Semiconductor application revenue more than doubled year over year. IPG said it is qualified for next-generation lithography, metrology and inspection tools at several top-tier wafer equipment manufacturers.
• Book-to-bill was approximately 1. Management cited solid demand across most markets but expects near-term moderation in battery capacity additions in China.
• For Q4 2026, management guided to revenue of $265 million to $295 million and adjusted EPS of $0.30 to $0.60. The outlook excludes any contribution from the pending Lumibird Medical acquisition.

Core Financial Results

Business and Operating Performance

Industrial Solutions

Industrial Solutions revenue increased 12% year over year and 1% sequentially. Welding was the principal growth driver, supported by demand from battery manufacturing, general industrial markets and consumer electronics.

Management said its battery welding solutions support electric vehicles and stationary energy storage, including infrastructure serving data centers. However, the company is seeing some near-term moderation in battery capacity additions in China after several strong quarters.

Additive manufacturing also grew as customers adopted IPG’s beam-shaping and multi-beam technologies in aerospace, medical devices and consumer electronics. The company secured new business in Europe that management expects to contribute meaningfully to additive manufacturing revenue in 2027.

Cutting has become a smaller part of Industrial Solutions. Management said it does not expect meaningful growth in cutting, although it sees potential opportunities in 2027 and 2028.

Advanced Solutions

Advanced Solutions revenue rose 33% year over year and 15% sequentially. Semiconductor and defense applications were the main contributors.

Semiconductor revenue more than doubled from the prior year. IPG attributed demand to investments in advanced processes for GPUs, high-performance computing and high-bandwidth memory. Management expects the business to become a more meaningful part of Advanced Solutions over time as existing design wins ramp and the company participates in next-generation customer programs.

Defense revenue benefited from shipments of most of the Lockheed Martin order for the CROSSBOW directed-energy system. The remaining units are scheduled for Q4. IPG is pursuing additional opportunities and has expanded the product line with CROSSBOW SE, which offers longer range and addresses larger drones.

Medical revenue increased slightly year over year and improved significantly sequentially as new products and a new customer began to ramp. Consumables also performed well. Management reiterated its expectation that the existing medical business could double over the next two to three years.

IPG expects to close its acquisition of Lumibird Medical in Q4. Management said the combination would expand its medical addressable market to more than $2 billion, add leading positions in ophthalmology and urology, and be accretive in 2027.

Regional Performance

• North America: Revenue increased 33% year over year and 14% sequentially, led by welding and defense, with sequential contributions from medical, cleaning, cutting and additive manufacturing.
• Europe: Revenue declined 1% year over year but rose 4% sequentially. Lower annual cutting and welding sales were partly offset by additive manufacturing and semiconductor growth.
• Asia: Revenue increased 14% year over year and was flat sequentially, primarily reflecting welding growth.

Management Guidance

Management does not anticipate a meaningful tariff refund benefit in Q4. The guidance also excludes any contribution from Lumibird Medical.

CFO Tim Mammen said an adjusted gross margin of approximately 39% is a reasonable near-term reference point excluding tariff refunds. He added that higher-power diodes, smaller product form factors, manufacturing efficiencies and improved capacity utilization could produce more meaningful gross-margin gains in 2027.

Risks and Watchpoints

• Battery capacity additions in China are moderating after several strong quarters, creating a near-term headwind already reflected in Q4 guidance.
• Defense revenue may remain uneven because CROSSBOW orders and shipments can be lumpy.
• Q3 profitability benefited from $5 million in net tariff refunds, while Q4 guidance assumes no meaningful repeat benefit.
• Lower fixed-cost absorption weighed on year-over-year margins, and management said progress toward several hundred basis points of potential improvement remains gradual.
• The Lumibird Medical transaction had not yet closed, and Q4 guidance assumes no acquisition contribution.
• Operating expenses are expected to rise modestly as IPG continues investing in multiple growth initiatives.

Analyst Q&A Highlights

Management said overall book-to-bill remained approximately 1 despite weaker near-term Chinese battery capacity additions, supported by demand across other markets and regions.

On Advanced Solutions, IPG expects semiconductor, medical and defense opportunities to support long-term growth despite potential gaps between major defense orders. Semiconductor design wins are considered particularly attractive because they can remain embedded in customer platforms and build over time.

On margins, management indicated that Q3 adjusted gross margin would have been approximately 39.3% without tariff refunds. The Q4 midpoint of 38.5% mainly reflects lower expected revenue and the absence of the refund benefit.

Management identified medical, defense, semiconductor, micromachining, welding and additive manufacturing as its principal growth initiatives. Organic investment remains the first capital-allocation priority, supplemented by disciplined bolt-on acquisitions and share repurchases. IPG has $100 million remaining under its current repurchase authorization.

IPG plans to hold an Investor Day in New York City on March 2, 2027, where management intends to provide a deeper strategy review and long-term financial targets.

Full Earnings Call Transcript

Complete Earnings Call Transcript

Management Remarks

Operator

Good morning, and welcome to IPG Photonics Third Quarter 2026 Conference Call. Today's call is being recorded and webcast. At this time, I'd like to turn the call over to your host, Eugene Fedotoff, IPG's Senior Director, Investor Relations, for introductions. Please go ahead with your conference.

Eugene Fedotoff

Thank you, and good morning, everyone. With me today is IPG Photonics CEO, Dr. Mark Gitin; and Senior Vice President and CFO, Tim Mammen. On today's call, Mark will provide a summary of our third quarter results as well as the overview of demand environment and then walk you through the progress we are making on our long-term strategy. After that, he will turn it over to Tim to provide financial details.

Let me remind you that statements made during this call that discuss our expectations or predictions of the future are forward-looking statements. These forward-looking statements are subject to risks and uncertainties that could cause the company's actual results to differ materially from those projected in these forward-looking statements. These risks and uncertainties are detailed in our Form 10-K for the period ended December 31, 2025, and other reports filed with the Securities and Exchange Commission. Any forward-looking statements made on this call are the company's expectations or predictions as of today, November 1, 2026, only, and the company assumes no obligation to publicly release any updates or revisions to any such statements.

During this call, we will be referencing certain non-GAAP measures. For more information on how we find these non-GAAP measures and a reconciliation of such measures to the most directly comparable GAAP measures as well as additional details on our reported results, please refer to the earnings press release, earnings call presentation and the financial data workbook posted on our Investor Relations website. We will also post these prepared remarks on our website after this call.

With that, I'll now turn the call over to Mark.

Mark Gitin

Thanks, Eugene. Good morning, everyone. Our third quarter revenue increased 15% year-over-year making it the fourth consecutive quarter of double-digit revenue growth with both Industrial Solutions and Advanced Solutions contributing to the results. Our adjusted EBITDA and adjusted EPS also improved. This reflects continued progress in executing our strategy, driving sustainable, profitable growth through technological leadership, product innovation, operational excellence and disciplined capital allocation.

Customers continue to adopt our differentiated solutions across several strategic growth markets. We saw strong growth in our Industrial Solutions particularly in welding applications, where our laser technology, beam delivery, process monitoring and applications expertise provide meaningful competitive advantages. We remain focused on helping customers improve productivity, quality and manufacturing economics to advanced laser-based integrated solutions. We've also made good progress in advanced solutions driving our laser and photonics technologies into attractive high-growth markets.

Let's look more closely at revenue by application and the meaningful progress we are making in our strategic growth initiatives. Starting with Industrial Solutions. Revenue increased 12% year-over-year, driven by strong growth in welding and additive manufacturing applications. Across these and other markets, we are strengthening our leadership by expanding laser adoption, displacing incumbent technologies and moving up the value chain with differentiated subsystem and system solutions. Our welding revenue benefited from higher demand in battery manufacturing, general industrial and consumer electronics in the third quarter.

The production of advanced batteries for electric vehicles and stationary energy storage systems involves a range of demanding welding requirements that significantly impact battery performance, safety and manufacturing efficiency. Our solutions are critical for high-capacity battery applications used in energy storage, supporting global electrification and growing energy infrastructure build-out, including for data centers. We are a leader in this space and are excited about the long-term trajectory for battery growth.

At the same time, we are encouraged by the strong growth in our welding solutions in other areas such as consumer electronics and industrial markets. In additive manufacturing, we saw increasing momentum as customers continue to adopt this technology for industries such as aerospace, medical device manufacturing and consumer electronics. Our beam shaping and multi-beam technologies, high-beam stability and applications expertise are delivering improvements in throughput and cost per part. This quarter, we secured new business in Europe that we expect to meaningfully contribute to our additive manufacturing revenue in 2027.

Moving to Advanced Solutions. Revenue improved 33% year-over-year and 15% sequentially as we continue to expand our technology leadership into attractive, high-growth markets focusing on medical, defense, semiconductor and micro-machining. Revenue growth in semiconductor and defense applications were the major drivers behind our results this quarter. In semiconductor applications, revenue continued to accelerate and more than double year-over-year. As device complexity increases and feature size decreases, semiconductor manufacturers are investing in advanced process technologies to meet growing demand for GPUs, high-performance computing and high-bandwidth memory. With our differentiated laser solutions, we are a critical supplier to a number of top-tier wafer equipment manufacturers where we are qualified for the next-generation lithography, metrology and inspection tools.

Defense revenue was also a large contributor in the year-over-year growth in Advanced Solutions in the third quarter as we ship most of the Lockheed Martin order for CROSSBOW. The remaining shipments will be delivered in the fourth quarter, and we are actively pursuing multiple additional opportunities. We remain encouraged by customer engagement and the growing recognition of our expanded portfolio of CROSSBOW directed energy systems as an effective, ready to ship and cost-efficient solution for countering evolving UAS threats.

While this market remains in its early stages and revenue can be lumpy in the short term, we believe our technology leadership decades of directed energy laser expertise and commercial laser and systems manufacturing capabilities enable us to establish leading positions in these opportunities. Moving to Medical. Our business continued to perform well during the quarter, supported by strong customer demand, new product shipments and ongoing adoption of our technologies across multiple applications. We are building on our long history of medical innovation and laser expertise by expanding our leading thulium fiber laser platform, with next-generation systems for urology applications.

Last quarter, we announced the acquisition of Lumibird Medical, an important milestone in the execution of our strategy to expand our business in attractive high-margin medical markets. The addition of Lumibird Medical creates a scaled medical laser platform with leading positions in ophthalmology and urology, expands our medical addressable market to more than $2 billion, enhances our Advanced Solutions portfolio and strengthens our long-term growth and profitability profile. The acquisition is expected to close in the fourth quarter. We are pleased with the initial integration planning and preparation and are excited about the long-term opportunities to leverage our complementary technologies, applications expertise, commercial capabilities and innovative culture to drive future value creation. I look forward to working with the Lumibird Medical team to accelerate growth and innovation across our medical business.

In summary, we achieved another quarter of double-digit year-over-year growth, above the midpoint of our guidance range. Customer demand for our unique solutions has strengthened across most markets. Orders also remained strong with book-to-bill of approximately 1. We continue to make meaningful progress on our strategic objectives, delivering profitable growth and creating sustained long-term shareholder value. Finally, I'm pleased to announce that we plan to host Investor Day on Tuesday, March 2, 2027, in New York City. We look forward to sharing a deeper review of our strategy and long-term financial targets. Details will be announced soon. Please mark your calendars and plan to join us for this event.

With that, I will now turn the call over to Tim.

Timothy P.V. Mammen

Thank you, Mark, and good morning, everyone. My comments will generally follow the earnings call presentation, which is available on our Investor Relations website. I will start with revenue trends by application on Slide 4. Industrial Solutions revenue increased 12% year-over-year and 1% sequentially in the third quarter, driven by growth in welding and additive manufacturing applications. Advanced Solutions revenue increased 33% year-over-year and 15% sequentially on strong growth in defense and semiconductor applications. Sales of our emerging growth products accounted for 52% and of our total revenue in the third quarter, down from 58% in the prior quarter due to product mix.

Moving to revenue performance by region on Slide 5. North American revenue was up 14% sequentially due to increased sales in defense, medical, cleaning, cutting and additive manufacturing. Revenue increased 33% compared with last year, primarily on growth in welding and defense applications. European sales declined 1% year-over-year due to lower cutting and welding revenue, partially offset by increased revenue in additive manufacturing and semiconductor applications. Revenue was up 4% sequentially, driven by improved cutting and welding revenue as well as continued growth in semiconductor applications.

Revenue in Asia was flat sequentially and increased 14% year-over-year, driven by growth in welding.

Moving to a detailed review of financial performance on Slide 6. Total revenue was $288 million, up 15% year-over-year and 3% sequentially. Foreign currency benefited revenue by approximately 1% this quarter compared to the same period in the prior year. GAAP gross margin was 40.7%, and adjusted gross margin was 41%, above the top end of our guidance range. We recorded a $5 million net benefit from tariff refunds that had a positive impact on gross margin of approximately 170 basis points in the quarter. Lower cost of products sold helped margins in the quarter, was offset by lower fixed cost absorption on a year-over-year basis due to a significant build in inventory last year. Total adjusted operating expenses were $91 million, below our guidance range. While we are focused on controlling expenses, we still expect operating expenses to increase modestly going forward due to our continued investments in multiple growth opportunities.

GAAP operating income in the quarter was $21 million, and GAAP net income was $20 million or $0.40 -- $0.47 per diluted share. Adjusted operating income was $27 million, and adjusted net income was $26 million, with adjusted earnings per diluted share of $0.61. Adjusted EBITDA was $52 million. Both adjusted EPS and adjusted EBITDA came in at the top end of our expectations but also benefited from the $5 million in net tariff refunds. Excluding the tariff refund, both adjusted EBITDA and adjusted EPS improved year-over-year and sequentially and were above the midpoint of our guidance.

Moving to a summary of our balance sheet and cash flow statement on Slide 7. We ended the quarter with $926 million in cash, cash equivalents and short-term investments, with no debt. Cash flow from operations continued to improve, reaching $46 million in the third quarter. We spent $17 million on capital expenditures in the quarter, bringing year-to-date CapEx to $54 million. Our CapEx remains elevated this year due to investments in our major fiber manufacturing facility in Germany. Excluding the German investment, we expect CapEx to be at about 5% of revenue going forward.

Moving to our outlook on Slide 8. For the fourth quarter of 2026, we expect revenue of $265 million to $295 million. While we are seeing some moderation of battery capacity additions in China, after several strong quarters, we are very pleased with demand trends across other markets and regions, which are reflected in our book-to-bill of approximately 1. Adjusted gross margin is expected to be between 37% and 40% as we are not anticipating a meaningful benefit from tariff refunds. We estimate adjusted operating expenses in the range of $91 million to $94 million. For the fourth quarter, we expect to deliver adjusted earnings per diluted share in the range of $0.30 to $0.60, with approximately 43 million diluted common shares outstanding. Our adjusted EBITDA is expected to be between $33 million and $50 million. This guidance does not assume any contribution from the acquisition of Lumibird Medical.

In summary, we are pleased with our third quarter results, with growth in revenue and bookings as well as improvements in EBITDA and adjusted EPS. We believe that we are well positioned to continue improving our performance. We're seeing solid long-term demand trends across our markets and are gaining traction on initiatives to expand margins even as we continue to invest in the growth opportunities ahead.

I'll now turn the call back to Mark.

Mark Gitin

Thanks, Tim. We are pleased with our performance through the first 3 quarters of the year, driven by growth in both Industrial and Advanced Solutions. Our recently announced acquisition of Lumibird Medical accelerates our strategic evolution and considerably expands our advanced solutions portfolio into higher growth and higher-margin medical applications. We continue to execute our growth strategy, supported by operational excellence and an innovation engine that unlocks significant areas of opportunity. As we continue along this path, I'm increasingly confident in our ability to achieve above-market growth, expand margins and deliver lasting value for our customers and shareholders.

With that, we will be happy to take your questions.

Operator

[Operator Instructions] Our first question comes from Ruben Roy with Stifel.

Question-and-Answer Session

Ruben Roy

Tim, let's start with the comment you made on moderation in battery capacity additions in China. You've had several strong quarters, as you mentioned. Can you start with maybe talking about welding or total revenue related to China battery today? And how much of that sort of slowdown is built into the midpoint for Q4? And I guess, sorry, one more on that is, would you say the book-to-bill was above 1 outside of the China battery moderation?

Mark Gitin

Yes, I'll take that, Ruben. Good to hear from you. So after strong growth over the last several quarters, we're seeing some moderation, as mentioned in the China battery capacity additions. We see that as a near-term effect. We're not breaking it out specifically, but we have factored this into the guidance for Q4. Longer term, we're excited about the growth opportunity. And we certainly still see a lot of capacity to be added there. We've talked about the market drivers there before, the electric vehicles, but also stationary storage, where that drives great electrification. Of course, data centers are a key driver there. And we have a very strong competitive position there with our technology solution. And as was mentioned in the prepared remarks, overall, we're seeing strong growth across most of our markets and regions, and that's giving us still a book-to-bill of 1.

Ruben Roy

Okay. Understood, Mark. On the Advanced Solutions, it sounds like you shipped most of the Lockheed across the order in Q3. You've got some coming up in Q4. Are you expecting a little bit of a gap? I know you mentioned this is a lumpy business, obviously. But how are you thinking about defense in general for the first half of '27? And I know you have other opportunities in semiconductor and medical. Do you think you'll see growth in Advanced Solutions despite potentially some lumpiness post the Lockheed orders?

Mark Gitin

Yes. So first of all, as you said, we did ship much of the Lockheed order in Q3. And I want to say also we're shipping from production. We're completing the rest of the shipments this quarter. As you mentioned and I did, it's lumpy but very attractive longer term. We're seeing continued strong customer engagement and pipeline there. I want to say also that if you didn't see, we did launch an extension of the product line, it's called the SE, and that has longer range and addresses longer -- larger drones as well. We're very excited, and we have very strong momentum on the customer side there and see good future there going forward.

As far as the rest of Advanced Solutions, we've talked about that. Semiconductor is a very strong area for us now. It's smaller, but it's growing quite fast. It doubled year-over-year. We have very good engagement with Tier 1 sub equipment players where we're being designed into their products, solving really key problems there. And that, of course, has the drive of data centers and AI, and that's an area I love also because the winds are sticky and they stack on each other over time. So that's a key one.

Medical, we've talked about urology, the urology platform and the growth that we're expecting there. New customer came on last year. We have a great platform for growth there. And remember, we've talked about that, that business doubling over the next 2 to 3 years. Medical is very strong. Of course, we're bringing Lumibird in, finishing that acquisition. We're really excited about what that will bring. The combination of the 2 brings some significant growth. And remember that Lumibird will be accretive in 2027 in the first year. There's new products that have already been announced, the first new product from Lumibird. So lots of exciting things going on there, in our Advanced area. So we're expecting growth in both our Advanced and our Industrial Solutions over time.

Ruben Roy

Okay. Just one more for Tim. On the gross margins, if we take out the tariff refunds in Q3, it looks like adjusted gross margins would have been around 39.3%. Your midpoint for fourth quarter is 38.5%. So can you talk about what accounts for the other 80 or so basis points lower on the gross margin? Is that mix absorption, et cetera? And is sort of the 39% level the right starting point to think about as you get into 2027?

Timothy P.V. Mammen

Yes. So your math is very good. I would say 39.3% is the adjusted excluding tariff. That reflects revenue that was [ $287 million ], right. So at the midpoint, our revenue is $280 million, and that actually -- the 38.5%, sorry, ties right in with what was reported on the third quarter Ruben. And yes, I'd say we're sort of more consistent here at this kind of like 39% range, and there's a tremendous amount of work that's continuing to be done in note -- 3 of the areas that I've talked about where it's optimizing the value of the product that we're delivering, continuing to get cost reductions with our new higher power diodes, which change in turn the form factor of the product, right? We're starting to roll those out more meaningfully.

And then there's a lot of work continuing on optimizing manufacturing efficiency, utilization, looking at lower cost areas to make some parts, and that we want to drive improved absorption we still see several hundred basis points of gain that we can get from that. So we're making good progress. It's a bit slow to get there, but I think we're starting to get to the point where more meaningful gains in gross margin should materialize in 2027.

Operator

Our next question comes from James Ricchiuti with Needham & Company.

James Ricchiuti

I wonder if you could -- you may have given it the medical growth in the quarter. How big a contributor was that to the overall growth in Advanced Solutions? Because as I recall, I think you were anticipating a pickup in the second half, maybe that's [indiscernible] the new customer.

Timothy P.V. Mammen

Medical increased slightly year-over-year but improved significantly sequentially, which would be the pickup in the second half. We're starting to see the ramp on some of the new product introductions and the new customer. The consumable business is also performing well, and we're expecting that, obviously, to continue into Q4 for both the hardware and the consumable. And then as Mark said that we expect medical to be a nice growth driver for Advanced Solutions next year, Jim. So yes, we're seeing that pick up in the second half of the year that we thought we would.

James Ricchiuti

Okay. Got it. And just on the Industrial Solutions, nice growth there. And I'm wondering, the bigger part of that I think, is still cutting, and correct me if I'm wrong, but what kind of growth did you see in cutting? I assume modest versus what you described in welding and additives. But maybe if you could frame that a little better for us.

Timothy P.V. Mammen

The main application is really welding these days that drives the underlying Industrial Solutions. There is still a cutting business there, but it's, we've said before, I think last year, less than 20% of total revenue. It's very small in China. The other main applications that are still material would be the additive manufacturing, which globally is doing quite well. That's both in Asia, Europe. And North America, we've had good performance out of that. We're continuing to get good traction and make progress on cleaning applications. There is actually a marking engraving business, which is still a reasonable size, that can perform well when different markets are stronger there. And then, yes, the cutting is a smaller part of the business and not one where we expect any meaningful growth on it, although we're actually defending our position there and have got some opportunities in '27 and '28 that could be a little bit more positive.

Mark Gitin

Just to remind you, Jim -- go ahead.

James Ricchiuti

No, I was just going to say that the growth that you saw in China was really driven for the most part welding and additive. And cutting, as you described this as a much solar part of the business, but that was really the driver. You showed pretty healthy growth. It looks like year-over-year in China.

Timothy P.V. Mammen

Yes, it's primarily welding. Additive manufacturing in China. Margin can be good at. The cutting is a small part of that business. The flat metal cutting is very small in China. .

James Ricchiuti

I'm sorry, Mark, go ahead. .

Mark Gitin

We covered it there.

Operator

Our next question comes from Scott Graham with Seaport Research Partners.

Scott Graham

So kind of like 140,000 footer free you. Mark, you got a better set of industrial -- general industrial end markets, obviously, certainly in the U.S., maybe not as much in Europe, but that's supposed to improve. I'm just wondering, with that general industrial being your sort of your largest vertical, how are you approaching getting customers to trade up to fine, right? You talk about a couple of elements of how the market may be starting to move up. But how are you showing a value proposition there? This is just a significant runway here for you guys on this. And it's just been very slow in the coming. So how are you approaching that?

Mark Gitin

Yes. So Scott, good to hear from you. Yes, we're very encouraged by the growth that we're seeing in the Industrial Solutions. Areas that we're seeing growth, Tim mentioned some of this. Certainly, we're seeing growth in welding, additive manufacturing, cleaning. Those are all areas that are strong and growing in the U.S. in that industrial space. On the welding, a lot of this comes down to the applications expertise. We are world experts in applications. We have a large number in the U.S., and globally, we have nearly 100 applications engineers. That piece is really critical, especially for welding, developing the key applications there. And then being able to get the solution to the customer, whether it's a laser or a subsystem or a system, is part of our growth expertise there. And that's on the whether it's welding, whether it's cleaning.

And then if you look at additive manufacturing, there, the customers are moving to additive manufacturing because we're helping to drive the cost per part. So if you look at additive manufacturing, we develop lasers with special modes. You've heard us talk about a ring mode and also with multiple outputs. When those are incorporated into the additive manufacturing systems, it drops the cost per part and allows expansion into new areas, where a lot of that started in areas of defense and aerospace. Now that's expanding into areas of medical devices and even into consumer electronics. So the application piece that we're working and then using that in really a virtuous cycle to drive the development of the lasers, subsystems and systems and being able to provide solutions to the customers is really what's driving our growth, and we'll continue to drive that at an outsized level.

Scott Graham

That's a very comprehensive answer. Just the other one was about inflation, and maybe this is more for you, Tim. What was pricing in the quarter? What was inflation? And how are you looking at that heading into 2027 with inflation so elevated, not just on materials, but also on freight?

Timothy P.V. Mammen

Yes. I mean, on freight, actually in term -- yes, let me step back a bit. There's always inflationary pressures every year that you have to deal with and you have to pay for, for example, merit increases. We got halfway through the year. So our costs actually went up a little bit in Q3 in relation to that. The material costs, 20% of our revenue is on material. So you have to deal with the inflationary cost there. We actually have a couple of things that we look at. We're obviously looking at how we optimize the value proposition of what we deliver to customers, right, and that involves the pricing. We are, in turn, as I mentioned, moving to higher power guidance, so that means for each dollar of output power, we need fewer diodes.

We actually can also then change the form factor of the laser. Like a 10-kilowatt laser today is much, much smaller than a 10-kilowatt laser was even 2 or 3 years ago, right? So you got less material going into that. And then we actually run programs internally where we call it "A Profit In Cash" program, where we're actually looking and how we can drive cost savings across different areas. Some of those are in operation. Some of these are in SG&A, OpEx. And we use those to try and fund some of the inflationary impacts of the business that are kind of imitable from each year.

Operator

Our next question comes from Keith Housum with Northcoast Research.

Keith Housum

Mark, I know asking you to pick your favorite as [indiscernible] me to pick your favorite children. But if you think about growth initiatives in the next 2 to 3 years, what do you think are the top 2 or 3 growth initiatives that I kind of -- are your favorite, that you think will have the biggest impact on IPG as we look going forward? .

Mark Gitin

As you said, difficult to pick among the children, but let me just say that we're excited about growth opportunities in both the Industrial Solutions and the Advanced Solutions. I'll start in Advance. Of course, we've talked about the medical and the great roadmap that we have there in urology. We picked up a new customer last year. We have a great road map for growth, and we've talked about that doubling over the next 2 to 3 years. Remember then, we're in the midst of cleaning the acquisition of Lumibird Medical, and Lumibird Medical is going to add to that. That's accretive in the first year, has great growth potential on that piece. And certainly, the combination of Lumibird Medical and our urology, that expands the SAM significantly. So that's above $2 billion and gives us a great platform to grow on.

The other piece, again, I'll name a couple. We've talked about defense. We're making great progress with the CROSSBOW. I mentioned that we have the new product line that's addition that we have, the SE, which gets us long range and crosses into drones, and we have great customer interest from that product line and certainly have good expectations for that area. Semiconductor, that's going well. Again, we have great -- we've been embedded now in key customer programs and products now in major front-end players in metrology, inspection and lithography. We're seeing the benefits there. And we've built out the capability there not only in the technology that we've always had, but now in the quality systems and manufacturing systems to be able to drive that forward. So excited about that area.

And then at micromachining, we have great products in process there, great technology to get us into the shorter pulses and into some of the exciting areas in microelectronics and micromachining and medical devices. Those are all real key areas that we see for growth there in the advanced. And then I don't want to forget the areas that we're driving also in the Industrial Solutions. We have great programs there, and we're seeing some of the benefits that we've talked about, not only in welding, but also in additive. I talked about that a bit earlier. So overall, I see great opportunities for growth for the company going forward on these new areas that we're driving.

Keith Housum

Great. Great. And I know Lumibird acquisition hasn't been closed yet. So many of my questions are premature. But how are you guys thinking about M&A from here? Do you need to take a pause as you guys integrate Lumibird? Or is it still an active process that you guys want to do more here, quickly?

Mark Gitin

Yes. So happy to talk about that. First, let me just step back and frame it with our capital allocation strategy here. First and foremost, it's investing in our organic programs, it's the ones that we talked about here in both Industrial and Advanced and the opportunities that we have to grow with organic programs. And then the inorganic piece, right, tuck-in or bolt-on acquisitions that can get us there faster or augment the markets. And we've seen success with that with clean laser, a fantastic integration team there, and that's really paying back very well now, with great new products combining the road maps of both [indiscernible] and our laser ronapps, having cleaning systems that are size and COGS.

And then Lumibird Medical, as you mentioned, great -- we've talked about the great fit there and how that's going to allow us to grow. We've got a really strong integration team on that. Now and all the integration planning there, we'll continue to look for opportunities, but we'll be very disciplined in our approach, but we have our arms around that. And then just to complete the capital allocation, we always balance that with with share repurchases. We did $1.5 billion over the past several years, and we have another $100 million authorized. We're just excited to have such a strong balance sheet and you see the free cash flow continues to be strong, and we've got great flexibility and optionality going forward.

Operator

[Operator Instructions] Our next question comes from Jim Ricchiuti with Needham.

James Ricchiuti

I just had a follow-up question on semi. I know it's a small part of the overall business. I'm guessing, what, less than 5% or so. But as we think about the [indiscernible] market in '27 and looking out to '28, we're talking, I guess, the numbers being out, thrown at [ 35% ] or so growth in [indiscernible] in '27. Is this a business, Mark, that you see becoming a more meaningful part of the Advanced Solutions revenue base going forward?

Mark Gitin

Yes, Jim, graduate that. I have to say I'm very encouraged by the progress that we're making in semi. I mean this is something that I really focused on when I came in because of my experience in that area. And this is an area where the technology was always there. We have some neat technologies in the company that the [ WFE ] players were interested in. But what we've been able to do now is transition that into design wins in the programs because we put in the other key pieces that you need there, the quality systems, the manufacturing systems, to be able to really engage and supply that market. And that's why we're seeing it.

As the numbers you talked about are -- it is, again, a smaller piece, but you can see that we've now doubled that year-over-year. And we see good opportunity to continue to grow that business, both in the areas that we have design wins now from the growth of the markets, as you talked about, driven by AI and data centers and those things. We're in those newer programs, and we continue to work with these companies on next-generation area. So longer term, I think this can become a more meaningful part of the business for sure. It's a great area. The technology is there, and we're making that crossover.

James Ricchiuti

And maybe just on that topic of crossover that you raised. As we think of -- I don't want to front run your Analyst Day coming up in early next year. But as you think about CROSSBOW and the opportunity in Defense, is there any color you can provide or maybe just broad expectations as to how we should think about that business looking out to '27 and '28, recognizing, right now, it's small, it's lumpy? But how should we think about the potential for CROSSBOW from what you've seen so far? I mean, obviously, you're shipping -- finishing the big order with Lockheed. But beyond that, how do we think about it?

Mark Gitin

Yes, Jim, I'm really optimistic about the CROSSBOW business. As I mentioned, we have very good engagement. We have -- as I mentioned, we've now extended the product line. So that's the next piece of the product line with the SE product. That now gives us both longer range and crosses over into some of the larger drone classes as well. We're shipping from production, which is really key as well because we can react quickly. And I would say that the customer engagements are very, very good and the programs that we're discussing and working with their large programs, and we're excited about where that can go. The product is working. It's been tested in multiple environments, as I talked about. And again, we're excited about where that can go.

Operator

We have reached the end of the question-and-answer session. I would now like to turn the call back over to Eugene Fedotoff for closing comments.

Eugene Fedotoff

Thank you for joining us this morning and your continued interest in IPG. We will be participating in several investor events this quarter and are looking forward to speaking with you again soon. Have a great day, everyone. .

Operator

This concludes today's conference. You may disconnect your lines at this time, and we thank you for your participation.